The red will not line up. What part do I need to replace?

3 blinks is indicating that the convergence has a problem The PT53WX53G convergence repair kit from www.tvrepairworld.com is the correct kit for your model. The kit contains the ICs, Resistors and the CD with repair instructions.

On my Panasonic PT-56TW53, the down left quarter of the screen has a big colour distorsion. Convergence can adjust blue and red, but green is not able to show a straight line. Is tis a mechanical adjstment? Help would be great.

Thats the error code for the convergence circuit shutting the set down The PT4743G uses the PT53WX53G convergence repair kit which is available from www.tvrepairworld.com the kit contains the parts and the CD with detailed repair instructions.

Thats the error for convergence failure. You can get the PT53WX53G convergence repair kit at www.tvrepairworld.com the kit contains the parts and CD with instructions.

thats the error for the convergence failure. You can get the repair kit for your model at www.tvrepairworld.com the kit contains the parts and the CD with detailed instructions

You need the PT53WX53G convergence repair kit which is at the following link. The kit contains the components and detailed instructions on CD to do the repair.
http://www.tvrepairkits.net/

The 3 blinks is a error code for the convergence circuit. You can get the convergence repair kit for your model at the following link which contains both Convergence ICs and all six feed resistors and they include step by step instructions with pictures that show how to do the repair yourself. Heres a link to the proper kit for your model Panasonic.
http://servicemanuals.vstore.ca/product_info.php/pName/panasonic-projection-tv-convergence-repair-kit-2/cName/convergence-repair-kits

the red light flashing means the set is in auto shut down, could be a power supply problem or a convergence IC problem. tech should first check all diodes and caps in power supply then replace convergence IC's

The resistor you see is a 2.2 ohm 2 watt resistor and is part of the convergence circuitry. I would replace R7011. 7012, 7013, 7014, 7015 & 7016 (all the same value) and the 2 STK392-110 Convergence ICs. This should fix your problem. You can find kits on-line for around $45 with the IC's and resistors together.

you need to replace both convergence ICs they are both STK392-110 you can get replacment Ics at the following link with free step by step instructions with pictures. here is the link.
http://servicemanuals.vstore.ca/