Question about Heating & Cooling
We bought a new gas cylinder but the gas still doesn't seem to come through. Is there a way of testing the gas release from the bottle?
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Pilot light seems to high
there may be an adjustment screw for pilot height. you'll have to look at the valve. a pilot should have an inner cone of greenish blue color and the surrounding flame should be a deep blue no yellow or orange tips. the pilot burns pure fuel no air. the main valve does mix air with the gas in order to burn.
Posted on Nov 04, 2007
SOURCE: Three bar fire keeps going out
Look at the burners and see if there are any cracks or irregularities. Also the flames should be nice and blue in color, if not, then some new burners may be in your future.
Posted on Jan 09, 2008
SOURCE: yellow pilot on heater
posted on May 06, 2008
Rating: 90%, 19 votes
All it needs is a good blow out with compressed air. They tend to carbon up in the pilot light area. You will probably also find it is very dusty inside. Easiest way to clean the carbon out is to remove the hose at the heater and with compressed air blow through the fitting where you have removed the hose. Make sure you hold down the start button so the air can get through to the pilot light and jets. Don't connect the electricity for the fan when you do this. If you can get to the top of the pilot light it may help to give that a blow out too.
To clean it out internally you only need to remove the front panelling. Just follow the screw configurations *** you go. I asm not familiar with that type of heater so thats about the best I can do. Regards Bryan
Posted on May 07, 2008
We had a problem keeping the pilot light to stay on, and this site recommended that it could possibly be the thermocoupler that was causing our problems also. We ordered the thermocouple, put it on,hooked it back up and it worked great! Thank you so much.
ordered thermocouple from www.masterparts.net
Posted on Feb 24, 2009
SOURCE: Torpedo heater wont stay lit.
Do you have the serial number or the manufacture date? There are some design changes and I would need to know the year of manufacture to assist accurately. Usually it is a relay or the thermocouple connection that will affect the unit staying lit.
Posted on Mar 29, 2009
Tips for a great answer:
Oct 30, 2016 | DeLonghi Heating & Cooling
Jan 24, 2015 | DeLonghi Heating & Cooling
Feb 02, 2012 | DeLonghi Heating & Cooling
Mar 13, 2010 | Logitech S520 Mouse
Mar 09, 2010 | 2009 Ford Focus
Feb 08, 2010 | Canon PIXMA MP210 Photo All-In-One Printer
Dec 03, 2008 | DeLonghi Heating & Cooling
Apr 06, 2007 | Reddy Heater RLP100 Portable Forced Air...
97 people viewed this question
Usually answered in minutes!