Question about Indesit W 123 Front Load Washer

1 Answer

Indesit wg1130t front loader washing machine

There was some banging during spin cycle, then spin cycle became intermitant, sometimes decreasing the load helped. then spin cycle ceased to work, now washing cycle has ceased to work as well.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 64 Answers
Re: indesit wg1130t front loader washing machine

Maybe the drive belt is off/broken. Take the back off to check

Posted on Oct 31, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Kenmore 43142 front loader bangs during spin cycle any ideas on what the problem might be?

always check the load to the drum is not to heavy on one side, this could cause it to bang.

Aug 25, 2012 | Kenmore Washing Machines

1 Answer

Whirlpool Duet Washer Model WFW9400SZ00 bangs only during spin cycle.

Yes you are exactly right, these bearings have failed & are causing the noise very common problem with whirlpool front loaders. very expensive to repair worth while looking into replacing instead of repairing as it will just happen again.The new LG machines are the best in my opinion.

Feb 06, 2012 | Whirlpool duet Washing Machines

1 Answer

My front loader washing machine is make a banging sound during spin cycle

When my washer did that, I found that the shocks that hold the tub were bad...

Check out this tip I wrote about the noise and vibration that front loadwashers can make..

Washer Problems Washer noise when spinning

Apr 16, 2011 | Kenmore Washing Machines

1 Answer

Banging noise during spin cycle

weight not distabuted in washer move cloths around so its even

Feb 10, 2010 | Washing Machines

1 Answer

Banging noise on spin cycle

most front loaders are balanced by a large: ready for this: cement block inside at the top of your machine and because spin is so fast it can sometimes hit inside your machine or it has brokin a peice off ,sorry but yours going to have to get the repair person out.adrian

Feb 15, 2009 | Bosch Classixx WFL 2066 Front Load Washer

1 Answer

Indesit Wg1130T


Oct 25, 2008 | Indesit W 123 Front Load Washer

1 Answer

Three day old Indesit washing machine

Is it a maytag? My maytag front load washing machine had 2 long bolts with plastic braces on them, to keep the drum still during shipping. Mine would bang and shake all over. I got the book out before I finally figured it out. I had to take the back cover off and remove the bolts and plastic braces over them. They look like they' 8 inches long or so. It works great now.


Jul 15, 2008 | Indesit W 123 Front Load Washer

2 Answers

Kenmore 44832200 banging during spin cycle

The support spring beside the spinning hausing are cut replace w/new spring available appliances store. bring sample.

Jan 07, 2008 | Kenmore 44832 Front Load Washer

3 Answers

Irregular banging during cycle

these washers are a swine to dis-assemble and i would not recommend it unless you are experienced. on most indesit, the bearings are in a spider bolted to the outside of the tub. take the back off and see if you can localise the noise to the bearings worthwhile also taking the heater out (one nut in the middle), peer in and check no foreign object causing the noise

May 21, 2007 | Indesit W 123 Front Load Washer

Not finding what you are looking for?
Indesit W 123 Front Load Washer Logo

877 people viewed this question

Ask a Question

Usually answered in minutes!

Top Indesit Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 2 Expert

75 Answers

Are you an Indesit Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides