Question about Fujitsu fi-5120C
WHEN SCAN ERROR CODE SHOWS AS ASC CODE: DS42037 SENSE KEY 0 X 4 ASC 0 X 680 DDES: 0 X 74
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Fujitsu fi 5120c e2 error
See page 25 of:
"E2" is "Trouble with the optical system (front)."
That doesn't solve your problem, but at least it narrow downs the focus of your problem.
Posted on Apr 11, 2009
Mine came with the same error message. If you look through the glass into the left front corner, you should see a spring loaded belt tensioner device. It merely hooks into the bottom plate against a spring to keep the belt tight. On my 5750C, the belt tensioner had slipped out of the base during shipping. The hardest part of inserting it back into the base was getting to it. Directions to do that are on this site at .../support/t484836-taking_apart_flatbed.
Posted on Nov 15, 2011
SOURCE: sense key=0x4,asc=0x48,ddes=0x88
Does your scanner display H0/H8 alarm?
Does the same symptom occur after turning OFF and ON the scanner?
Does any foreign object get inside the Control PCA? Check the control PCA.
Are the cables between Control PCA and the motor damaged? Or are the
connectors connected correctly? Check throughly.
If the issue is not resolved, then you may have to replace the Control PCA as the motor fuse is located in the control PCA unit. For replacement you are recommended to contact Fujitsu scanner expert.
Posted on May 23, 2012
Tips for a great answer:
Aug 29, 2012 | Cars & Trucks
Jan 22, 2012 | Fujitsu fi-6130 Flatbed Scanner
Sep 20, 2011 | Fujitsu fi-5750C Flatbed Scanner
Nov 10, 2017 | Fujitsu fi-5750C Flatbed Scanner
Jun 16, 2011 | Fujitsu fi-5750C Flatbed Scanner
Dec 28, 2009 | Fujitsu fi-5900C Pass-Through Scanner
Dec 05, 2008 | Fujitsu ScanPartner fi-5120C Pass-Through...
Oct 08, 2008 | Fujitsu fi-4120C Path-Through Scanner
266 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: