Question about Sony LAMP BLOCK XL2100U Projector Lamp
Looking for two sets of projector LCD devices for the Christie L6 Projector. Sony Part numbers LCX039ALT6 LCX039ALT7 LCX039ALT8 anyone know a source for these???
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here is a list of error codes for your unit:
12 Software bug. Contact dealer/factory.
13 Flash memory corrupted. Download new software.
14 Engineering only programming is complete. Call Christie, replace TIPM.
15 Attempting to download code without being in boot mode
16 Invalid interrupt. Power off/on. If it persists, contact dealer/factory.
17 Forced boot mode. Keys held down too long.
18 Attempting to program boot mode without jumper
21 Lamp compartment too hot
25 Lamp 1 not installed
26 Lamp 1 Interlock: door open, lamp not installed
27 Unable to turn lamp 1 ON
28 Lamp 1 shut off unexpectedly
29 Lamp 1 driver overheated
2A Lamp 1 driver operation error (e.g. too hot can’t start)
2C Lamp 1 driver UART communications failure
30 Lamp 2 not installed
31 Lamp 2 door open
32 Unable to turn lamp 2 ON (unknown reason)
33 Lamp 2 shut off unexpectedly
34 Lamp 2 driver overheated
35 Lamp 2 driver reports operation error (e.g. too hot can’t start)
36 Lamp 2 driver UART communications failure
37 Lamp Watchdog Tripped – Unless lamps turn on again after 3 minutes, assume software hung.
Posted on Feb 26, 2009
After replacing lamp, connect projector AC power cord and turn the projector in standby mode.
Press following keys on control panel for less then 5 seconds each..
RESET, <==, ==>, ENTER.
That will reset lamp timer in projector.
Posted on Jun 01, 2009
I had the same problem on my 3M projector, i found that the problem lay with the cable.
My case was solved by turning the cable around i.e the end which was in the computer is now connected to the projector.
Try the above or try a new cable.
I hope this works
Posted on Jul 30, 2009
Tips for a great answer:
Aug 13, 2014 | Christie (03-000457-06P) Projector Lamp...
Mar 09, 2014 | Christie LX32 Lamp
Mar 06, 2014 | Christie DS+60 Multimedia Projector
Feb 18, 2014 | Christie LHD700 OEM Projector Lamp
Jan 31, 2014 | Christie LX120 Lamp
Jan 11, 2014 | Christie DS 6K OEM Projector Lamp
Jan 05, 2014 | Christie Projector Replacement Lamp -...
Nov 01, 2013 | Christie Office Equipment & Supplies
Sep 23, 2009 | Christie Office Equipment & Supplies
Dec 10, 2007 | Christie Office Equipment & Supplies
51 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: