Question about JVC Digital Video Camera
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
In the case no REEL FG is produced for 4 seconds
or more in the capstan rotation mode after
loading was complete, the mechanism mode
is shifted to STOP with the pinch roller set off.
This error is defined as [E03].
However, no REEL EMG is detected in the
1. The idler gear does not engage with the reel disk well.
2. Though the idler gear and reel disk are engaged with
each other, the tape is not wound because of overload
to the mechanism.
3. No FG pulse is output from the reel sensor.
4. No power is supplied to the reel sensor.
5. Tape transport operation takes place with a cassette
having no tape inside.
6. The tape slackens and no pulse is produced until the
slack is taken up and the tape comes into the normal
Posted on Jan 29, 2008
If the camera becomes damp or cold and brought into a warm atmosphere damp forms in the mechanism which would cause the tape to stick and become damaged or fouled.
leave the camera to warm up for a few hours and the fault should clear.
If not the most common reason is the dew sensor has failed and needs replacing
Posted on May 26, 2008
Tips for a great answer:
Jan 06, 2013 | JVC GR-SXM260E Camcorder
Oct 04, 2012 | Video Cameras
Mar 30, 2011 | JVC GR-D53 Mini DV Digital Camcorder
Mar 29, 2011 | JVC Cybercam GR-DV500US Mini DV Digital...
Feb 04, 2011 | JVC GR-D230 Mini DV Digital Camcorder
Aug 23, 2007 | JVC GR-DVL820U Mini DV Digital Camcorder
30 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: