Question about Eiconcard C91 V2.0 (306231) Network Adapter

1 Answer

Collision between 2 Eicon cards C91 V2.

Hello, I write to ask for aid on an installation of 2 computers with cards eicon card c91 v2. Both connected to a Port Sharing, different connections. But at least one of them does not want to connect. They could help me with this case.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers
Re: collision between 2 Eicon cards C91 V2. - Eiconcard C91 V2.0 (306231) Network Adapter Network & Wireless Adapters

Check out the firewall settings

Posted on Jan 05, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Questing for an SMZ1244TX v2 driver for Win7 32 bit(pref x64 but I ain't holding my breath), otherwise known as the SMC-EZ10/100 "Compaq Special". Card came out of an ancient Compaq Presario 5000 Seri

First things first, x64 is for a 64 bit platform which your OS isn't ,but secondly if this card is ancient then it probably won't be supported on that platform anyways. Lookup the driver for a x86 (yes it's a higher number but it stands for the 32 bit OS your on. Why? That's another story) once you find the x86 bit driver to install it, just put windows 7 into compatibility mode for the windows version that driver was meant for. Confirm the changes in the bios and everything should work.

Dec 09, 2013 | Network & Wireless Adapters

1 Answer

Controller driver

I found this LINK but you need to register before download the drive.Hope this help you.

Jul 15, 2013 | EiconCard S94 Network Adapter

1 Answer

For aboutfive years i have successfully had a orange live box installed in my home and, again successfully have 2 wireless computers. How ever my oldest computer doesnt have wireless option installed on to...

First be sure to check the drivers for your Netgear WG111 are up to date and correspond to your Operating System. It is important to note that there are three versions of the WG111. If you visit the Netgear's Knowledge Base site you can see the difference between the 3 versions (v1,v2 and v3) and select the one that corresponds to you. If you don't know what version you have look for a v1, v2 or v3 after the model name:


After you determine which version you have, let suppose its v3, click the link corresponding to it and download the Software Version 2.0.0 (Supports Win 7) if you are using Windows or the WG111v3 Mac OS Driver Version if you are using a Mac. Once you download the file, run the executable file and install the driver/software for your device.

If your problem is not with drivers then youshould look at you Wireless Network Setup. Please Check that the router has a source of a working internetconnection plugged in correctly via an ethernet cable. Also, routers need fromtime to time to be rebooted. Try disconnecting the router from the power sourcefor 15 to 10 seconds and connect it again.

Post more details concerning your OS, the router you are using and what type ofinternet connection you have(DSL or Cable).

Mar 05, 2011 | NetGear WG111 802.11g/b Wireless Adapter

1 Answer

I need NETGEAR WG511 v2 driver to install in my computer.How can I get it?

Please point your web browser to the following web-site:
Click on the downloads tab below the picture of your card.
Click on the link to download your software. Should be quite simple. Then simply follow installation instructions for software/drivers.
Hope this helps and thank you.

Jan 07, 2011 | NetGear Network & Wireless Adapters

1 Answer

Belkin f6d4050 v2 - how to make it work with windows 7?

Most Probably this Will Work

Download the Drivers For Vista 64 Bit From

Step 1 : Right Click on the exe File And select Properties

Step 2 : Click The Compatibility Tab

Step 3 : Select Run this Program in compatibity mode For Win Vista SP1

Step 4 : Click Apply

Step 5 : Now try to install it

Jan 09, 2010 | Belkin N1 Wireless USB 2.0 Network Adapter...

1 Answer

Zyxel model G-220 v2 usb wireless adapter won't connect

If you are trying to connect a computer wireless card to a wireless router then follow my instruction on how to configure the wireless router and the wireless card in the computer - click on this link :-

Dec 14, 2009 | Zyxel Network & Wireless Adapters

1 Answer

Wg511 v2 'sees' the network but just won't connect just keeps scanning, updated to latest driver but still no go. Pulled out old WG111 v2 USB wireless card and it connects straight away. Pull the Wg111v2...


Follow the step below to configure wireless connection.

1. Right click on My Computer icon and go to Manage.
2. Go to Services then go to Service and Applications.
3. Double click on Wireless Zero Configuration.
4. Change the Start Up Type to Automatic and click on Apply
5. Click on Start and press OK to close the window.
6. Go to 'Control Panel', Click on Classic View in the left hand side menu and then open 'Network Connections'.
7. Right-click on the wireless Network Connection icon and select 'Properties'.
8. Go to the 'Wireless Networks' tab .
9. Check the option 'Use Windows to Configure this Wireless Connection' and click 'OK'.
Now please perform the following instructions to connect to the wireless network:
1. Go to 'Control Panel', Click on Classic View in the left hand side menu and then open 'Network Connections'.
2. Right-click on the wireless Network Connection icon and select 'Properties'.
3. Click on the 'wireless network' tab.
4. Under Preferred networks if you see any name in the list then highlight the name and click remove.Click OK.
5. Right-click on the wireless Network Connection icon and select 'View Available Networks'.
6. Look for the SSID (aka Network Name) of the Wireless router or access point.
4. Highlight the SSID from the list that you want to connect to.
5. Type the security Key here and click on the 'Connect' button.
6. You should have successfully established a wireless network connection.

I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.

Jun 30, 2009 | NetGear WG511T 802.11g/b Wireless Adapter

1 Answer

Driver netgear

To download the drivers for the adapter, visit the link below:

Mar 12, 2009 | NetGear WG511 54Mbps 802.11g Wireless PC...

1 Answer

Can't find any network

Same **** here .... All I am finding all over the internet is people complaining about this card. WTF how Asus could make such a pice of **** ??? My card sometimes connects to the router sometimes doesn't and when it does the speed it terrible really. Did almost everything with it so far nothing helped. I wonder if I can take it back and ask for money back.

Mar 11, 2009 | ASUS WL-138G 802.11g/b (wl138g) Wireless...

2 Answers

Voda-Phone V2 - Touchscreen doesn't recognize touch

Try to put only one SIM card in slot #2.
Now maybe the touch screen is working-
If not, try to put only one SIM card in slot #1.
The problem could be the 2 SIM card at the same time (also if it should be recognize 2 in the same time).
I have seen a V2 with this problem. Regards, davide

Dec 24, 2008 | Vodafone Mobile Connect (055270) Wireless...

Not finding what you are looking for?
Eiconcard C91 V2.0 (306231) Network Adapter Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eicon Network & Wireless Adapters Experts


Level 3 Expert

18259 Answers

 C. Dante
C. Dante

Level 3 Expert

623 Answers


Level 3 Expert

2072 Answers

Are you an Eicon Network and Wireless Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides