Question about Black & Decker Black Decker 16" Hedge Trimmer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I use a dremel with a sharpening stone, if u don't have one you can also use a power drill with a small sanding disk (1 inch) and course sand paper (30 or 40 grit). or you can use a bastard file. its too tight to use any kind of angle guide so just take your time and do it by eye. it shouldn't take much to get them sharp enough to do the job, over-sharpening is unnecessary and dangerous, and will make the blades dull faster. sharpen all the free blades, top and bottom, then start the trimmers to advance the blades to free up the sides you couldn't get. i use a light penetrating oil to clean the blades first, then lithium grease spray to lubricate.
Posted on Nov 28, 2008
Do you use WD40 on the blades between sessions
If you have been cutting resinious branches there is more than a chance that the blades are seized together.
You could try putting the blades into a bucket of very hot soapy water (Without a power line attached or the battery removed )
Leave them to soak for a couple of hours, take them out of the water and give them a try, if they run then dry the blades off with a hair dryer and apply some oil to the surfaces.
If they donT then you have stripped the teeth on the gearbox and you may as well dump them as it will be cheaper to buy a new machine than it is to get B&D to repair it
Posted on Jun 16, 2009
id check the electric motor first, was it whining when it was going? like maby the brushes in the motor are worn out. if so u can maby get replacements
Posted on Mar 25, 2011
Tips for a great answer:
Jan 13, 2016 | Food Processors
Jun 14, 2014 | Black and Decker USA Black & Decker V2...
Nov 07, 2012 | Black & Decker 12-Cup Programmable...
May 19, 2012 | Garden
Apr 22, 2012 | Garden
Jun 30, 2011 | Black & Decker FP1300 Quick N Easy Food...
May 26, 2011 | Garden
Jun 24, 2010 | Black & Decker HS2000 Flavor Scenter 7-Cup...
Jun 16, 2009 | Black & Decker Black Decker 16" Hedge...
36 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: