Question about Tecumseh Snowblower Snow Blower Starter Handle (Tecumseh)

1 Answer

Yardworks snowblower problem engine no starting

I have changed spark plug, fresh petrol, cleaned carburator, but engine not starting with electric starter

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Check out the interlock switch system, check battery with a load meter first to make sure battery is up to snuff

Posted on Nov 27, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My troy-bilt snowblower will not start. I stored it right last winter. I filled it with fresh oil & gas two days ago. I've done the starting procedure over and over again. Added fuel stabilizer and seefoam...


Check to see you are getting spark at the spark plug. Take the plug out and put the plug wire on it and ground the the nut on the spark plug to the engine block and crank the engine and see if you get spark at the plug. If so then your carburetor has to be taken apart and cleaned.

Jan 28, 2015 | Garden

2 Answers

Unable to start the snowblower pre-blizzard...


Air intake is at the carburator, try to spray fluid in the air cleaner. If it still doesn't start, pull the spark plug wire off or pull the spark plug out and hold it a 1/4 inch or so from the engine head and pull the cord to see if your getting spark. If not then the magneto gap will need to be reset, or the voltage regulator may be bad..

Jan 26, 2015 | Electric Garden

1 Answer

Clarke 2200kw generator will not start Have changed spark plug checked flters put in fresh petrol


are you getting spark , is the on switch on , some people forget to do this

Jan 19, 2015 | Electrical Supplies

1 Answer

Why does yardworks 173cc bs engine will start, run, for 2-3 seconds then stop


Bad gas. Drain gas and refill with fresh gas with Stabil. Old oil. Drain oil fill with fresh 30w oil, 16-18oz. Clean air filter and spark plug.. Relpace air filter if dirty. Saving $$$ on this simple tune up is not intelligent.

May 11, 2014 | Yard Man YardMan 11A41K3001 21Inch 173cc...

1 Answer

Yardworks snow blower


Leaks are normally from bad seals or ones put on engine wrong. Many snow blowers leak oil, very common. Electric start needs to be taken apart. Rust is problem most likely. When you engage the starter it kicks out the gear to turn over engine. Carefully remove the starter from engine, try to start starter an if the pinion gear does not kick out from starter disassembly it an try to clean rust away from action. Dont break wires around electric motor careful about getting dirt an rust in winding. Try to lube spring an moving parts around gear. One other thing it could be a sheared off gear on starter also.

Mar 22, 2014 | Tecumseh Garden

1 Answer

My yardworks snowblower engine not running


need more information, several reasons why an engine won't run

Nov 24, 2013 | Tecumseh Snowblower Snow Blower Starter...

1 Answer

Craftsman snowblower will not kick over


Old gas? Did you pull out the spark plug and see if you have a spark? If the gas is old, drain the tank and line to the carburator, then put in fresh gas. Never put it up for the summer with gas in it. Run it until the engines runs out of fuel, then put it away.

If there's no spark, then you have a coil issue.

Nov 21, 2013 | Craftsman Snow Blower / Snowblower Bottom...

1 Answer

How to start the snowblower yard machine when you've tried everything to start it up correctly and it doesn't start?


How did you store it? The gas should be drained out of the carburator and tank prior to storing. If you don't do that it starts varnishing the jets closed in the carburator. So to start it, try draining all the old gas out. Take the spark plug out and put the wire back on and lay it on top of the block. Crank the engine over turn switch on if it has one, does it have spark? If it does good. If not try a new plug, if it still does not have spark you will have to pull the flywheel to see what is wrong with the points or pickup. Once you have spark established, put new fuel in tank. Spray a little WD40 into spark plug hole. Put spark plug back in and go through normal starting procedures. Good luck.

Jan 06, 2012 | Sewing Machines

1 Answer

AH520 Tecumseh engine will not start; no spark to plug. Checked for spark to plug; no spark Cleaned fuel line from tank to carb. Used fresh fuel. Snowblower has not been used for about 15 years.


I would recommend a serious carburetor cleaning or even installing a new rebuild kit after the machine setting up for so long. The spark problem must be checked for either the (magneto to flywheel air gap) or the condition of the electrical points and condensor on it (if this older model has them)

Sep 19, 2010 | Husqvarna Garden

1 Answer

Mastercraft snowblower will not start


if old gas was left in the tank and not flushed it makes the carb stick and won't allow the proper gas flow to the motor...I would first test the plug by verifying it has spark..if it does what i do at times is quickly spray some quick start in the plug chamber and reinsert the plug and try to restart...this at times will get the spark going and allow the motor to start.....you can also try to spary some in the carb before starting...just a squirt or two....the best thing to do is actually clean out the carb as it is likely the issue.....hope this helps

Dec 18, 2008 | Mastercraft Garden

Not finding what you are looking for?
Tecumseh Snowblower Snow Blower Starter Handle (Tecumseh) Logo

375 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tecumseh Garden Experts

Mike Squire

Level 2 Expert

391 Answers

itsman

Level 2 Expert

89 Answers

Rick Oudette
Rick Oudette

Level 1 Expert

25 Answers

Are you a Tecumseh Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...