Question about Refrigerators

6 Answers

Daewoo refrigerator water filter red light still on after replacing the filter

Hi, i just replaced the water filter (model DD 7098) of my Daewoo refrigerator model FRS-2031EAL, following the steps exactly like thu user guide says, water is running clear and pressure is higher because a lot of dirt came off, but the red light that indicates replace is still on. Thanx in advance for your advice

Posted by on

  • 3 more comments 
  • Mike Smith Apr 06, 2008

    I have just installed a GE GSH25JSTSS, SIE-BY-SIDE REFRIG. I installed the filter and verified watter pressure from walll valve is high. However, a few drops came of of the door and then nothing. Now, the Locked light is on and I can't get any button (including the light) to actuate. So... how to unlock this refrig and get water coming out of door? It is only 2 hours old, so I don't have ice yet. I hope it makes ice.

    Thanks

    Mike, Houston

  • MMagoo May 27, 2008

    Hi - had the water connected to my fridge freezer at Christmas. The red light came on within 6 weeks of the connection. I now desperatelty need to put a new filter in as the water tastes funny. However, I have no manual and have looked at the internet for instructions. I can't believe that I have to pull out the appliance (i know that I will mark my new floor) and am not confident with what it says I have to do. Please explain in simple terms. Thank you.


    1. M

  • Johnboy50 Jul 11, 2008

    I have a Samsung RS2578BB,I have moved lately and misplaced my manual. I need to turn filter red light off?

    Johnboy50

  • Anonymous Mar 28, 2014

    I am have a Refrigerator Model# FFHWS2622HW3 the filter will not seat in. Before installing new filter I turned off water and bled the pressure off the line. This is a Pure 2 filter in the upper right corner.

  • Anonymous Mar 28, 2014

    Filter will not seat even after bleeding pressure off the line and turning off water Model# FFHs2622HW3

×

Ad

6 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Press and hold "ICE MAKER LOCK" button, and while holding it shortly press "LOCK" button, and the light will change to green LED.

Ivan

Posted on Nov 12, 2007

Ad

Press and hold "ICE MAKER LOCK" button, and while holding it shortly press "LOCK" button, and the light will change to green LED.

Posted on May 03, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Thanks it was the perfect solution for replacing the red light to green

Posted on May 03, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

GREAT !!!
(1) Hold down "ICE MAKER LOCK"
(2) Press "Lock"
(3) Open fridge and pour yourself a nice cool drink to congratulate yourself for turning off the red light

THAT WAS WORK

Posted on Sep 17, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

(1) Hold down "ICE MAKER LOCK"
(2) Press "Lock"
(3) Open fridge and pour yourself a nice cool drink to congratulate yourself for turning off the red light

Posted on Sep 06, 2010

Firts read the owen´s manual,

Posted on Oct 09, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Red light


Try firsd doing a complete defrost, leave fridge unplugged at least 24 hours

May 28, 2008 | Samsung RS2630SH Side by Side Refrigerator

1 Answer

Have changed water filter, but indicatot panel calls for order h2o filter, and comes on every time we dispence water. why?


Most models also have a filter indicator reset button located in the same area. After changing the filter, reset the filter status light by pressing the Filter Indicator Reset button or by pressing and holding the Filter button for 3 seconds. The status light will change from red to green or the status display will change from "Replace" to "Good" when the system is reset.

If your model has a water filter indicator, but no reset button, press the light switch in the refrigerator compartment 5 times within 10 seconds to reset the system. The status light will change from red to green when the system is reset.

Oct 16, 2012 | KitchenAid KBFA25ER Bottom Freezer French...

1 Answer

Red light on to replace water filter, how to do this?


Knowing just who made your Kenmore refrigerator may some day be important because Kenmore does not make the brands they sell. I am going to try to get you as many different ways the water filter can be changed as I can but if you can you locate the model number of your Kenmore it may make things much easier should you need parts or a manual some day. The number should look like this 521.345678 and located around the inside of the fresh food section door.
6_25_2012_9_42_33_pm.jpg
Here nis what I have found on different models and water filters from Whirlpool How to Replace In-Grille Refrigerator Water Filter - Push Button
How to Change the Water Filter in Your Refrigerator
Whirlpool Part UKF7003

How to Change a Kitchen Aid Refrigerator Water Filter

Read more:
If by chance you are able to find your model number that looks like the 513.235647 I mentioned before this will solve just what instructions you need or you can post a photo here or swend one to my email appliancepartsse (@) yahoo.com and I will be glad to help you get a manual and instructions for changing your water filter, Thanks Sea Breeze

How to Replace Interior Refrigerator (Filter1) Water Filter





Jun 25, 2012 | Kenmore Side by Side Refrigerator

1 Answer

After i change the water filter de button of water still red


The water filter status light, located at the top of the refrigerator

compartment, will help you know when to change your water

filter cartridge.

