Question about Heating & Cooling

Open Question

Comfort star air conditioner e1 code - Heating & Cooling

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

marked
  • 6487 Answers

SOURCE: The error code E1 is

E1 is refering to the air filter. If turning the unit off and unplugging doesn't reset it then you probably have a PC board or sensor failure. None of these units can actually detect a dirty air filter. All it does is set a timer that turns the E1 on after what the manufacture determines is average.
Hope that helps.........

Posted on Jul 28, 2008

bobicehouse
  • 1524 Answers

SOURCE: we have an E1 code

Display Codes:

E1-Automatic filter clean reminder.

Turn the air conditioner OFF and unplug it. NOTE: The air conditioner must be unplugged for the automatic filter clean timer to reset.

Clean the filter. See the Care and Cleaning section in your use&care manual. After cleaning, replace the filter and plug the air conditioner back in.

Posted on Jul 22, 2011

  • 4736 Answers

SOURCE: how do I reset my energy star air

Turn the ON/OFF switch to OFF and unplug the unit for 15 minutes. Then plug the uni back in and turn it ON. During that 15 minute timeout, the unit should have reset itself and reverted back to the original factory settings. If it did, you can set the controls as you desire.

Hope this helped you and thanks for choosing FixYa.

Posted on Jul 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Comfort Control Center 2. Why is E-1 error displayed?


[PDF]Customer assistance for air filters cleaning (E1 code)

www.sharpusa.com/.../air_man_AFS100FX_S120FX_S125F...
Sharp SolarCustomer assistance for air filters cleaning (E1 code) on Sharp Air Conditioners. The display will indicate an E1 code and not allow the unit to operate until the ...

Sep 08, 2015 | Dometic Rooftop RV Air Conditioner

1 Answer

How to fix Comfort-aire e1 code


most of the 'e' codes point to the room sensor or pipe sensor being defective.

Sep 03, 2014 | Comfort-Aire Heating & Cooling

1 Answer

Haier service manual


This is what you error code means.
E1 = Room temperature sensor fault
Haier Air Conditioner Fault Codes


AC Repair Tamarac

Aug 25, 2014 | Haier Esax3186 Energy Star 17,000 Btu...

1 Answer

My mini split comfort star has an e1 error code, what does it mean


the E1 code is a communication error.First check for proper voltage at your condenser, then check all wire terminations between condenser and air handler. you should have LED's on your main board as well as your PFC board. if they show normal operation then chances are the main board is bad. be sure to check the ground .it must have a proper earth ground.

Jan 18, 2014 | ComfortStar Heating & Cooling

1 Answer

Turning off code e1 flashing what is e1 code


E1-Automatic filter clean reminder.

Turn the air conditioner OFF and unplug it. NOTE: The air conditioner must be unplugged for the automatic filter clean timer to reset.

Clean the filter. See the Care and Cleaning section in your use&care manual. After cleaning, replace the filter and plug the air conditioner back in.

Jul 28, 2011 | Sharp Comfort Touch AF-R120EX Air...

1 Answer

How do I reset my energy star air conditioner? sharp energy star comfort touch air conditioner is flashing E1


Turn the ON/OFF switch to OFF and unplug the unit for 15 minutes. Then plug the uni back in and turn it ON. During that 15 minute timeout, the unit should have reset itself and reverted back to the original factory settings. If it did, you can set the controls as you desire.

Hope this helped you and thanks for choosing FixYa.

Jul 25, 2011 | Sharp Heating & Cooling

1 Answer

We have an E1 code on our Sharp energy star model AF-S100FX air conditioner and the unit will shut off. What does the E1 code mean?


Display Codes:

E1-Automatic filter clean reminder.

Turn the air conditioner OFF and unplug it. NOTE: The air conditioner must be unplugged for the automatic filter clean timer to reset.

Clean the filter. See the Care and Cleaning section in your use&care manual. After cleaning, replace the filter and plug the air conditioner back in.

Jul 22, 2011 | Sharp AF-S100FX Comfort Touch Air...

1 Answer

I have a Haier 5,200 btu air conditioner that


E-1. Indoor room temp sensor defective. replace it.

Jul 23, 2010 | Haier Energy Star ESA3183 Air Conditioner

2 Answers

The error code E1 is lit on the front panel of room air conditioner. The instuction book is lost and I can't locate the model number. It says energy star and comfort touch and come with an remote...


E1 is refering to the air filter. If turning the unit off and unplugging doesn't reset it then you probably have a PC board or sensor failure. None of these units can actually detect a dirty air filter. All it does is set a timer that turns the E1 on after what the manufacture determines is average.
Hope that helps.........

Jul 28, 2008 | Sharp Heating & Cooling

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

413 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

paulcarew

Level 3 Expert

2460 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...