Question about Sylvania 6432GG 32" TV

Open Question

On my new Insignia 50" tv, the AV input is grayed out (not available as an option).

On my Insignia 50" tv, the AV input is grayed out (not available as an option). I have verizon Fios with a DVR set top box and have that connected to the TV via an HDMI cable (that is hidden within the wall). However I would also like to use my dvd player sometimes but when I switch out of HDMI to try and run the DVD player, the message to run an auto channel scan appears. If I go to the menu, in order to attempt to change the channel on the TV itself vs through the cable box (so my dvd player can connect via a channel) I do not have an option for AV...just HDMI and Channel. How can I get past this? I really do not want to have to manually connect my DVD player to my wall mounted tv using composite or component cables each time. I was able to route the DVD player through the set top box (cable box) with my prior tv. How can I do that with this one?

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: how to run channel auto scan

Okay here's how you do it. Sadly they buried this DEEP in the user guide and I stumbled across it -

Press the TV Menu button then with the < or > arrows scroll to the Channel menu. From there you can select the auto scan.

Posted on Jan 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A dialogue box on the insignia tv screen says no signal. Press input button on remote control. Then select the device you want to view. Be sure device is on.


what the message is telling you is to select the input source to use AV channel selection ( AV 1--AV 2--AV 3 etc )
antenna - dvd player , gaming console etc

Nov 26, 2016 | Insignia Televison & Video

1 Answer

I have a samsung LCD TV. it shows only AV..I can not use it as AV1 AND AV2


You can select its other 2 av inputs by pressing the AV button on its remote control.

Jan 23, 2013 | Samsung P50HP 50 in. LCD TV

1 Answer

Settin TV to AV


Look at your remote for a button called "input options" and press that button while watching your screen to see the various choices available. Everytime you press that button, you should see a change on the screen from one choice of input method to the other. It should says things like "AUX, video 1, video 2, hdmi, AV - ect. Keep pressing that button until you see a picture of find the AV input method you want to keep and that should solve your problem.

Apr 15, 2012 | Sony Televison & Video

2 Answers

INPUT MODE WITHOUT REMOTE


Hi
If you cannot reach the AV input mode by scrolling through the channel up down, nor is there is a source or TV/AV button on the set it self, then the news is bad I am sorry. You will need the remote to get AV inputs on this set.
You can get a new remote for the set from here for $1995. Plus postage. Note that it has the TV/AV button.
Happy to answer any questions you may have.
regards robotek

Apr 13, 2010 | Orion STV2763 27" TV

2 Answers

Can i change the input settings without the remote


pls check from channel one to zero you can see AV input.

Aug 17, 2009 | Insignia IS 20" TV040919 TV

1 Answer

Trying to watch DVD played on portable Insignia player on the TV


If you hear a noise, when triying to read DVD, I am shure I´ts teh engine malfunktion.
you must get the mechanisiam or take this to a service.
I´ts very difficult for lenses to get brocken.

Jul 01, 2009 | Insignia IS-PDVD10 Portable DVD Player

2 Answers

Recorded play back is fuzzy


MOST LIKELY the RF out put signal is the same as a local tv chanel 1) try menue change rf output suggest rf 68! OR connect av leads (red white yellow)from the output of your vcr and connect the other end to an Av input eg AV1 on your TV use tv remote to select the AV input

Apr 21, 2009 | Insignia IS-DVD1001 DVD Recorder/VCR

1 Answer

INSIGNIA TV FLAT PANEL (not LCD) cant play PS3


Check to make sure it is on either the AV 1 or AV 2 channel

Nov 25, 2008 | Televison & Video

1 Answer

Insignia flat panel tv


I don't exactly know your model. I can give you a generic type answer.

I can tell you that when you select to have the full screen, it may not work in the mode for the tuner. The reason is that the programs coming in from your tuner are actualy 4:3. When asking for a full screen you are asking for a 16:9 type format. This would stretch a 4:3 picture.

Have you tried contacting the manufacture, or if you know their local factory support place for your area?


Jerry G.


May 21, 2008 | Insignia 50 in. Flat-Panel Plasma HDTV

1 Answer

Camcorder connect to Insignia dvd/vhs copier unit


connect to front press av input button. set it on av 2. make sure your tv input is set to v2-component.

Dec 24, 2007 | Insignia IS-DVD1001 DVD Recorder/VCR

Not finding what you are looking for?
Sylvania 6432GG 32" TV Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sylvania Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a Sylvania Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...