Question about Stanley Air Tools & Compressors
If you get no pressure but the motor is running, there is a good possibility that a pin has separated from the piston fly wheel. This is very easy to fix. Unscrew all the screws on the bottom (including the eight smaller screws that hold the battery terminals) and lift up the cover. Look at the compressor (start with the air pressure valve and work to the compressor) and locate where the piston is. It is located at the side of the unit. The connecting rod will be noticeable loose (use your finger to locate the looseness if you need to) and once finding it Just connect it to the compressor. There will probably be a link within the case that has come loose and because it is not connected, the air from the compressor is not being carried to the hose. Just put in the link and presto - it should be fix.
Posted on Nov 24, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 12, 2015 | 450 Amp Battery Jump-Starter
Jun 24, 2011 | Stanley Black & Decker Stanley J5c09 500...
Jan 20, 2011 | Stanley Black & Decker Stanley J5c09 500...
Dec 05, 2010 | Black & Decker Jump Start System 450 Amp...
Feb 22, 2009 | Black & Decker Jump Start System 300 Amp...
511 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: