Question about Office Equipment & Supplies

1 Answer

Brother DCP-J41100DW Ink absorber full message Showing

I have the error message Ink Absorber full on my new brother printer. I have emptied the absorber but the message stil i Havel shows. How do I reset? seen the other solutions for other brother models but none of them apply to this model as there are no physical buttons to press only touch screen. Please can someone help as brother refuse to!!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,198 Answers

Troubleshooting
75
B
Machine Information
B
Checking the serial number
B
You can see the machine's serial number on
the Touchscreen.
a
Press (
Settings
).
b
Press
s
or
t
on the Touchpanel to
display
Machine Info
.
c
Press
Machine Info
.
d
Press
Serial No
.
e
Press .
Reset functions
B
The following reset functions are available:
1
Network
You can reset the print server back to its
default factory settings, such as the
password and IP address information.
2
All Settings
You can restore all settings to their factory
defaults.
Brother strongly recommends performing
this procedure before handing over or
disposing of the machine.
NOTE
Unplug the interface cable before you
choose
Network
or
All Settings
.
How to reset the machine
B
a
Press (
Settings
).
b
Press
s
or
t
on the Touchpanel to
display
Initial Setup
.
c
Press
Initial Setup
.
d
Press
s
or
t
to display
Reset
.
e
Press
Reset
.
f
Press
Network
or
All Settings
.
g
Press
Yes
to confirm.
h
Press
Yes
for 2 seconds

Posted on Nov 24, 2013

Testimonial: "Thank you for your attempt but I have been through all the processes in the manual including this. The reset for the ink absorber is a hidden menu and sequence. The reset for other models is widely available on the internet but not for this model. Many Thanks."

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: IP1880 Canon PIXMA showing Ink absorber full

Pixma ip 1880 is full(solution)

1. first unplug power cable and usb cable
2. hold power for 1-2 minutes
3. turn on power
4. your printer should back to normal printing


Posted on Mar 21, 2009

  • 1 Answer

SOURCE: ink waste absorber

Waste absorber is full. Where is the waste ink absorber and how do I empty it?

Posted on Apr 09, 2009

naresh_sh695
  • 1 Answer

SOURCE: The ink absorber near full Problem with my brother

DCP j125 Inkjet printer stopped printing showing msg. ink absorber is full. What to do?

Posted on May 07, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What to do if it always appear in the monitor of the printer that ink absorber is near full?


Not only the absorber must be cleaned, also the counter must be reset. I know there is a program for older Epson printers to reset the counter. I found a reset procedure for a brother printer here:
How to Reset Purge Counter on Brother DCP J315W Printer
Perhaps you can fine one for yours?

Feb 21, 2015 | Brother DCP-J125

1 Answer

Hi, i am from India and have a Brother DCP-165C Printer. Now i am facing problem with my Brother DCP-165C Printer. It is showing " Machine Error 46" What is this problem & how can i get a solution. ...


Machine Error 46 indicates that the ink absorber pad is full and needs replacing. You will need an engineer to replace this.
If your machine is out of warranty, please contact Brother Customer Service:

7777 North Brother Blvd.
Bartlett, Tennessee 38133
1-877-BROTHER (877-276-8437)
901-379-1215 (fax)
M-F, 9:00am to 8:00pm Eastern Time

Jan 19, 2014 | Brother DCP-330C All-In-One InkJet Printer

3 Answers

How to reset brother DCP-J125 Ink Absorber Full


DCP j125 Inkjet printer stopped printing showing msg. ink absorber is full. What to do

Nov 26, 2012 | Brother DCPJ125 All-In-One Inkjet Printer

3 Answers

INK ABSORBER PROBLEM


Brother Printer Dcp-j125 Ink Obsorber Full

Jun 26, 2012 | Brother DCPJ125 All-In-One Inkjet Printer

8 Answers

The ink absorber near full Problem with my brother dcp j125 printer


DCP j125 Inkjet printer stopped printing showing msg. ink absorber is full. What to do?

Aug 10, 2011 | Brother DCPJ125 All-In-One Inkjet Printer

3 Answers

DCP j125 Inkjet printer stopped printing showing msg. ink absorber is full. What to do?


well, cut the small piece of black tape (or you can use black permanent marker) and then cover the sensor of the cartridge, once the device will ask you to reinstall the cartridge and new system will detect as a new cartridge

ronnymails_2.jpg

Mar 30, 2011 | Brother DCP117 All-In-One InkJet Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...