Question about iRiver H320 MP3 Player

1 Answer

Formatting After having some problems printing from the unit using a computer in a small copy center, I couldn't get my own laptop to recognize the iriver unit, I have had no trouble with that before. I was able to reset the unit, but it says the disk is full now and I can't get to any files. My laptop does recognize the unit through the media port, but I can't do any thing with it (get to old files, import new ones or record anything) I've tried to reformat from my computer and from within the unit, but it won't let me do that either. Any help would be appreciated!

Posted by on

Ad

1 Answer

eagle338
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points
    Superstar:

    An expert that got 20 achievements.
    All-Star:

    An expert that got 10 achievements.
    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,889 Answers

If it was a bad sector problem, I would think formatting it would isolate the bad sectors and reduce the usable size to then consist of the remaining good sectors.
I wonder if you have an intermittent connection. You could try opening it up and making sure the drive was seated into the connector properly. See the initial steps of Denny's battery change guide to see how to do it.
Click on this link:
http://www.misticriver.net/showpost.php?p=363259&postcount=118
The video link is
http://video.google.com/videoplay?docid=4978926546715798036

Posted on Oct 12, 2007

  • eagle338
    eagle338 Oct 12, 2007

    Let me know if it worked....If it doesn't try a lowlevel for,at i would recommend this toolhttp://hddguru.com/content/en/software/2...

  • eagle338
    eagle338 Oct 12, 2007

    the cut letters in the comment are :"ool/"

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

6ya.com

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Buffalo 1TB mini station HD PCU2 started having some problems after connecting to my new laptop which is having windows8 os. At 1st i couldn't open some folders. It said to format. Did it thrice...
The windows 8 will not recognise the driver for this unit and this is a common problem with win8. Try to get Microsoft download for the correct driver for you machine

Aug 03, 2013 | Computers & Internet

1 Answer

Seagate drive beeping
Wait for it to be recognised and copy off your data before it crashes totally.

Jan 30, 2018 | Seagate FreeAgent Pro - 500GB, 7200 RPM,...

1 Answer

I have a TOSHIBA STOR.E ART 3 ( 1 terabyte ) which is loaded with info from my laptop, then I replaced my laptop with a new laptop and every time I plug in the hard drive firstly i did not recognize the...
Your new laptop is having trouble reading the file system of your drive. the easiest way around this problem is to copy your drive to another drive. then reattach the drive and when it asks to format it say yes. After it has formatted the drive just see if you can use it to save a doc say and then see if it will delete it. If the drive now works ok then copy back all your data onto it and all should be well.
Funny things computers????

Jun 19, 2011 | Computers & Internet

1 Answer

I have 3 PC and a laptop. I have been using Zip 100 disks to save data and move it between them. My oldest, a Win95 machine can be revised as a Win98SE but it will lose all data in the process. Currently...
Hi mattbarrett2 !
Hi , I was in a similar situation a while ago , meaning I needed to back up a Win95 HDD .
I succeeded by taking the drive out of the desktop and connecting it to a win 7 pc . I first tried by putting the drive in a external USB box and connecting it to the Win7 machine . It was a Quantum drive . The pc recognized the drive in the Device Manager but I couldn' access the data in " My Computer " . Then , I connected the Quantum inside my Win7 machine , directly to the IDE port but not using the power plug yet . I booted the computer , waited for Win 7 to be settled and connected the Quantum to the power plug and it worked . I was able to transfer the full content
( 1 GB , ha ha ! ) on a dvdrom and format the Quantum afterwards . I didn't need it anymore but I could have easily placed it back into the Win95 unit and install a new supported OS on it .
Maybe this will help you ?
Best regards ,
fanaudi .

Feb 26, 2011 | Office Equipment & Supplies

1 Answer

I am trying to trasfer a large amount of files from my macbook to a dell laptop. The mac will recognize the drive and i am able to backup and save files onto it, however when i plug the drive into the...
The problem most likely is the Dell does not recognize the MAC file format (HPFS), but the MAC will recognize the PC's FAT 32 file system.
First format the USB mass storage device using the Dell, format this device in FAT 32 not in NTFS because the MAC can read and write/copy PC format files but the Dell/PC cannot read MAC format files.
Then Safely remove this device, connect it to the MAC and copy the files onto this drive. When you connect this device to the Dell, you will be able to see the files.
Have fun.

Aug 13, 2010 | Iomega Computers & Internet

1 Answer

Reinstalled printer after having desktop cleaned
Hello,
Your printer must must be connected to the computer. Does the MFC say Check connection? The Brother software must be installed. It creates a folder called ...\Control Center 3\Scan inside the user's My pictures folder where the scanned pictures are stored. That is what I get when I use the Scan button on my MFC-5460CN. If you use the Control Center you can choose the target storage location as well as the picture format (.pdf, jpg, etc.)

Hope it helps

Aug 30, 2009 | Brother DCP-7020 All-In-One Laser Printer

2 Answers

How to print a regular document from Microsoft Word, Excel.
Instead of pressing the start button to print, you need to press the small ON/OFF button. The start button works to copy/scan. But to print, you will need to turn the printer on first. Once the printer is on, the computer should recognize it fine and allow you to print from your applications.

Jul 13, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

MP450 is not recognized anymore usb problem
https://support.usa.canon.com/kb/index?page=content&id=ART142144

Jun 03, 2017 | Canon Pixma MP450 All-In-One InkJet...

1 Answer

Print too small
There is a copy setting within HP solution center where you can change the copy size. Set it to "Actual Size" or increase the percentage to get bigger prints.

Jun 07, 2008 | HP PSC 1410 All-In-One InkJet Printer

1 Answer

My computer doesn't recognize the Sansa c240
The songs are in the wrong format - convert them to mp3
Read my "Tips and Tricks" on song formats for more detailed info

Mar 31, 2008 | SanDisk Sansa c240 MP3 Player

Not finding what you are looking for?

View Most Popular

H320 MP3 Player

  • Audio Players & Recorders

Related Question

My Buffalo 1TB mini station HD PCU2 started having some problems after connecting to my new laptop which is having windows8 os. At 1st i couldn't open some folders. It said to format. Did it thrice...

  • Computers & Internet

Open Questions:

0 Answers

iRiver h320 is giving a "create error" when i attempt to record. how can i fix it? Thanks.

Nov 25, 2016 | iRiver H320 MP3 Player

0 Answers

Dropped the player, now I have a blank screen I tried to remove the HDD and put it back, same result. Tried to connect to the computer via USB, no change. HDD makes no sound,I can't tell if its dead or the mother board crashed.

Dec 24, 2015 | iRiver H320 MP3 Player

0 Answers

Cannot connect Cannot player to computer to control/use

Mar 09, 2014 | iRiver H320 MP3 Player

0 Answers

H320 USB connect problem When I connect wall charger it shows i'm connected to PC via USB. all functions disabled. will a new battery solve problem.

Feb 12, 2014 | iRiver H320 MP3 Player

See all iRiver H320 MP3 Player Questions

Related Topics

iRiver H320 MP3 Player Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

iRiver H10 MP3 Player

iRiver E100 Digital Media...

iRiver H10 MP3 Player

iRiver iFP-799 MP3 Player

iRiver iFP-899 MP3 Player

Latest Celebrity Headphones Report
Latest Celebrity Headphones Report

View all Fixya Reports

Top iRiver Audio Players & Recorders Experts

Steven Wander
Steven Wander

Level 3 Expert

593 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Mohamed Ismail
Mohamed Ismail

Level 3 Expert

462 Answers

Are you an iRiver Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. H320 MP3 Player Manual

H320 MP3 Player

Loading...