Question about Heating & Cooling

Open Question

Rinnai reh-19d-p won't stay lit - Heating & Cooling

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: heater goes off with the

Probably the oxygen sensor faulty or lack of ventilation - this is a safety device to prevent carbon monoxide posioning - needs expert attention!

Posted on Jan 17, 2009

  • 252 Answers

SOURCE: need an igniter

My local Ace Hardeware carries many ignitors - otherwise a Rinnai dealer will have one.

Posted on Apr 26, 2009

Therinnaiguy
  • 1420 Answers

SOURCE: I need an installation manual for a Rinnai

go to rinnai.us and look under Library.

Posted on Dec 13, 2009

SOURCE: Pilot light will not stay lite?

For some reason it seems the safety protection is activated? Perhaps a faulty thermocouple? Usually that anyway. Or electronics have failed.

Posted on Jan 27, 2010

  • 30 Answers

SOURCE: converting Rinnai REH-25-N to LP

Typically, an unvented heater or gas log cannot be converted, mostly for safety reasons and it is usually cost prohibitive. Some newer heaters come with both Natural Gas and Propane components and have to be set up one way or the either.
It would be better to sell your old heater and get one with the proper gas type.

Posted on Mar 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pilot lite will not stay on when I release the igniter pressure knob REH-18-N wall heater!


IS there gas? YES ok. So if you can get the pilot lit, but when you let up on the button it goes out. Few things to check. On some heaters the manf. install a safety switch to drop the pilot out if its not venting or if its over heating.

Jan 01, 2017 | Heating & Cooling

2 Answers

The heater will shut down after about ten seconds.


Graham there are a couple of things that could be causing what you described.

The Oxygen Depletion Sensor (ODS) which is part of the pilot assembly could be clogged with dust, lint or pet hair. When this happens, the ODS reads the oxygen level as unsafe for operation. Using canned compressed air with a straw nozzle (like you clean your computer with) to blow out the ODS and the pilot tip should solve the problem.

Also, if the air louvers of the cabinet of the heater may also be clogged. Keeping them clean is important.

The Thermocouple, which keeps the pilot lit, may have failed. In which case it will need to replaced.

I hope this helps you to further troubleshoot & solve the problem. Thanks for choosing FixYa.

Sep 09, 2011 | Rinnai RHFE-1004FA 38,400 BTU Energy Saver...

1 Answer

Need pilot light assembly for Rinnai gas heater model #REH-25-P


Unfortunately, Rinnai only sells repair parts through their authorized dealers. Contact the dealer you purchased it from. If you are not the original owner of the home/heater, you can go to Rinnai's website and search for a dealer near you. http://www.rinnai.us/direct-vent-wall-furnaces/

Feb 28, 2011 | Rinnai RHFE-1004FA 38,400 BTU Energy Saver...

1 Answer

Father-in-law has a Rinnai REH-20D-N model and needs two parts: CP-80037-31 and REH19D-20. Where can I get parts?????


Rinnai, the manufacturer can help you. Go to http://www.rinnai.us/ for more info and contact information.

Jan 21, 2011 | Heating & Cooling

1 Answer

The pilot doesn't stay on. the flame doesn't extend out as far as it normally does. The model number is Reh-30dt-p.


The pilot light will extinguish when you turn the valve to on for main burner... cause is a bad thermocouppler. it's yhe bulb the poilot light heats up.

Oct 09, 2009 | Rinnai Unvented Gas Zone Heater. 99% fuel...

1 Answer

Need an igniter


My local Ace Hardeware carries many ignitors - otherwise a Rinnai dealer will have one.

Apr 21, 2009 | Rinnai Vent Free Gas Heater/

1 Answer

Heater goes off with the pilotlight had it for 3 years work great rinnai glo-ray reh-23dft-n


Probably the oxygen sensor faulty or lack of ventilation - this is a safety device to prevent carbon monoxide posioning - needs expert attention!

Jan 17, 2009 | Rinnai Vent Free Gas Heater/: 6,000 BTU...

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

paulcarew

Level 3 Expert

2463 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...