Question about Zanussi W1042W Front Load Washer
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Error E20 means the machine has failed to pump out. 1st check the filter at the bottom right hand side there may still be water inside if so pull the grey tab to the left of the filter there should be a thin hose extend it put it into a shallow dish and pull the cap off to let the water drain this may be a slow process. When the filters out look into the hole with a torch to see if any obstructions in the pump impeller this looks like a cross. If the filters and pump are clear it may be the pump has failed.
Posted on Dec 17, 2008
Locate the filter at the botton front right of washer, behind a drop down cover.
Unscrew anti- clockwise to remove and clean.
If still no go, then you need to check the brushes in the motor.
Hope this helps.
Posted on Dec 31, 2009
Tips for a great answer:
Jun 30, 2017 | Zanussi Washing Machines
May 22, 2016 | Zanussi ZWF12070 Front Load Washer
Mar 05, 2015 | Zanussi ZWN6120L Washing Machine - White
Feb 21, 2015 | Zanussi Washing Machines
Aug 27, 2012 | Zanussi Washing Machines
Mar 22, 2012 | Washing Machines
Jan 16, 2012 | Zanussi Washing Machines
Jun 28, 2011 | Zanussi Washing Machines
Oct 09, 2010 | Zanussi W1042W Front Load Washer
33 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: