Ergohuman chair noise

Your electronic wheel chair may have a joystick that's too tight, something may need to be loosened to allow for a more fluid motion.https://greatbritishmobility.co.uk/electronic-wheel-chair

Your chair is NEW! So, return your chair to the store where you bought it and complain!

use grease. wd40 is a penatrant not a lube

This noise can vary depending where its coming from .If its coming from the front of the chair it could be your front wheels may have bad bearings that make the click each time you move .Or if its coming From the back it could be you break engaging and dis engaging. I would proably look at the casters first .


Good luck .

If you can not get it fixed would love to purchase the controller and cord for $300. Let me know [email protected]

You may want to check the bearings in the casters, that can cause a scrubbing noise and cause the chair to not turn well.

If there is a chirping noise, that may indicate a motor failure. There is a left and right motor, so if one is not working well, it can cause the power chair to not drive straight.

Try a few things. First, push the reset button located on the bottom of chair right next to the foot rest. If that doesnt work, take the back outer covering of the chair and disconenct the battery connector and wait a few minutes then reconnect it. Also check the 50 amp fuse located behing the foot rest, take the pin off the bottom of the foot rest and expose the batteris and you will see the fuse.

Sounds like your motors are gong out. You`ll need to get to a reputable dealer for further diagnosis.

Hi this is Sachin , spray on the piston the silicon spary and leave for some time the grinding noise will be eliminated