Question about Fellowes Saturn 2 A3 Laminator Laminators
If the motor is running, then the cog that drives the roller system may have failed. Laminators built today are made with plastic (nylon) roller drive cogwheels that crack. Especially if the fed media is too thick. Put the machine into run mode and feed a single piece of card (a playing card will do) into the feed slot. Lightly hold the card and see if you can feel the card moving. To check if the motor is in reverse, feed the card into the output slot.
If you are handy with a screwdriver, then with it disconnected, remove the lid (about six screws underneath) and check the rollers for old lamination sheets that could be stuck to one of them. This would limit the feed gap between the rollers, preventing you from putting your media in.
Posted on Nov 26, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jun 08, 2010 | Fellowes Office Equipment & Supplies
Nov 20, 2009 | Fellowes Powershred DM8C (Confetti)...
Aug 16, 2009 | Fellowes DM8C Cross-Cut Shredder
Jan 08, 2008 | Winsource Tech Solutions TS-4500 Cross-Cut...
705 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: