Question about Marantz SR8001

Open Question

Standby light rapidly blinking on SR8001 - Marantz SR8001

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: Marantz sr8001: standby light blinks rapidly,

Hello there Ed.

For anyone that has ever had such an issue with a MARANTZ SR series (6001. 7001. 7002. 8001...etc...) issue a question and I do HAVE the answer.

I could be just anything, or just the low quality binding posts used by MARANTZ for that.

Please describe to me in details how you've connected your speaker wires at the back, and give me description when and how did this problem came up.

Kind regards
Evangelos

Posted on Nov 04, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What do 5 rapid blinking power LEDs then two slower mean?


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/

Aug 15, 2015 | Sharp Televison & Video

1 Answer

For no reason I know of, my Marantz SR8001 will not come on and the display will not light up. It will not respond to activation using the power button on the display panel, or the power activator on the...


blinking power lights are a factory setting to inform the customer there is an internal electronic fault. and the unit needs to be repaired by a service pro in 99% of cases the owner can do nothing to fix it.

send it in

best luck

Oct 14, 2010 | Marantz SR8001

1 Answer

Hi, my Marantz sr8001 is on standby mode, can you show me how to reset standby mode. Thanks


Mine is doing the exact same thing! All I want to do is get it OUT of standby mode!

Sep 13, 2010 | Marantz SR8001

1 Answer

My Sony KDP57WS655 standby light blinks 11 times when first turned on. The sound comes on briefly but no picture; then the TV shuts off again. After that the standby light rapidly blinks 10 times, pauses,...


laisecorp,

You have a problem on the "D" board. If you understand electronics and soldering you should check transistor Q8014 and Q8013 for shorts, leakage or bad solder connections. If you find any problems replace the transistors and also check/replace R8051 and IC8005.

If you are not good at soldering or fixing electronics go to http://www.encompass.com and purshase the board, part number A-1065-548-A. The board is $150.00 US plus shipping.

Thanks for using FixYa and for the generous rating.

hardrocko

Aug 20, 2010 | Televison & Video

1 Answer

Marantz sr8001: standby light blinks rapidly,


Hello there Ed.

For anyone that has ever had such an issue with a MARANTZ SR series (6001. 7001. 7002. 8001...etc...) issue a question and I do HAVE the answer.

I could be just anything, or just the low quality binding posts used by MARANTZ for that.

Please describe to me in details how you've connected your speaker wires at the back, and give me description when and how did this problem came up.

Kind regards
Evangelos

Oct 17, 2009 | Marantz SR8001

1 Answer

Marantz SR8001fail to standby mode, will not reset


Test all your speaker impedances and check for shorts on both wiring and speakers. Use a digital multimeter. If you still have an issue, disconnect all speakers and test receiver. If you still have a problem, post a comment and I can help some more.

Aug 07, 2009 | Marantz SR8001

1 Answer

Standby red light just continuesly blinks, no picture -


TV TURNS ON 1-2 SEC SCREEN SHOWS COMPONENTNT1 AND TURNS OFF WITH A POP SOUND FRO9M SPKRS

May 17, 2009 | Akai LCT2701TD Television

1 Answer

Marantz SR6001 AV Surround Receiver - Blinking Standy Light


I have exactly the same problem! Sometimes when I turn the input dial it comes back on but this time it is out for good. I have tried re-wiring and unplugging etc. nothing seems to work.

Jan 21, 2009 | Marantz SR6001

3 Answers

Marantz SR6001 AV Surround Receiver - Blinking Standy Light


For resetting sr6001: When power lights blinking, press "clear" + "pure direct" + "7.1 ch input" simultaneously for 3 seconds.


iskender

Nov 10, 2008 | Marantz SR-7200 Receiver

1 Answer

TV won't stay on, Standby blinks 10 times


Its sort of silly, but my father got behind the tv and smacked it. The error message went away, and the tv is working fine now.
It wasn't easy for him to get behind it though, it's rather tall and weighs 234lbs.
I did manage to find a pdf file of the repair manual for this model at Techlore.com.

Mar 06, 2008 | Televison & Video

Not finding what you are looking for?
Marantz SR8001 Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Marantz Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

74185 Answers

 Grubhead
Grubhead

Level 3 Expert

5113 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Marantz Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...