Question about Fisher and Paykel DG05 Gas Dryer
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
dryer's have a long belt that runs around the drum. a common culprit is an idler pulley on the belt tensioner. you can take off the front of the dryer and oil it for a temp fix. it will probably need to be replaced
Posted on Dec 16, 2008
my Fisher Paykel auto sensor dryer keeps stopping and beeping, i have to stop it and and re start.
I had the same problem. I took it off the wall and vacuumed up all the lint from everywhere including around the back and including taking off the back and vacuuming everything I could reach inside. I then used a damp cloth to get rid of the rest of the lint/dust.
I thought I was wasting my time but guess what, the problem has gone.
Posted on Nov 08, 2009
SOURCE: Fisher & Paykel ED56 not working
Replace (repair) the exhaust sensor this looks like a transistor with the middle leg cut off. it is situated below the lint filter but can only accessed by removing the back panel, top panel (or rear screws to allow the removal of the drum). drum and then front panel to remove the connector from the mainboard. If you follow the exhaust tube once the back is off you will see a single phillips head screw that is the sensor. check the wires to the circuit board are not broken or dry joints or just replace it. sorry i had a spare machine i scavenged from to fix my problem so i dont know where to buy new.
Posted on Apr 09, 2010
It could be bearing or guide in the drum.Go to http://fisherpaykelparts.net/techhelp/fisher-paykel-top-load-dryers-us-models/ This forum will work you through your problem
Posted on Oct 15, 2010
SOURCE: I want to replace the
Now you need to get your hands on the replacement part for your dryer, you will need to find an authorized F&P servicer to sell you the part (part #479332 btw) or call Fisher & Paykel directly to get the part from them.
OK below at bottom, is a user manual, below, is an exploded parts manual, this should help
Above is a place to get the bearing kit.
Posted on May 06, 2011
Tips for a great answer:
Oct 17, 2014 | Fisher Paykel Fisher & Paykel Traditional...
May 05, 2014 | Fisher Paykel Fisher & Paykel SmartLoad...
Nov 12, 2012 | Fisher and Paykel DGGX1 Electric Dryer
Nov 25, 2010 | Fisher and Paykel DEGX1 Electric Dryer
Oct 07, 2010 | Fisher and Paykel DEGX1 Electric Dryer
Oct 05, 2010 | Fisher and Paykel DEGX1 Electric Dryer
Aug 31, 2010 | Fisher and Paykel DEGX1 Electric Dryer
Sep 30, 2009 | Fisher and Paykel DEGX1 Electric Dryer
Aug 11, 2009 | Fisher DEIX2 Dryer
Mar 05, 2009 | Fisher and Paykel DEGX1 Electric Dryer
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: