Question about Lexmark X656de AllInOne Laser Printer
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
OK, a couple of things... Some earlier Lexmark units had code on both a RIP board (raster image
processor) and an engine board. In this case, the code would have to be reloaded into both
boards. Fortunately, this can be done even if the printer will not boot to a ready state. However, if
this has already been done sucessfuly, the problem may well not be the printer but rather something
in the data stream. To confirm this, remove any and all data cables and reboot the printer. If it comes ready and you can print all the internal pages including the network config pages, then it is likely the
problem is the data stream. One must be careful when the printer is controlled by a print server
because the end user may not have control over the print que. If a corrupt or printer incomprehensible
job is stuck in the que, the printer will go to a 900 condition as soon as the network interface
initializes. This will continue until the print que is cleared.
Hope this helps...
Posted on May 01, 2009
Tips for a great answer:
Mar 16, 2012 | Lexmark Interpret S405 Wireless All-in-One...
Mar 10, 2012 | Lexmark Interpret S405 Wireless All-in-One...
Feb 12, 2012 | Lexmark Office Equipment & Supplies
Jan 27, 2012 | Lexmark X Office Equipment & Supplies
Dec 31, 2011 | Lexmark X Office Equipment & Supplies
Dec 11, 2011 | Lexmark X5650 All-in-One InkJet Printer
May 27, 2011 | Lexmark X204n 4-in-1 Laser Printer
Mar 10, 2010 | Lexmark X204n 4-in-1 Laser Printer
Jan 21, 2010 | Lexmark X204n 4-in-1 Laser Printer
261 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: