Question about Element Televison & Video

1 Answer

Customersupport I can't get it to work. I lights up and goes through the sequence asked for but stops on auto scan. All i want is to use it to watch Tc in my bedroom. same channels as in my living room. We use Dish Sat.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 59 Answers

The first question is, how do you connect the Dish Sat to the TV?
If by coax cable, then let the TV scan and find the output channel of the receiver (ie. Channel 3). If you are using HDMI or other Input Input ports, you should be able to skip the auto scan and just choose the corrent input port. If all else fails, hook an antenna or coax cable to the TV and allow Auto Scan to complete its processes. You should then be back normal and can then select the input port.

Posted on Nov 22, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: Cnannel scan detects no channels

Kingscott,
Make sure the cable connection from the dish to the tv is
connected to the antenna/cable input and not the digital
input. Turn on the satellite receiver then auto program the
set with the receiver still on. If this fails to lock in channel
3 your suspicion regarding a faulty tuner could be correct.
A good way to check the tuner operation would be to hook
up another product such as a VCR with the rear switch set
for channel 3 and see if you can receive a picture from this
device. If it works the tuner is OK.
You can bypass the tuner by connecting an S-Video cable
and (or) a set of A/V (yellow,red & white) cables from the
output of the satellite receiver to the video 1 input on the tv.
You'll then have to switch the tv source mode to video 1.
Hope this of some help,
Caseybee

Posted on Mar 20, 2008

emissionwiz
  • 76848 Answers

SOURCE: How do i manually add a digital channel to my tv? model: ILO-26HD

do u have the user manual for the TV? if you do the solution will be in there, if not (I suspect you don't) please give the make an model so I can try to look this up, but off the top of head there is no way to "assign channels" to a paticular remote setting.

Posted on Jul 28, 2009

  • 2976 Answers

SOURCE: new tv. won't work

Press the input button and select where you have the satellite plugged in.

Posted on Aug 12, 2009

  • 2 Answers

SOURCE: Dynex 32" 720 LCD HDTV - no channel listing after run auto scan?

Excuse me but the other answers are written by people who have not actually confronted the problem and are just guessing. They are all wrong. Here's the answer:

If your TV is expecting a TV input, it will keep searching for at least one TV channel on cable or antenna. If you only have a DVD player plugged in, for example, or if your cable is hooked up wrong, so there's no video signal on it, the TV will keep searching forever. (This is an unforgivable design flaw, by the way. But then, it was a cheap TV, wasn't it?)

To solve the problem, look at your remote control. You will find input buttons. Mine are small, along the top, right under the "power" button. Try pressing "video" for example, instead of TV. That stops the TV from hunting for TV channels.

Have a merry Christmas. Enjoy your new TV. Watch it in moderation and eat fruit and vegetables every day.

Posted on Dec 25, 2009

  • 1 Answer

SOURCE: Incomplete Auto Scan of the channels

I ran the Auto Scan. Before the scan reached 91%, I pressed the Menu button on my remote and all of the channels that it found locked in.

Posted on Jan 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My window goes back down to half way when i wind up with the auto fuction


what kind of vehicle? Usually when that happens either the window glass it rubbing against the stops or stabilizers and the window thinks there is something in the way and is stopping. Sometimes the auto function is out of sequence. Try pushing the up button and holding it for a few seconds and then auto it down. That might solve the sequence problem.

Dec 10, 2014 | Cars & Trucks

1 Answer

Code 13


2004 Jeep? grand Cherokee?
why 2 digits?, where did you see that? very odd that.
are you posting to year 2004 in error?
do post car brand model, GC.
and post year, post engine option (size)

beg,barrow, rent or get loaned (many stores loan it) or ask you mech.
to scan the PCM. (watch out for poor shops with ratty tools)

any scan tool that has JEEP factory code support works best.
one of the best is INNOVA 3160

or drive to any auto repair shop. and ask them to scan car
many will do it for free, as good faith and easy way to get work.

jeeps 1996 to 2000 any scan tool works
93-95 year needs a special OBD1 jeep scan tool , $150?
old that 1993 , only very expensive dealer type tools work. DRB1 or 2.

the operators guide in the glove box, says what to do .
did you lose that?

Apr 01, 2014 | 2004 Jeep Grand Cherokee

1 Answer

My husband bought a watch at Walmart - MDC74567W A126 - he threw out the information and it had no names attached that we could find. The alarm goes off every day and we cannot figure out how to turn


Take it to the Walmart store and ask the associate ate the counter to explain to you how to turn off the alarm. Or ask to see the manual.

