Question about Kenmore Elite HE4 Electric Dryer

1 Answer

Front load washer leaking on the floor

Had my washer since 2009, take great care of it, never had a problem. Today after 1 load, water started leaking on the floor. Cleaned the drain pump filter, there was no build up. Connections at the back not leaking. What could be the issue?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,198 Answers

Check the bellows gasket real carefully for a hole, and make sure the door gasket is good and no problems with how it fits to the front of the machine.
Pull the machine out, and watch it from all angles with any covers off that can be removed without interfering with function. Run a quick rinse and see what leaks.

Posted on Nov 24, 2013

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 246 Answers

SOURCE: my washer drain pipe is overflowing on my floor

Sounds like your drain pipe is restricted or clogged. Try using a "Pipe Snake" to unclog.

Posted on Jul 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Spins slow, does not drain and leaks a little.


SOUNDS LIKE MIGHT BE SEAL LEAKING WILL NEED TO DO BEIRINGS AND SEALS

Jun 17, 2012 | Maytag LAT2300 Top Load Washer

1 Answer

I see water down on the floor after the wash load is completed. Initially when washer starts, there is water on the ground.


Your observation of the leak is very important to confirm the point of leak. Check for leak from the door gasket on the front door, check for drain pump/valve leak, check for drain hose leak from a faulty clip.

Jan 22, 2011 | Frigidaire ATF6000ES Front Load Washer

1 Answer

My Kenmore 800 series washer leaks from under the front left during the spin cycle. I looked behind it and checked the connections but all seems fine in that area. What could be causing this?


Same problem! Flooded the laundry room and about 1/4 of the basement. Happens randomly, not every load. Checked all hoses, they are snug and don't appear to be leaking at all. During the wash cycle it you can hear it spraying water inside the washer and the floor starts flooding. I bought the washer Sept. 19, 2009 and have had this problem for about 5 weeks now. Sears refuses to do anything about it, because it's no longer under warranty.

Aug 07, 2010 | Kenmore Washing Machines

1 Answer

Intermittent water on floor


Check the inlet valve hoses, even if inlet is at the back, the water may drip down and flow on the front part on the machine. There you also have the PUMP, a faulty pump may leak intermittently.
Here you get all diagrams and parts for your appliance.

Sep 25, 2009 | GE WJSR2070B Top Load Washer

1 Answer

About 1 minute into the cycle water starts running out from underneath of the washer. Checked all the hoses that are connected to the back and none are leaking


this is either the front seal that goes from the outer tub to the front of the washer or a hole in the outer tub itself or one of the hoses underneath the seal and the hoses are easiest to check you can take a cup of water and slowly pour it into the front seal. take care not to overfill it to where it spills into the tub and see if you are getting water on your floor from that. the hoses tip the washer up onto its back and look at them from the bottom for any cracking etc. the tub itself can only rust out on some of the neptune models or on others is plastic and can get punctured. just have to look for damage with a light and a mirror.

May 19, 2009 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Water Leaking on floor.


probably the water dispenser valve.

Apr 13, 2009 | Maytag Neptune MAH5500B Front Load Washer

2 Answers

Considering the purchase of Samsung WF338 / DV338 Washer & Dryer


beware of front load washers on second floor! vibration will be more likely to be a problem. because of the floor the only real place a frontload can be at its best is on a floor that has a concrete slab foundation because if the floor can move, flex or creek your washer will vibrate and will shake your house. also beware of putting the cabinets under washer they can cause it to vibrate even on a slab floor because the cabinet will flex and move. Also make sure you check your pockets really well all the time!!!!!!! drain pumps and service calls are expensive it is worth the time. and only HE soap the washer uses 1/3rd the amount of water as a top load so you cannot use the same amount of soap or you will get suds build up in your washer and it will cause it to leak and cause error codes that will cost you a service call. And leave your door open when your not using your washer because It will start to stink even more so if you use the wrong soap.

Mar 05, 2009 | Samsung WF337AA Front Load Washer

1 Answer

Washer Shaking Violently on Spin Cycle


Yes, there is...The legs on the washer are adjustable, the rear legs are often ( not always ) self adjusting, make sure the legs are not stuck and that they can move freely. But the front legs can screw in and out to move the washer depending on the floor the washer is sitting on. Make sure the washer is as low to the floor as possible. When the legs are screwed out too far the washer becomes wobbly. Often on the metal style legs there are lock nuts that can be tightened to secure the legs so they don't move on you. washers where really meant to sit on a cement floor, if your washer is on a wooden floor look carefully at the strength of the floor. If the floor is moving up and down when the washer is running, the floor may not be strong enough to support the washers weight. Most main floor laundry rooms floors are nailed down, the sub-floor is more secure if the sub-floor has been screwed down. Sometimes extra support may have to be added under the flooring to add some strength for leaking issues Check the easy stuff first, fill hoses tight?- drain hose cracked?
Failing those checks, cut a piece of cardboard slightly smaller than the size of your washer. Slip the cardboard under the washer and run a short load. Look carefully at the water mark on the cardboard. The mark on the cardboard the water leak will leave, will help you tell from which side or front to back the leak is common from. This will help point you in the correct direction to look for the trouble maker.

Nov 24, 2008 | Maytag PAV2300 Top Load Washer

2 Answers

Water Leak


Yes all you have to do is take off the front cover of the washer or the back cover, it it usually the front on top load washers. I believe your water pump may be cracked, but am not sure. What you need to do is remove the cover and start your washer and let it fill. Get a flashlight and pay close attention to where the water is leaking from. Then all you have to do is replace the part and your done. Any part dealing with water leaking will not be hard to change.

Sep 23, 2008 | Maytag MAV6200 Top Load Washer

2 Answers

Kenmore front load washer


check teh rubber seal on teh front door. They sometimes leak down the front of the door.

Jan 14, 2008 | Kenmore 44832 Front Load Washer

Not finding what you are looking for?
Kenmore Elite HE4 Electric Dryer Logo

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3072 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...