Question about Washing Machines

2 Answers

Shacking washing machine in spin cycle

When the washer is in spin cycle it shacked the whole area really bad. I have set the legs and it still does it no nmatter what

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 460 Answers

The solution can be (1) or (2)

(1) is over louded the washer machine
(2)the leg mus be one inch all 4 plus be sure that is in a flat floor.

Hope this solve your problem

Posted on May 07, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 20 Answers

The balance weight might have come loose.

Posted on May 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My washing machine is off balance when it is spin cycle


You may be loading it with stuff too lopsided.

Aug 08, 2014 | Whirlpool Washing Machines

1 Answer

The washer bounces really bad on the high spin cycle


Your washer may not be leveled properly. Use the adjustable legs to level your washer so it doesnt shake too much on high spin.

Oct 19, 2012 | Danby DWM5500W-1 Energy Star 1.69 Cu.Ft....

1 Answer

The washer bounces really bad during the high spin cycle


your suspension legs on the machine are worn,, you will need to replace them

Oct 19, 2012 | Danby DWM5500W Front Load Washer

1 Answer

My washer shacks really bad


This is caused by an unbalanced load. Open the lid and distribute the clothes evenly, and it should then spin smoothly.

May 04, 2011 | Washing Machines

1 Answer

Excesive Shaking during spin cycle


Your washer has self adjusting rear legs . Tilt the machine foreward and look at the back legs . If one is stuck in , use a screwdrive and pry it out till both legs are in the out position . Set washer back down slowly and the rear legs will automatically adjust .

May 02, 2010 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Why does my washer shack when in spin cycle even when


You have a worn part, I don't know what your manufacture has chosen to call it. This part is used to control the agitation and spin balance of your washer. It's not that easy of a part to change, you have to take the tub out in order to access it. If it's not replaced your problem will continue to get worse until completely ruins your washer. As I recall it cost us between $100 and $150 to have it replaced on our washer.

Mar 29, 2010 | Frigidaire GLET1031 Top Load Stacked...

1 Answer

Spin cycle shakes whole washing machine


have you tightened the jamb nuts on the legs after leveling the machine so they can't move from where you set them initially when you leveled the unit?

Mar 21, 2010 | Kenmore HE2 Plus Front Load Washer

1 Answer

CLOTHES STILL WET AFTER SPIN CYCLE


Dear dgloss1856, Sun 4-12-2009 1:14PM EST USA

Washers will shut down automatically without completing the spin cycle for two reasons.
1) Too many clothes in the washer at once (overloading with clothes) !
2) Too much soap in the washer when washing!

When this happens you should restart the machine in the spin cycle or if you can't start in spin run a full cycle without adding soap.

If this doesn't solve the problem you may need to clean the timer or control circuits depending on your machine by cleaning with electronic spray cleaner (available at Radio Shack) by spraying the timer or control circuits as instructed on the can of electronic cleaner.

cd1ee64.jpgLet me know if I can be of further assistance!

Apr 12, 2009 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

77186 Answers

Brad Brown

Level 3 Expert

16397 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...