Feb 16, 2014 | Watches

1 Answer

The check engine light goes on for a while then go out and the airbag light is on


Thanks for choosing FixYa and welcome. There are many things that can cause your check engine light to come on. When it does come on, this means the computer has detected a problem with the vehicle. Every car has this system. Anytime it is on, you can usually get a code number off the computer scan. The hookup is under the dash in most cars. You can buy a cheap one for around 50 dollars at most auto part stores. If you do buy one, you may need to find what each code means. If you don't own one or you can't get to one, you can take it to Autozone or Advanced Auto Parts to get your vehicle scanned. Most places do not charge for the scan. Autozone and Advanced Auto Parts do not charge when your check engine light is on. They will be able to scan it for you and give you the codes. They will let you know what it says and what parts you will need as well. if you ask. If your check engine light is flashing, this means there may be internal engine failure. If this is your case, get it scanned as soon as possible. The longer you go with the light on, the greater the chance you have to make the problem worse. Some of the newer vehicles has this system already built in. You will need to know sequence though, to make the code appear

Apr 21, 2011 | 2005 Jeep Grand Cherokee

1 Answer

Engine check light and dashboard lights don't come on


Thanks for choosing FixYa and welcome. There are many things that can cause your check engine light to come on. When it does come on, this means the computer has detected a problem with the vehicle. Every car has this system. Anytime it is on, you can usually get a code number off the computer scan. The hookup is under the dash in most cars. You can buy a cheap one for around 50 dollars at most auto part stores. If you do buy one, you may need to find what each code means. If you don't own one or you can't get to one, you can take it to Autozone or Advanced Auto Parts to get your vehicle scanned. Most places do not charge for the scan. Autozone and Advanced Auto Parts do not charge when your check engine light is on. They will be able to scan it for you and give you the codes. They will let you know what it says and what parts you will need as well. if you ask. If your check engine light is flashing, this means there may be internal engine failure. If this is your case, get it scanned as soon as possible. The longer you go with the light on, the greater the chance you have to make the problem worse. Some of the newer vehicles has this system already built in. You will need to know sequence though, to make the code appear.

Apr 06, 2011 | 1997 Honda Accord

1 Answer

My check engine light, ABS and brake lights are on.


Thanks for choosing FixYa and welcome. There are many things that can cause your check engine light to come on. When it does come on, this means the computer has detected a problem with the vehicle. Every car has this system. Anytime it is on, you can usually get a code number off the computer scan. The hookup is under the dash in most cars. You can buy a cheap one for around 50 dollars at most auto part stores. If you do buy one, you may need to find what each code means. If you don't own one or you can't get to one, you can take it to Autozone or Advanced Auto Parts to get your vehicle scanned. Most places do not charge for the scan. Autozone and Advanced Auto Parts do not charge when your check engine light is on. They will be able to scan it for you and give you the codes. They will let you know what it says and what parts you will need as well. if you ask. If your check engine light is flashing, this means there may be internal engine failure. If this is your case, get it scanned as soon as possible. The longer you go with the light on, the greater the chance you have to make the problem worse. Some of the newer vehicles has this system already built in. You will need to know sequence though, to make the code appear

Mar 05, 2011 | 1999 Volkswagen Passat

1 Answer

I need to do a channel scan on my tv to get the service working but i cannot find channel scan options on the menu. Where is the channel scan option on the sharp LC-32SB24?


During power up and first time use, there should have been an option for channel scanning as the initial setup wizard began.

ec12f55.jpg

Alternatively, there should be a way to navigate to the channel scanning menu by selecting, Menu>TV>Auto Channel Search. I couldn't get the exact info from the model you listed, but I gathered this info from a similar owner's manual (lc-32sb28ut) from the Sharp webpage: http://www.sharpusa.com/CustomerSupport/ProductDownloads.aspx

Hope this helps.

Oct 17, 2010 | Sharp LC-32SB24U 32 in. LCD TV

4 Answers

Check engine light


What is the code, you need to have a scanner hooked up to read it. That is your first step. (Some auto parts stores will read these for free, but will not give you a lot of information.)

May 31, 2010 | 1999 Mazda Protege

2 Answers

CHECK ENGINE LIGHT


there are over 200 system faults that turn the check engine light on, have the systems computer tested, there should be a trouble code present to ID the fault(s)

Sep 28, 2009 | 2004 Saturn VUE

3 Answers

Cannot remove progressive scan mode


press stop and keep hold of the stop button while you eject the dvd, it worked for me, i played around with it and found pressing stop and holding it while ejecting works

Sep 30, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Element Televison & Video Experts

Cindy Wells

Level 3 Expert

5189 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

74482 Answers

Are you an Element Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...