Question about Kenmore Dryers

Open Question

Kenmore elite oasis dryer error codes - Kenmore Dryers

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Kenmore Elite Oasis Dryer 6705 not start

I take the timed approach with appliance problems. If they occur 10 years after purchase, I buy a new one. If five years, I call a repair service and measure the cost of repair against the purchase of a replacement. If one year or less after purchase, I pile the expensive, offending, useless lump of an example of the decline of American workmanship into the back of my pickup and push it out on the doorstep of the store where I purchased it.

I find this method to be the most cost-effective and least troubling. And costs me about the same as calling the repair service.

In fact, right now I'm loading up my Kenmore Elite Oasis 6705, purchased March 13, 2007, (note that the problem began one month AFTER the warranty ran out) in the back of my pickup and I will make at quick stop at Sears to push it off the back of my truck (I find if I don't stop, but keep the truck rolling it makes for a much louder and attention grabbing drop off) then find the nearest hardware store so I can purchase some strong nylon line to string across my backyard so I can dry my clothes. I also purchase a bit of extra line so that I have enough to string up any Sears or Kenmore representatives who might stop by to inquire about the appliance they found on their doorstep.

Posted on Apr 12, 2008

SearsTechToo
  • 261 Answers

SOURCE: Kenmore Elite Oasis error code F41

I don't see this code often although I can steer you in a good direction, F41 to F47 is error codes for dual motor problems on oasis.

Posted on Sep 13, 2008

  • 236 Answers

SOURCE: How do I install a dryer rack in my Kenmore Oasis

The rack goes in thru the door and rests on the back panel usually in small slots and just behind the door.

Posted on Sep 18, 2009

  • 3 Answers

SOURCE: f2 error code

F-02 error relates to a malfunctioning user interface board, most commonly a stuck button.

Here's a link to the technical sheet for it which includes some tests you can run to determine the problem:

https://www.servicematters.com/docs/wiring/Tech%20Sheet%20-%20W10035270.pdf

Posted on Jan 05, 2010

  • 1 Answer

SOURCE: Kenmore Elite Oasis Electric Dryer, Model #110.6708*, 6709*

Hi, my Kenmore Oasis Elite electric dryer has a poor fitting lint screen which allows for a large build up of lint in the bottom of the motor housing. This lint has also become blackened as if exposed to high heat. Some electric wires also show evidence of the plastic coating turning black and over heating. I get the feeling this unit is a fire hazzard. Model # C6704 A few days ago there was a distinct odour of electrical burning. This unit was purchased new in Dec. 08. Anyone else have this experience?

Posted on Apr 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore Elite Oasis Electric Dryer - no power (PF code)


Press and hold the "Start" button to restart the dryer cycle if the "PF" (power failure) error code appears. This code often appears when a cycle is interrupted before it completes. You may also check the breaker or household fuse, and ensure the machine has not come unplugged.


Read more: How to Repair Kenmore Elite Oasis Dryer Error Codes ' eHow.com http://www.ehow.com/how_7703883_repair-oasis-dryer-error-codes.html#ixzz1u

May 12, 2012 | Kenmore Elite Oasis 6808 Electric Dryer

1 Answer

My Kenmore Elite Oasis dryer has a CF code and continuously beeps. Running or not.


The CF error is a communication failure between the main computer and the touch panel...you may have a bad or weak connection or a bad computer..I wold recommend that you contact your local Sears and ask them about recalls, and for service should this happen again.

May 07, 2012 | Kenmore Elite Oasis 6808 Electric Dryer

1 Answer

Kenmore elite model #110-67042601 is flashing a AF code


The AF error code for Kenmore Elite Oasis dryers with model numbers 11067032601, 11067042601, W10035200, 11067032600, and 11067042600 indicates that the dryer is experiencing an airflow problem. The Kenmore Elite Oasis owner's manual recommends four troubleshooting solutions to an airflow problem: clean the dryer's lint screen, ensure that the exterior exhaust hood connected to the dryer is unblocked, ensure that the vent connecting the dryer to the wall is clear and see that the vent is cleaned professionally.


Read more: Error Codes on Kenmore Dryers ' eHow.com http://www.ehow.com/list_7192588_error-codes-kenmore-dryers.html#ixzz1MuOgWsZC it is found also on this link above by clicking the link if you have any further questions please message me back and your dryer should be dlinted at least once per year to avoid dryer breakdown you can also see how to dlint your dryer by clicking this tip that I wrote http://www.fixya.com/support/r8732702-prolong_life_dryer I await your reply if you have any further questions Thanks Rick

May 20, 2011 | Kenmore 72982 Gas Dryer

1 Answer

Error code F44 on sears kenmore elite oasis electric dryer.Doesn't seem to be cycling completely.


The F44 error code on this type of dryer indicates a blower motor control board failure. Since it happens only occasionally, then you could have a loose wiring connection or a partial obstruction in the blower housing. Complete details of the troubleshooting for this error code are included in this link of a previous answer: What does the fault code F44 indicate on my Kenmore Elite Oasis dryer?

I recommend that you unplug the dryer and check the wire harness connections if you are confident that you can safely access the internal dryer components. If you find a loose connection, then tightening it or plugging the harness securely into the connection will likely correct this problem.

May 08, 2010 | Kenmore Elite HE4 Electric Dryer

2 Answers

Kenmore elite oasis dryer model #110.6708 will not operate. flashes f-40. what does f-40 mean?


F40 = thermal fuse blown.
If the fuse is OK the error points to a communication problem between the machine control board and motor control board (check connectors).

Mar 19, 2010 | Kenmore Elite Oasis 6809 Electric Dryer

1 Answer

My dryer stops in mid cycle and gives me an error code of E1


It is a bad thermistor on the blower housing

http://forum.appliancepartspros.com/dryer-repair/1379-kenmore-elite-e1-sensor.html


Apr 18, 2009 | Kenmore Elite Oasis 6808 Electric Dryer

1 Answer

Kenmore Elite Oasis error code F41


I don't see this code often although I can steer you in a good direction, F41 to F47 is error codes for dual motor problems on oasis.

Jul 21, 2008 | Kenmore 67082 Electric Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3072 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...