Can't turn my aluratek Libre e-book reader PRO on

the ereader thinks there real books.

Hi!

Heres the link where you can download the instruction manual, you just select the Model form the Drop down:

http://aluratek.com/cms/legacy/support-library.php

eBookBoy
http://digialreader.freeforums.org

Hi,

You can download and print the instruction manual in PDF format by clicking this link.

http://aluratek.com/media/uploads/AEBK07FS_Manual.pdf

Adobe PDF Reader is required to view this manual. Download Adobe Reader

Hope this helps. Kindly let me know if you have any difficulty in downloading the manual.
Thanks for using FixYa.

Go to the Aluratek site: http://aluratek.com/products/ebook-readers and select your model.

There is a link to the manual just before the Overview section. The direct link for the Libre Pro is http://aluratek.com/media/uploads/AEBK01FS-AEBK01WFS_Manual.pdf (for the model that comes without the SD card).

I hope this helps.

Cindy Wells

The specs for your unit states that a 2 GB. SD card is included in your purchase. Also, you can buy up to a 32 GB. SD card or High Capacity SD card for it.
See the specs on the bottom of this link:

http://www.buy.com/prod/aluratek-libre-ebook-reader-pro-black-sd-card-slot-up-to-32gb-mp3/q/loc/111/211986385.html

Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!

Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

how to transfer ebook from computer to sd card and then to another computer

I had the exact same problem and what Aluratec told me to do is you have to reload the books from your Adobe Digital Editions on your computer and reinstall them on your libre Pro e-reader. I haven't done it yet as I am at work and have to wait until I get home. Hope this works.

shwqoift

Unfortunately Aluratek did copy hardware from Ectaco and did not software. It does not have license to support Cyrillic fonts, so can not support Russian, sorry
.