Question about Computers & Internet
Not able to go to bios setting after login it is asking for password and i have forgot the same
There are ways around that but it would be inapropriate for me to share them as an engineer. I suggest you contact a computer tech and ask for assistance at his workshop,
Posted on Nov 21, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Ibm thinkpad A30 2652
Some of the older thinkpad had a program you from the OS or a boot floppy to had to run to get change the bios settings. But the BIOS key on most is F1. So if you press that key as soon as you turn the machine on and anything appears on the screen, and once you've provided the password you can then change the password to blank within the bios.
If you don't know the password at all, there may still be a way to reset it, but it may require a call to IBM/Lenov, or some other tedious process.
Posted on Feb 02, 2008
IM ZOE BOY(509) AND I LL LET U KNOW HOW TO DEAL WIT DAT SMALL ISSUE IF UR LOCKED OUT AND ONCE YOU TURN ON UR PC ITS SAYS ENTER PASSCODE THATS THE EASIEST THING EVER HERE IS UR ANSWER:
1_DISCONNECT THE NOTEBOOK FROM THE POWER CABLE
2_GO ON THE BACK OF UR PC LOOK FOR THE BIOS IT LOOKS LIKE A WATCH BATTERY
3_REMOVE IT FOR LIKE 30 SECOND THEN PUT IT BACK AND TURN ON UR PC BACK ON
P.S MAKE SURE ITS UNPLUG AND WITHOUT THE BATTERY CAUSE WE DONT NO POWER AT ALL DURING THE PROCESS..........
U LL BE ABLE TO GET ACCESS WITHOUT ASKING NO DANM CODE BUT IF YOU HAVE TIME PRESS F2 TO RESET IT WITH YOUR OWN CODE NEXT TIME IT TURNS OFF U DONT HAVE TO WORRY A BIT.
IF U R NOT LUCKY U MIGHT FIND ANOTHER LOCK AFTER PASSING THE BIOS THAT A PERSONNAL ONE GOHEAD DO UR THING LET ME KNOW WHAT GOIN DOWN WHEN FINISH WITH UR HOMEWORK.....
ZOE BOY=HAITI,PORT AU PRINCE.
Posted on Apr 22, 2009
For that you need to reset factory defaults settings for bios.
For reset bios u have to open back side of your laptop then u find motherbord circuit there.
pull cmos cell on motherbord for 15 minute then it reset to defaults.
Also u can reset with jumper settigns read carefully on mother bord there is 1 jumper near cmos cell u read there " bios reset or clear"
It is on 1-2 position right now set it in 2-3 position then power up then all bios settings are reset.
then again set it in 1-2 its original position.
Posted on Jul 29, 2009
Tips for a great answer:
Mar 08, 2011 | IBM ThinkPad T41 Notebook
The hard-disk password (HDP) protects the data on your removable hard disk drive from being accessed by unauthorized persons.
The supervisor password protects the system information in Easy-Setup from being changed by unauthorized persons.
How to Reset an IBM ThinkPad Power On Password using Software
If you can boot the IBM ThinkPad, KeyMaker will recover the BIOS password.
How to Reset an IBM ThinkPad Power On Password Using Hardware
If you cannot boot the ThinkPad, you will have to reset the IBM ThinkPad password via hardware.
If only the power-on password is set, do the following to remove the power-on password.
If both the power-on password and the supervisor password are set, do the following to remove the passwords:
Oct 26, 2010 | IBM ThinkPad X21 2662 Notebook
Jan 06, 2010 | IBM ThinkPad R51 Notebook
Oct 19, 2009 | IBM ThinkPad X30 2672 Notebook
Sep 05, 2009 | IBM ThinkPad T21 Notebook
Mar 25, 2009 | Lenovo ThinkPad R51
Feb 06, 2009 | IBM ThinkPad R51 Notebook
Feb 04, 2009 | IBM ThinkPad R51 Notebook
Feb 02, 2008 | IBM ThinkPad T40 2373 Notebook
22 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: