Question about Lexmark E330 Laser Printer

1 Answer

Toner light won't stop blinking

I replaced my toner not to long ago and there is no way that it needs to be refilled again. A few weeks ago my toner light started blinking and won't stop. I tried shifting the toner in the cartridge around but the light keeps blinking none stop.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An user who is expert in 3 categories / brands.

  • Lexmark Master
  • 1,346 Answers
Re: Toner light won't stop blinking

Try resetting it, open front cover hold down silver button, all lights should flash rotatingly, when stopped turn off and on and close door.

Posted on Oct 11, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I refilled toner of my Lexmark E120 (since it said it was out of toner) and it worked fine untill few days ago when I got status report: Missing or defective catridge. Could this mean it's out of...

Replace the chip, is a chip cartridge problem.

if not work try this:

31 Defective toner cartridge or missing cartridge
1. Verify that the toner cartridge and PC kit are correctly installed.
2.Wait 10-20 seconds for the printer to verify the units.
3. Replace the toner cartridge or PC kit if necessary.

Aug 01, 2011 | Lexmark E120 Laser Printer

1 Answer

I have replaced toner cartridge in HP laserjet 4 si. Now I have toner smears down the left side, about a 32nd inch in.

I don't normally say "call the manufacturer" but if it's a genuine HP cartridge (not another brand, and not refilled) call 1-800-HP-Invent and they'll walk you through a few steps, and if the cartridge is defective they'll send you a new one.
The toners have an out of the box warranty, so if you took the toner out of the box 3 weeks ago, it's still under warranty.

Mar 11, 2011 | Printers & Copiers

1 Answer

I have a Samsung ML-2525 BW laser printer. Recently, the red bar second from the top started flashing and then it went solid. I thought this was because of the ink toner, and the cartridge was running low...

I guess it FixYa didn't accept my (very long, but totally correct) solution that I took the time to type. Because I refused to "sign in".
Here's the short version. Load Paper. The same thing happened to me. I replaced the toner cartridge with a new one (because of a FLASHING red light for several weeks) after the red light went to STEADY red. But it still would not print. The paper was "out". When I'd refilled the paper-tray, it printed fine. I had just ASSUMED that the steady-red light meant toner was finally OUT. WRONG! That steady-red light had nothing-to-do with toner; it meant "you're out-of-paper". Don't get confused like I did. Refill the paper-tray. Then take that expensive NEW toner cartridge OUT, and put the OLD toner cartridge back in. And keep using the "dregs" of the toner out of the old cartridge for several more weeks. And DON'T get confused by the paper-is-out condition making that red light STEADY.

Nov 01, 2010 | Samsung ML 2525 BW laser Printer

1 Answer

Brother 2040 yellow toner light on & won't print. Toner just replaced 8 weeks ago. Printer purchased 6 months ago.

You have a one year warranty with Brother if you need repair. You might shake the toner, or put a small electrical tape over the little round windows on the toner cart. to use the rest of the toner, and press the go button 3 times to print the report that tells you how many prints you've made, you could just be out of toner again...

Feb 03, 2010 | Brother HL-2040 Laser Printer

2 Answers

Yellow light on Toner light on) Cannot print a thing

take out the toner.. at the left side of the toner, there is a level, unscrew the 3 screws and turn the level to the other side, this will reset your toner.
make sure the printer is on when you put back the toner.

Jan 18, 2010 | Xerox DocuPrint 203A Laser Printer

3 Answers

ML-2510 Laser Printer : persistent blinking red light


This problem you will be noticed when toner is 90% empty.
Does the printer is functioning or No. If yes the problem is 90% toner is finished.[10% toner remaining alert]
If printer is not functioning Please change the toner from Genuine dealer. Else your printer fails due to non genuine and refilled toner.

Nov 11, 2009 | Printers & Copiers

1 Answer

Copier won't print after refilling toner cartridge

As far as I know, filling up with toner is not enough. There is an electronic chip that must also be replaced, so the toner cartridge tells the unit it is a new one. Check with your supplier for such chip.

Oct 14, 2008 | Sharp AL 1631 Copier

1 Answer

Toner light blinks and error light shows

1- you either got a bad toner ( the chip on it is telling it it is bad)

happens sometimes with recycled toners.

Return it and tell them it is defective.

The chip needs to be replaced.


Try this but doubt it will work,

open front door hold down go button, all lights will flash in sequence wait for it to stop turn off and on and close door.

Oct 24, 2007 | Lexmark E220 Laser Printer

Not finding what you are looking for?
Lexmark E330 Laser Printer Logo

648 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers


Level 3 Expert

18257 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides