Question about Hoover U6476-900 WindTunnel Vacuum
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
May have to replace the cord reel asm. It will have to be taken out and inspected, if can't see a problem, then replace it. If this is less then one year old, then it is still under warranty and should be taken to a warranty shop along with proof of purchase.
Posted on Jan 15, 2008
SOURCE: Changing the belt
I'm not familiar with that model, as it is fairly new to the market, but the previous models had a plastic plate that covered the roller. There are two clips that must be depressed as you gently pull the plate away from the machine. This will allow the removal of the plate so that the roller can be removed and a new belt installed. This is a new model, so you must have the manual still. You can also check www.hoover.com for more instructions and last time I checked, they had a manual download feature available.
Posted on Jan 27, 2008
i had the same issue, but with a little time and a screwdriver, i got my vacuum working like new.
First, remove the bottom cover where the brush is located. Once the cover is off you'll see the vacuum inlet hose just behind the brush. Clear out any debris you find in there.
Second, on the back of the unit, where the attachment hose connects to the vacuum remove the three screws and clean out any debris you see in there. (dont be afraid to get your hands dirty)
hope this helps!
Country Music Guy
Posted on Apr 19, 2009
I had the same problem - the power cord for my Hoover Elite Upright (U5507900) was stuck a few inches out and wouldn't go any further. But when I unscrewed the rewinding mechanism, the cord had clearly gotten twisted and partly buried under itself so after some work I was able to free it. Now it seems to be working fine, at least for the moment. Note that I had to use small screwdrivers to unscrew the cord rewinding compartment, like the kind of screwdrivers you use for computer repair.
Posted on Jun 22, 2009
most likely band is broken. Usually there is a spare in the box or on the unit when new. Unscrew 2-3 screws by beater bar (brushes) pull off cover and replace band.
Posted on Jul 09, 2009
Tips for a great answer:
Oct 04, 2015 | Hoover Vacuums
Jan 08, 2010 | Hoover Elite Rewind Bagless Upright...
Aug 27, 2009 | Hoover U5507900 Elite Rewind Bagless...
Jul 09, 2009 | Hoover U5507900 Elite Rewind Bagless...
May 27, 2009 | Hoover Elite Rewind Bagless Upright...
May 14, 2008 | Hoover Vacuums
Dec 31, 2007 | Hoover U5507900 Elite Rewind Bagless...
Apr 16, 2011 | Hoover U6476-900 WindTunnel Vacuum
62 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: