Question about Electronics - Others

Open Question

Takamine CT4-DX preamp - Electronics - Others

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1212 Answers

SOURCE: How do I remove the electronics (pre-amp) from my Takamine G350 for trouble-shooting?

The process if covered right here:
http://www.takamineguitars.eu/uk/support/preamp-removal-and-installation/

IMHO- the guitar manufacturers are the top of the line when it comes to customer service and online support data.

Posted on Apr 02, 2012

Ad
  • 6 Answers

SOURCE: Hi! My TP-4T preamp on

Hello,I am a guitar tech in Nanaimo,BC,Canada and have run into this problem before.Simply replace the Takamine output jack [where the guitar cord goes into] 3 screws and solder,and it will work fine again.The jack has a switching mechanism in it and when it fails it shorts the output out.The jack is available at most Takamine dealers or Allparts http://www.allparts.com/SearchResults.asp?searching=Y&sort=7&search=jack&show=20&page=5

Posted on May 04, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Takamine TP4T Preamp blinking


It does sound to be fried but, you really don't have to replace it with the same exact model, look for an upgrade, I'm sure that manufacture and many others have one better. If it were my guitar, I would definitely think of it as upgrade time. The pickup is probably ok knowing that it can handle heat better due to its location and materials.

Mar 09, 2014 | Takamine 1 NEW Takamine EG350SC G-Series...

1 Answer

How do I remove the electronics (pre-amp) from my Takamine G350 for trouble-shooting?


The process if covered right here:
http://www.takamineguitars.eu/uk/support/preamp-removal-and-installation/

IMHO- the guitar manufacturers are the top of the line when it comes to customer service and online support data.

Apr 01, 2012 | Music

2 Answers

Hi i recently bought a Takamine EG 260c G Series acoustic electric Guitar with TP-4T preamp installed in it. Now the problem is when i connect my guitar to an amplifier, the sound comes through it only...


That is working backwards from what it should be. I suspect a wiring error. Since this is a recent purchase, do NOT risk voiding your warranty. There isn't any real good documentation on the tuner.
I am not sure which tuner you have HOWEVER with one type, the FIRST press will turn on the tuner with the sound going out as well till the tuner goes off. The SECOND press silences the sound and is tuner only, the THIRD press turns off tuner and passes the sound. This is different than a lot of tuners and you will need to do three presses to restore sound instead of the usual two.

May 02, 2011 | Takamine 1 NEW Takamine EG350SC G-Series...

2 Answers

Hi! My TP-4T preamp on my Takamine EG124C works only when tuner is ON. After tuner automaticallt turnes off, the sound stops. Please help!


Hello,I am a guitar tech in Nanaimo,BC,Canada and have run into this problem before.Simply replace the Takamine output jack [where the guitar cord goes into] 3 screws and solder,and it will work fine again.The jack has a switching mechanism in it and when it fails it shorts the output out.The jack is available at most Takamine dealers or Allparts http://www.allparts.com/SearchResults.asp?searching=Y&sort=7&search=jack&show=20&page=5

Mar 06, 2011 | Takamine 1 NEW Takamine EG350SC G-Series...

5 Answers

Hi! My TP-4T preamp works (sound present on AMP) while tuner ON only. After tuner automatic turn-off, sound stoped as well - some noice only. Can I repair such problem myself (I have an experience in...


Hello,I am a guitar tech in Nanaimo,BC,Canada and have run into this problem before.Simply replace the Takamine output jack [where the guitar cord goes into] 3 screws and solder,and it will work fine again.The jack has a switching mechanism in it and when it fails it shorts the output out.The jack is available at most Takamine dealers or Allparts http://www.allparts.com/SearchResults.asp?searching=Y&sort=7&search=jack&show=20&page=5

Feb 03, 2011 | Takamine 1 NEW Takamine EG350SC G-Series...

1 Answer

When i plug the guitar into the amp, i turn the preamp on, and it allows me to play for about 90 seconds and then cuts out and no sound comes out of the amp until i turn the preamp back on.. what do i do?


If the preamp is in the guitar, the battery is likely dead. When a dead battery "rests" for a short while it recovers a bit and may operate for a short time and shut down.

Jan 10, 2011 | Takamine EG361SC Acoustic-Electric Guitar

Not finding what you are looking for?
Electronics - Others Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electronics - Others Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

kakima

Level 3 Expert

102366 Answers

Brad Brown

Level 3 Expert

16415 Answers

Are you an Electronics - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...