My volume and mute button dont work on my sky remote

Most TV Remotes have a mute button as well as a volume up/down buttons. Change the remote batterys and see what happens.

I had this same problem and it was due to their instructions which do not adequately explain the setup procedure.

On my own, I was successful in programming volume up but that was all. I assumed that for volume down I would hold the power button and the VOLUME DOWN button and wait for the flashing light just as I had for volume up. Problem is, you never get a flashing light.

Today, I spoke with a rep from Boston Acoustics who patiently explained that step one of the instructions has to be done the same way each time as it is the step that puts the soundbar into programming mode.

It is only at step 2 that things change.

The solution is to hold the power button and the Volume Up button every time in order to get the system into programming mode. Once the light is flashing, in order to program Volume Down, you then hold the Volume Down button until the light goes solid. Once the light goes solid, then press the volume down button on your remote 4 times slowly. Works like a charm.

Works the same way to program the mute button. Follow step one to get the unit in programming mode. Once the light is flashing, hold down only the mute button until the light goes solid. When the light goes solid, press the mute button slowly 4 times.


OBTW, this was programmed with a Logitech Harmony 650 remote unit.

i have a goodmans tv GTV69RFDT and i have brought a one for all remote urc-3920-urc 3940. All the codes dont work, i have tried the seach method and still nothing is working properly, i get the number buttons and volume but no up channel and down or menu button. Need help

Dan

Some of these remotes are also made to run other components,so be sure to press the "tv" button and try the vol and channel again!

you can always use the button on your Tv itself.

ie menu = Menu
Channel up/down = take you up and down
volume = goes left and right.

follow these steps

Menu,
channel down button to CHANNEL
press the volume button along
channel down button to AUTO STORE
press the volume button to Start the scan.

right now you have your telly tuned in. What you could do it get an old sky remote off a friend/ neighbour. or buy from argos etc ( a lot cheaper then getting a replacement samsung one)

press the following buttons on the sky remote to program it to work with your samsung tv.

TV,
RED + SELECT
TV.
0060

try the volume if this works press SELECT to save this code if it doesnt press Tv then try the volume again. repeat this step until the volume works your telly. once it doest dont forget to press the SELECT button to save.

Now you will be able to change your volume use the number keys. if you also press the HELP button on the sky remote this will also change your AV / SOURCE I hope this post helps you out. When it does please leave a thumbs up for me Please

Cheers Little Dish Fitter

follow these steps below:

TV
RED + SELECT (flashes twice)
TV
0000
SELECT.

you owe me a pint!!
take care

Little Dish Fitter

please follow the steps below with you sky remote:

TV
RED + SELECT (hold these down until it flashes twice)
TV
0056

Try the volume button if this works then press SELECT. If it does not work then press TV again then try the volume ( repeat this step until the volume works. Dont forget to press the SELECT button to save the code to the remote.

This should sort you out. Please leave a thumbs up when you get it working.

Cheers Little Dish Fitter

Orion
0549
322,383,263,205,039,065,053,205,348,349,392,544,572,
more..

054
Try this maybe it will help

Hi Re Easytouch 42" HD TV - look for Hisense - I took a guess and LCD3204 EU code 376 - remote works but buttons don't tally up - getting there slowly!

Just bought a madeforyou 4:1 remote that is programmed on my PC.

Ok - not proper solution yet but nearly there!

I HAVE THE SOLUTION TO THIS PROBLEM.

Confirmed with Samsung tech support. Problem is with remote. to fix, simple take the batteries out of the remote. Press and hold the UP Volume button for 2 Mintues (no cheating, it has to be at least 2 minutes), this Reset's the Remote Control. Put the batteries back in. Bob's your uncle. all fixed.