Question about Canon PIXMA MP150 All-In-One InkJet Printer

2 Answers

PIXMA MP150 => it says E-2-3... Please HELP!!

I have problem with my MP150. The thing is that when I'm pushing POWER button, it starts to make routine movements and sounds, at least they seems to be routine as every time when I was starting it. But the display shows E => 2 => 3 in sequence. Ain't have any idea what's going on. I also tried Canon troublestooting but it turns out that I have to contact with servise and it won't tell me what's wrong with it. Please help..

Posted by on

  • 4 more comments 
  • Anonymous Dec 28, 2007

    I have just had my cartridges refilled, they are still coming up as empty. Now there is an error code 1 then 6 flashing. I have tried all the usual, huge backlog of printing to be done. £16 wasted?

  • Anonymous Jan 11, 2008

    I ALSO JUST HAD MY INK REFILLED BUT NOW I AM GETTING A HEAD ALGINMENT PROBLEM. HOW CAN I FIX THIS?

  • Anonymous Apr 21, 2008

    mine says E 3 - how do i solve that????

  • Anonymous Apr 21, 2008

    Basicly the same except, we changed the ink cartridges, and all we get is E5 ....Cannot figure out what E5 means and how to correct..Please advise. Thank You ..Roger

  • ali salah Apr 30, 2008

    NoMatterWho's PIXMA MP150 => it says E-2-3... Please HELP!! problem, and notify you when a new solution is offered.

  • Anonymous Mar 16, 2009

    e40 is it cant fix anymore?need send to canon?

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 74 Answers

E23 is a paper feed error. Check the rollers and the paper feed mechanism. Following are the various error codes for your printer: CANNON Printers MP150/MP160 ERROR CODE E9 The connected digital camera / video camera does not support Camera Direct Printing E14 The Ink cartridges whose destination are wrong E15 Ink cartridge is not installed E16 - Ink remaining is unknown E16 -E19 Failed to scan head alignment sheet E22 Carriage error E23 Paper feed error E24 Purge unit error E25 ASF(cam) sensor error E26 Internal temperature rise error E27 Waste ink absorber full or platen waste ink absorber full E28 Ink cartridge temperature rise error - E29 EEPROM error E33 Paper feed position error E35 15 USB Host VBUD overcurrent error - USB E37 17 Abnormal motor driver error E40 20 Other hardware error E42 22 Scanner error

Posted on Oct 09, 2007

Ad

I am also getting an E5 error although it was working fine before and i have changed nothing.

Posted on May 01, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Refilled cartridges


the pixma range need to have the chips reset or refilled before they become empty.

Put in a genuine cartridge and it should work. Buy a set of cartridges with dummy chips that allow the printer to use refilled cartridges.

Please rate my help++++Thanks for using FIXYA

Jun 03, 2010 | Canon PIXMA MP180 All-In-One InkJet...

1 Answer

Problem with refill in for my Canon Pixma MP-180


Hi there
You can try to reset the cartages this may do it Please call back let us know if it worked for you, PLEASE.


Power off printer
Hold down STOP/RESET button then Press and Hold down Power button
Keep Power button down and Release STOP/RESET button
Release power button
Push STOP/RESET button twice
Wait 20-30 seconds - our LED showed Idle
Push STOP/RESET button four times
Push Power button twice
Power off
Next time the printer is started the waste count will have been reset.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Feb 06, 2010 | Canon PIXMA MP180 All-In-One InkJet...

1 Answer

My canon Pixma IP1500 start blinking 10 times alternationg orange and green, then repeats. I even reset waste ink counter, but no luck. Please help me out. Thanks.


How To Reset Waste Ink Canon Pixma MP450

Hi there
You can try to reset the cartages this may do it Please call back let us know if it worked for you, PLEASE.


Power off printer
Hold down STOP/RESET button then Press and Hold down Power button
Keep Power button down and Release STOP/RESET button
Release power button
Push STOP/RESET button twice
Wait 20-30 seconds - our LED showed Idle
Push STOP/RESET button four times
Push Power button twice
Power off
Next time the printer is started the waste count will have been reset.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Jan 29, 2010 | Canon PIXMA iP1500 InkJet Photo Printer

1 Answer

Le réservoir d'encre est plein, comment le nettoyer ?


How To Reset Waste Ink Canon Pixma MP450

Hi there
You can try to reset the cartages this may do it Please call back let us know if it worked for you, PLEASE.


