Question about MicroBoards QD DVD 123 Burner

1 Answer

My QD-DVD Microboard burner, only three of the bays will burn CD's the other two will not.

Only three of the bays will burn CD. the other two will not. To begin with four of the five worked and now only three of them do. Now the screen says preparing, please wait have waited for 45 minutes. Am 69 years old and little slow on the up take. The manual is too complicated to understand. Plugged it into outlet and set it on dinning room table. Trying to burn around 250 Christmas CD's and having heck of a time with this process. Thanks, John R

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 101 Answers

Hey john, u must go to the website from Microboards

and there u must look for the latest firmware for your unit

when u found it than burn it on a cd or dvd

and than follow these instructions and u are set to go and the unit must work normal again

The Update Firmware feature is used to update the controller firmware.
1. To update the firmware: Place the firmware CD into the reader drive (top).

2. Press the ENT button

3. The display will show the current and update firmware
versions, as shown to the right:

4. Press the ENT button to complete the firmware update.
5. The duplicator will reboot automatically after installing the new firmware

Posted on Nov 25, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does it mean when I hit copy on my Microboards technology qd dvd 03 and it says no drivers found


It sounds like it's asking you to install a driver. You might try re-installing that.

Apr 27, 2014 | MicroBoards QD DVD 123 Burner

1 Answer

Dsr8880 microboard cd duplicator


Not reading the disc cant read the type of disc dry another type of disc, difference is plus or minus and speed x8 or x16 or x4 speed

Jan 03, 2014 | ASUS Computers & Internet

1 Answer

Target drive not ready


The burning drives are not recognizing the blank media.Try using all of the duplicator bays by burning to another drive bay. If all other drives burn fine then the one drive may need to be replaced.Try a different blank CD or using a different brand. The most common fault for this message is a bad blank disk.Finally clean the drive bays by using compressed air to blow any dust out of the system.

Dec 18, 2013 | ProDuplicator Computers & Internet

1 Answer

Source drive not ready


This means that you have selected a drive such as a CD/DVD drive or another drive that is either nothing in it or is not accessible. The source being what you are copying to the DVD burner.

Dec 05, 2013 | MicroBoards QD DVD 123 Burner

2 Answers

Problem burning CDs with LG burner.


try going to device manager and updating the drivers. if not, contact LG and see how you can get the right drivers cause it just sounds like the PC doesn't know it has a burner

Aug 03, 2009 | Computers & Internet

1 Answer

CD's won't burn right!


Try reinstalling the drivers for your CD bay.

Either the CD that came with the bay, or find them online ....

Right-Clickie your My Computer and find the name of your CD Bay in the list on the Hardware page ... delete it, or right-clickie and uninstall the driver.

Reboot the computer and it should re-detect the drive, or find the drivers you copied earlier.

If that doesn't solve the problem, then it might be the type of CDs that you are using. Have you changed brands lately??

Jun 12, 2009 | QPS Que! CD-Rewriter CD-RW Burner

1 Answer

Hi : I have a HP Pavillion a1218n (P4) computer that is about three years old. I would like to burn data to 8.5 GB Dual Layer - Single sided DVD storage media disks. My CD/DVD burner : burns, flip, burn...


Greetings,
Your dvd drive is not capable of burning a dual layer disc. You need to have a burner that is capable of sending the laser through to the second layer of the disc. That said you can get a DL burner for around 30 dollars. Click HERE to see one from Newegg.com.
I am not sure what you mean by 'burns, flip, burn dvds.' but if you make another comment I will respond.
Take Care,
-WN

Aug 30, 2008 | HP Computers & Internet

1 Answer

Telex spinwise


I suggest you remove & reinstall any drivers... and Yes you will be able to install a DVD in the free bays and "Burn" DVD's...

Sep 10, 2007 | LG (gce-8525bb) CD-RW Burner

Not finding what you are looking for?
MicroBoards QD DVD 123 Burner Logo

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top MicroBoards Computers & Internet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Rick Moore
Rick Moore

Level 2 Expert

66 Answers

 Grubhead
Grubhead

Level 3 Expert

5190 Answers

Are you a MicroBoards Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...