Question about Akai LCT2785TA 27 in. LCD Television

1 Answer

HDMi ( no signal, not supported) doesn't work with Dmr

I am trying to use the HDMI port of my LCT2785TA with a Panasonic DMR-EZ47V. The TV shows no signal, not supported, with 480i or 480p in the top left corner. I have tried the DMR with another TV and the HDMI port works fine. Is this TV HDCP compatible? Is the HDMI port compliant with current specs? Where can I go to find out if these two items are compatible. How can resolve this issue? I have tried 2 DMR's, , 2 different HMDI cables. The first cable has gold connectors , 19 pin , latest technology. The second cable had a bandwidth of 5 gig. I could not find a cable labeled ver. 1.1. I have connected the DMR and HDMI cable to another flat panel TV with no problems. I have contacted Akia tech support not getting anywhere. They have stated that the HDMI port would only work with ver, 1.1 or 1.2 cable. I purchased the low bandwidth cable with no success. Akai now says that the HDMI port will accept the signal because it is coming from an HDCP device. Help Help Help ! Thanks!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have lost my manual for the lct27ta. Have you gone into the menu and setup the hdmi port?

Posted on Dec 09, 2007

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: HDMi ( no signal, not supported) doesn't work with Dmr-Ez47v

Return set!
Akai Tv is not HDCP compatible. Nothing worked akai was not very helpful. This model , a 2006. aparently will not communicate will the newer HDMI devices.
RETURN SET IF POSSIBLE. NO SOLUTION FOR THIS PROBLEM!

Posted on Jan 04, 2008

  • 12 Answers

SOURCE: HDMi ( no signal, not supported) doesn't work with Dmr-Ez47v

Any HDMI cable manufactured in the last couple of years should all be HDMI 1.1 compliant, your problem is most likely the logic board in the TV itself or the HDMI connector on the logic board has a bad connection..

Have you tried hooking-up a standard DB15 VGA cable to the AKAI TV and your laptop?

If this works your problem is in the TV and will most likely have to be repaired to receive the HDMI signal since your Panasonic DVR and your laptop are not recognized by the HDMI input on the TV.

Good luck!

Ren

Posted on Aug 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code F60 on DMR-Ez47V


Unfortunately, the F60 error means that the video processing board (digital PCB board with the HDMI port on it) has a failure. Often this happens when the capacitors on the board fail. Replacing the board or the failed components on the board is usually necessary. Some of the components may be available here: https://www.encompassparts.com/model/MSCDMREZ47V/_/_/Panasonic/DMREZ47V/DVD_RECORDER .

First you can try to reset the unit. Unplug it. Then plug it in after a few minutes. Then when you see the string of 0's, press and hold the power button. Then try to power up the unit normally. Alternatively, press and hold Stop and Hold while you power on the DMR-EZ47V.

I hope this helps. Unfortunately, I am not sure which part number applies to the part you need from the PC Boards available from the site above.

Cindy Wells

Dec 13, 2015 | Panasonic DMR-EZ47V DVD Recorder/VCR

1 Answer

Panasonic DMR - HW100ebk.......... with both coax


So you have looped the coaxial through the Panasonic to the TV and have a HDMI from the Panasonic to the TV, right. When you turn on the DMR select the appropriate HDMI connection with the TV remote and you will be OK.

Oct 11, 2013 | Televison & Video

1 Answer

I have been uing my Panasonic DMR-EX85 via a HDMI connect to my HDTV since January. I was having problems with the SBS signal so I disconnected all cables and reconnected, SBS signal is now better but my...


You may have a problem with some electrolytic capacitors inside the unit. Check you connections again and if still the same check for swollen capacitors inside the unit

Feb 03, 2018 | Panasonic DMR-EX85EB-S DVD Recorder/HDD...

1 Answer

Brand new dmr-ez49veb,has worked ok on setting it up.it is now stuck in vhs mode and will not respond using remote to select tv mode.I have scart and hdmi connections to tv and have tv input selected to...


i have a panasonic dvd rcorder / video combi model DMR-EZ49VEB. I have recorded something on DVD, which is 4 hours in duration, and I want to edit the recording and split it into parts. I follow the manual, but when I press EDIT the option to split isnt even there? I am confused, it is SUCH a difficult manual to deciphre, but the only 2 options there are "Edit title name" and "Change Thumbnail". The others are not listed. the disc is not copy protected or locked and is of sufficient duration to split the contents. HELP PLEASE :(

Dec 29, 2010 | Panasonic DMR-EZ47V DVD Recorder/VCR

2 Answers

Panasonic DMR-EX75 has stopped receiving digital signal


Panasonic DMR-EX75 has stoped receiving digital signa

Aug 01, 2009 | Panasonic Televison & Video

1 Answer

HDMi ( no signal, not supported) doesn't work with Dmr-Ez47v


Any HDMI cable manufactured in the last couple of years should all be HDMI 1.1 compliant, your problem is most likely the logic board in the TV itself or the HDMI connector on the logic board has a bad connection..

Have you tried hooking-up a standard DB15 VGA cable to the AKAI TV and your laptop?

If this works your problem is in the TV and will most likely have to be repaired to receive the HDMI signal since your Panasonic DVR and your laptop are not recognized by the HDMI input on the TV.

Good luck!

Ren

Jun 03, 2009 | Akai LCT2785TA 27 in. LCD Television

1 Answer

Picture from analog tv signal is not sharp


I have this same machine, you did'nt mention what input you are using (composite, S-Video, component or HDMI) or what type of display you have (CRT, LCD, Plasma etc.).
If your T.V. has a HDMI input I recommend using that, if not and it's of fairly recent vintage use the component inputs (not to be confused with composite video inputs, or yellow RCA-type input).or at the very least use the S-Video input.
In the setup menu (on screen) try setting the "TV Screen" option to the 480p setting and if you are using the HDMI input try setting that to the highest resolution your T.V. has or set it to "Auto"
Finally in the on screen video menu select the "Video" setting and set the "Still Mode" option to automatic, and the "Output Level" to lighter or darker whatever your preference is.
Remember...Always use HDMI or component video inputs on your television (if it has those inputs)!
Hope this helps!
Joe

Nov 19, 2008 | Panasonic DMR-EZ47V DVD Recorder/VCR

1 Answer

Need new manual


Hi - You can download the manual from the link underlined in blue below:

DMR-ez27

d16191b.jpg

Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Informatica

Aug 28, 2008 | Panasonic DMR-EZ47V DVD Recorder/VCR

1 Answer

Panosonic dvd recorder


Make sure your aerial's RF lead goes to the DVD first then out of that into the TV.

Apr 22, 2008 | Panasonic DMR-EZ47V DVD Recorder/VCR

3 Answers

HDMi ( no signal, not supported) doesn't work with Dmr-Ez47v


this is a good one i had the same problem about a year a go on my brothers we tried every thing nout worked i said put the video leads in and do it it worked a treat but i have herd it don't work for all so it sounds like an amplifier my be needed hope any of this can help you. sorry if it don't only trying to help

Oct 11, 2007 | Akai LCT2785TA 27 in. LCD Television

Not finding what you are looking for?
Akai LCT2785TA 27 in. LCD Television Logo

748 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2336 Answers

The Knight
The Knight

Level 3 Expert

75846 Answers

Marvin
Marvin

Level 3 Expert

82322 Answers

Are you an Akai Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...