WHAT WELD CAN USE FOR A CHEVY 350 WHERE STARTER GOES

It doesn't really matter, as long as your starter is matched to your flex plate.

http://typeonscreen.info/resource/photos/starter-wiring-diagram-chevy-350-chevy-starter-wiring-diagram-download-electrical-wiring-diagram-40-104612.gif

no, its not a drop in fit. rice car with usa engine.
but anything can fit, of you have tools and the skills
measure, cut , weld., and cash to buy adapter kits.
engine mist fit more than mounts
it must fit to the transmission.
why not join a real forum on Isusu, we dont have a custom cars section here, "no organization all here, more blog like here , and useless:
one of the many, ever google "isuzu forum'" hark a revelation.
http://www.planetisuzoo.com/

lots more, and many have swap sections, really Ive never seen a real forum not have swaps section, but where you are now.

Dead short in wiring or you are connecting the battery the wrong way round. Negative goes to earth and positive goes to starter.

not sure what you mean . there is one bolted to block other end to frame thats the ground .the power possitve on the battery goes to the solinoid on top of starter. sorry spelling .

most starters are the same on chevy 350s should bolt right up, if you have to change torque converter, but most chevy 350 flywheels are universal. that's the good thing about a chevy most everything 350 smallblock bolts right up. hope this helps

You need to replace the starter solenoid.

the battery wire goes driectly on the large post of the starter along with all the wires that have fuse links on them the smaller wire goes on the small bolt on the starter..

The positive cable from the battery goes to the starter, the negative cable goes to either the frame or the block

how do you remave a starter from a chevy s-10