Power off printer
Hold down STOP/RESET button then Press and Hold down Power button
Keep Power button down and Release STOP/RESET button
Release power button
Push STOP/RESET button twice
Wait 20-30 seconds - our LED showed Idle
Push STOP/RESET button four times
Push Power button twice
Power off
Next time the printer is started the waste count will have been reset.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Jan 06, 2010 | Canon Pixma MP450 All-In-One InkJet...

1 Answer

After replacing ther waste ink absorber, canon pixma IP 2000 printer does not print at all. Cannot do a deep cleaning, or cleaning at all. Do I need to reset the codes? The nozzles behind the cartridges...


How To Reset Waste Ink Canon Pixma MP450
OK try see if this will do
Hi there
You can try to reset the cartages this may do it Please call back let us know if it worked for you, PLEASE.


Power off printer
Hold down STOP/RESET button then Press and Hold down Power button
Keep Power button down and Release STOP/RESET button
Release power button
Push STOP/RESET button twice
Wait 20-30 seconds - our LED showed Idle
Push STOP/RESET button four times
Push Power button twice
Power off
Next time the printer is started the waste count will have been reset.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Jan 01, 2010 | Canon PIXMA iP2000 InkJet Printer

2 Answers

Reset waste pad canon IP 4500 printer


How To Reset Waste Ink Canon Pixma MP450

Hi there
You can try to reset the cartages this may do it Please call back let us know if it worked for you, PLEASE.


Power off printer
Hold down STOP/RESET button then Press and Hold down Power button
Keep Power button down and Release STOP/RESET button
Release power button
Push STOP/RESET button twice
Wait 20-30 seconds - our LED showed Idle
Push STOP/RESET button four times
Push Power button twice
Power off
Next time the printer is started the waste count will have been reset.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Dec 20, 2009 | Canon Pixma iP4500 InkJet Printer

1 Answer

Waste ink counter reset for canon pixma mp190 all in one


Hi there
You can try to reset the cartages this may do it Please call back let us know if it worked for you, PLEASE.


Power off printer
Hold down STOP/RESET button then Press and Hold down Power button
Keep Power button down and Release STOP/RESET button
Release power button
Push STOP/RESET button twice
Wait 20-30 seconds - our LED showed Idle
Push STOP/RESET button four times
Push Power button twice
Power off
Next time the printer is started the waste count will have been reset.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Dec 04, 2009 | Canon PIXMA MP190 All-In-One InkJet...

1 Answer

How to Clean the Canon Pixma MP450 Printer Waste Ink Absorber


How To Reset Waste Ink Canon Pixma MP450

Hi there
You can try to reset the cartages this may do it Please call back let us know if it worked for you, PLEASE.


Power off printer
Hold down STOP/RESET button then Press and Hold down Power button
Keep Power button down and Release STOP/RESET button
Release power button
Push STOP/RESET button twice
Wait 20-30 seconds - our LED showed Idle
Push STOP/RESET button four times
Push Power button twice
Power off
Next time the printer is started the waste count will have been reset.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Nov 18, 2009 | Canon Pixma MP450 All-In-One InkJet...

1 Answer

I have a canon pixma mp450 printer that shows an error code of 6000 that will not clear itself no matter what I do. How do I fix this problem and what is it?


It may be

How To Reset Waste Ink Canon Pixma MP450

Hi there
You can try to reset the cartages this may do it Please call back let us know if it worked for you, PLEASE.


Power off printer
Hold down STOP/RESET button then Press and Hold down Power button
Keep Power button down and Release STOP/RESET button
Release power button
Push STOP/RESET button twice
Wait 20-30 seconds - our LED showed Idle
Push STOP/RESET button four times
Push Power button twice
Power off
Next time the printer is started the waste count will have been reset.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Nov 02, 2009 | Canon Pixma MP450 All-In-One InkJet...

1 Answer

CANON PIXMA MP450. ALARM LIGHT WON'T GO OFF - WHAT IS WRONG PLEASE.


Hello there please try this
You can try to reset the cartages this may do it Please call back let us know if it worked for you, PLEASE.


Power off printer
Hold down STOP/RESET button then Press and Hold down Power button
Keep Power button down and Release STOP/RESET button
Release power button
Push STOP/RESET button twice
Wait 20-30 seconds - our LED showed Idle
Push STOP/RESET button four times
Push Power button twice
Power off
Next time the printer is started the waste count will have been reset.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Jun 02, 2009 | Canon Pixma MP450 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA MP150 All-In-One InkJet Printer Logo

2,528 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2147 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...