Question about Janome L-344 Mechanical Sewing Machine

Open Question

My janome 344 limited edition keeps snapping threads

The top thread keeps snapping

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 240 Answers

SOURCE: top thread breaking during sewing.

Your top tension may be too tight or it could be incorrectly threaded. Check threading and ensure you are using a good quality thread. Cheap threads breaks without a reason!

Posted on Jun 11, 2009

Ad
  • 8 Answers

SOURCE: Top thread keeps breaking on my Janome 1600P.

I had a similar problem and then realized that the thread on the top had a **** on the spool it was catching on.

Posted on Sep 24, 2009

  • 1116 Answers

SOURCE: AM in need of a janome 344 manual - cannot figure

http://www.sewingmachinesplus.com/manual-j-344-enfr.php

Posted on Feb 28, 2010

hazelgrace
  • 340 Answers

SOURCE: How do i thread a

Hi
I couldn't find a manual on the Janome site for the machine you have but I did find this one for a similar looking machine. It should be enough to get your started on how to thread your machine and what the different parts are for.
http://www.janome.com/documents/File/ManualFile/Sewist509.pdf

Posted on Sep 04, 2010

  • 1788 Answers

SOURCE: how to thread a janome l-344

Go to sewingmachinesplus.com and download a manual for $10. It will be well worth it because it will give you all of the troubleshooting tips etc and you will have a back up with the advantage of being able to enlarge diagrams for detail. Good luck.

Posted on Sep 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to thread machine


Download your manual from Janome

Jul 30, 2014 | Janome L-344 Mechanical Sewing Machine

2 Answers

I have a brother vx-1125 the cotton keeps snapping..but the tension is correct..please advise..


The needle thread breaks
1. the needle thread is not threaded properly
2. The needle thread tension is to tight
3. The needle is bent or blunt
4. The needle is incorrectly inserted
5. The needle thread & the bobbin thread are not set under the presser foot when starting to sew
6. the threads were not drawn to the rear after sewing
7. The thread is either to heavy or to fine for the needle

Aug 17, 2012 | Janome Sewing Machines

1 Answer

Threading a Janome L-344


try sewusa.com they have some threading diagrams
you can email them about a manual also

Jul 31, 2012 | Janome Sewing Machines

1 Answer

Threading Janome 344 sewing machine.


try sewusa.com they have a threading diagrams for sewing machines

Nov 21, 2010 | Janome L-344 Mechanical Sewing Machine

1 Answer

How do i thread a janome sewing machine model 344?


Hi
I couldn't find a manual on the Janome site for the machine you have but I did find this one for a similar looking machine. It should be enough to get your started on how to thread your machine and what the different parts are for.
http://www.janome.com/documents/File/ManualFile/Sewist509.pdf

Sep 04, 2010 | Janome L-344 Mechanical Sewing Machine

2 Answers

Bobbin thread tension issues


There might be a piece of thread or lint caught in the bobbin tension preventing it from functioning correctly.

Feb 24, 2010 | Janome L-344 Mechanical Sewing Machine

2 Answers

Top thread keeps breaking on my Janome 1600P.


I had a similar problem and then realized that the thread on the top had a **** on the spool it was catching on.

Sep 23, 2009 | Janome 1600P-DB Mechanical Sewing Machine

1 Answer

Top seam normal but bottom one appears just straight and loose.


If the top thread looks normal and the bottom thread "loops", it means that the top thread does not have tension. Take out all the thread and re-thread the path, giving special attention to the path of the thread through the tension disks.
Thread the machine with the sewing foot up, it opens up the tension disks, and make sure you lower the foot before sewing.
This will close the tension disks.

Jun 22, 2009 | Janome L-344 Mechanical Sewing Machine

2 Answers

Top thread breaking during sewing.


your needle needs to be replaced and make sure it is in correctly..if this does not work you will need to make sure your thread is not old. then adjust you bobbin tension...there are 2 tensions on machine top and bobbin

May 22, 2009 | Janome Memory Craft 9000 Computerized...

Not finding what you are looking for?
Janome L-344 Mechanical Sewing Machine Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1129 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

184 Answers

Eva Hack

Level 1 Expert

25 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...