Question about Soyo Computers & Internet
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
http://www.soyo.com/store/cart.php?m=search_results&search=sy+kt880+dragon+2+v2.0. Download your drivers that are on the cd from this link at soyo.RICHARDM69..THIS IS A SOLUTION PLEASE VOTE
Posted on Dec 29, 2008
SOURCE: Soyo SY-K7VMP2 manual
To start you need to go to some of the links here and find the manual.
When I tried, the main site was not accessible. That can change for a number of reasons. The manual may be able to be found at other sites.
Hope you find it.
Since this board is over 7 years old (2002) as stated at the link above, it may be to your advantage to upgrade to a newer board.
Another thing which you will find is that the bios probably should be flashed to get the newest version for this board. Before going too far on this board, everything should be checked over visually. Such as the dust, the components and so on on the surface of the board. You will have to decide.
Posted on Aug 31, 2009
Bios settings are retained by the Motherboard Battery in the CMOS.
Disconnecting the battery clears CMOS and returns the settings to their
original state. Typically this can be done by simply removing the CMOS
battery and waiting about 15 seconds before reinserting and booting PC.
Nowadays most Motherboard manufacturers supply a jumper to not only
disconnect the battery but also ground the CMOS to effectively drain
any residual power.
The instructions for your MB are found below. JP5 is located to the left of the battery and next to the PCI 2 slot on your MB. There is a Manual for your MB on this site and the MB layout can be found at
Follow the steps below to clear the CMOS memory.
1. Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5. Its white cap can easily identify this jumper.
2. Put the jumper back to 1-2 to allow writing of new data into the CMOS memory.
Posted on Jan 08, 2010
Tips for a great answer:
May 10, 2011 | Soyo P4VGM v1.0 (MB-SY-P4VGMV1.0)...
Apr 05, 2011 | Soyo SY-P4S DRAGON Ultra Motherboard
Feb 07, 2011 | Soyo P4VGM v1.0 (MB-SY-P4VGMV1.0)...
Sep 22, 2010 | Soyo KT600 Dragon Plus Motherboard
Jul 10, 2010 | Soyo SY-P4VGM Motherboard
Jul 09, 2010 | Soyo SY-KT333 DRAGON Ultra Platinum...
Feb 17, 2010 | Soyo SY-K7VME Motherboard
Nov 06, 2009 | Soyo SY-6IZA Motherboard
25 people viewed this question
Usually answered in minutes!