Style 1 - Standard status light (on some models)

When the water filter status light changes from green to yellow,

this tells you that it is almost time to change the water filter

cartridge (90% of the filter life has been used). It is recommended

that you replace the base grille water filter cartridge when the

water filter indicator light changes to red OR water flow to your

water dispenser or ice maker decreases noticeably. See

"Changing theWater Filter Cartridge" later in this section.

After changing the water filter cartridge, reset the water filter

status light by pressing the light switch 5 times within
10 seconds. The water filter status light will change from red to
green when the system is reset.
If you need Adobe Reader Click=> Adobe Reader X (10.1.0) (50.25 MB)
If helpful please rate this solution, Thanks Sea Breeze
Click Photo Below for User Manuals


sea_breeze_227.jpg

Jul 29, 2011 | KitchenAid Superba KSRG25FK Side by Side...

1 Answer

Changed water filter and bushed lock & water buttons, red light went off but green light and other indicator lights (crushed ice, cubes, night light) did not work. Removed new filter & put . .back...


Below are instructions to reset water filter light. Thanks, Sea Breeze
If helpful please rate.

Reset Filter (select models)

When a water filter has been installed in the

refrigerator, the yellow Order light will illuminate when

90 percent of the volume of water for which the filter is

rated has passed through the filter OR 11 months have

elapsed since the filter has been installed.

The red Replace light will illuminate when the rated

volume of water has passed through the filter OR 12

months have elapsed since the filter was installed. A

new filter should be installed immediately when the

Replace light is illuminated.

After replacing the filter, press and hold the Reset

Filter pad for three seconds. The Order and Replace

lights will go off.

Vacation Mode

The Vacation Mode feature causes the freezer

to defrost less frequently, conserving energy. The

Vacation Mode indicator light will illuminate when the

feature is activated. To deactivate, press the Vacation

Mode pad again OR open either door. The indicator

light will go off.
Temp Alarm

Apr 22, 2011 | Amana 22.6 cu. ft. Side-By-Side...

1 Answer

Red light stays on after changing the water filter and running about 2 gallons through it


Water Filter Status Indicator
Light (select models)
The Water Filter Status Indicator Light serves as a
reminder to replace the water filter. A green light
indicates that the filter is in good condition. A red light
indicates the filter should be changed. Once light turns
red, it will remain red until function is reset.
To Reset Indicator:
• Press and hold both the Lock and Water
buttons simultaneously for four seconds. The
green filter status indicator light will flash
three times when the function has
successfully reset.

Nov 27, 2009 | Maytag MZD2665HE Side by Side Refrigerator

1 Answer

Change filter light


Water Filter Status Indicator
Light (select models)
The Water Filter Status Indicator Light serves as a
reminder to replace the water filter. A green light
indicates that the filter is in good condition. A red light
indicates the filter should be changed. Once light turns
red, it will remain red until function is reset.
To Reset Indicator:
• Press and hold both the Lock and Water
buttons simultaneously for four seconds. The
green filter status indicator light will flash
three times when the function has
successfully reset.
Sea Breeze

Nov 25, 2009 | Maytag MSD2650H Side by Side Refrigerator

1 Answer

Red light blinking after replacing filter


Not positvie for that model but there should be a little reset button, or try just unplugging the unit and waiting 60 secs before plugging it back in. Hope that helps

Sep 05, 2009 | KitchenAid Superba Architect KSCS25INSS...

1 Answer

Changing light after installing new water filter


Water Filter Status Indicator Light
(select models)
The Water Filter Status Indicator Light serves as a
reminder to replace the water filter. A green light
indicates that the filter is in good condition. A red light
indicates the filter should be changed. Once light turns
red, it will remain red until function is reset.
To Reset Indicator:
• Press and hold both the LOCK and WATER
buttons simultaneously for four seconds. The
green filter status indicator light will flash
three times when the function has
successfully reset.

Aug 12, 2009 | Jenn-Air 21.6 cu. ft. Side-By-Side...

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

1,849 people viewed this question

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

Charles T Nevin
Charles T Nevin

Level 3 Expert

4070 Answers

John Tripp
John Tripp

Level 3 Expert

4655 Answers

yadayada
yadayada

Level 3 Expert

78267 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...