Question about Konica Minolta magicolor 2430 DL Laser Printer

5 Answers

Error code I have used the "continue" menu after refilling my toners and this worked great. Now I get an error code: "Err: line 2408" which I can not get past. Service manual I have does not list this code.

Posted by on

  • msunderstood Mar 30, 2008

    Same printer - Same 3408 Error --- says black tomer is mt but when I put in a new replacemet cartridge - Konica Minolta --- it still says the same thing - I've tried 2 new cartridges. HELP!!!



5 Answers

Not the toner chip in my case --- I've bought all brand new Konica-Minolta cartridges. Still having the same stuff happening! Error 2408 and I have set it to Continue, BTW.
If anyone knows about this - PLEASE help!!! I'm about to throw it away and buy another HP 3600n!

Posted on Oct 15, 2008

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

Where i can find magicolor 2400 serie service manual, please help me ?

Posted on Oct 15, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Yes, the toner chip has to be replaced. This occurs when you use refilled cartridges. The helpdesk of the shop where you bought the cartridge should send you one for free.

Posted on May 30, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Thanks for trying BUT - I've replaced it with 2 different new Konica Minolta cartridges!!! Neither work

Posted on Mar 30, 2008

Toner chip is gone replace cartrige

Posted on Oct 12, 2007

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Cartridges error on a lexmark

Error: "Invalid Toner Cartridge"; Error: "Invalid Refill"; Message: "Change Cartridge"
One of these error messages may appear on the printer display immediately after or shortly after a new toner cartridge is installed into the printer. Note: This may not be specifically a toner cartridge problem; the error may be due to a stuck cover open switch on the printer.

To see if the cover open switch is the cause of this problem, open the top front cover and observe the message on the printer's display panel. The display should read Close Door or Insert Cartridge.

If this message is not displayed, the top cover open sensor and switch will need to be replaced. In addition, the printer may have damaged the new toner cartridge. If the cover open sensor is not operating properly, a new cartridge can be incorrectly flagged as a refilled cartridge by the printer. If this happens, the new cartridge will continue to cause an Invalid Refill or Invalid Cartridge error even if you try reinstalling it or installing it into another printer. If this should occur, please contact the point of purchase of the cartridge to find out how to get the cartridge replaced.

Caution: If the cover open sensor is not operating, do not install another new toner cartridge until you have completed the directions below. Inserting another new cartridge can cause that cartridge to stop working as well. Should this situation arise, please take the following actions:

Place the original working cartridge (the empty or near-empty one) back into the printer. This should clear the error message.

Turn the printer off. Doing this will disengage the cover open sensor.

With the printer switched off, open the top lid and remove the old toner cartridge.

Now replace the old cartridge with another new Lexmark toner cartridge.

Power the printer back on. The printer should now read this cartridge as a newly installed toner cartridge and the error should be cleared. The printer and toner cartridge should function properly now, but the top cover sensor on the printer will still need to be replaced.

If your printer is still under warranty or covered under a service contract, please contact Lexmark Technical Support or your service provider for further recommendations and instructions. Until you can get the cover open switch replaced, remember to have the printer powered off whenever you replace the toner cartridge.

If the top cover switch appears to be working fine, or if you have followed the above steps and your printer continues to post an Invalid Toner Cartridge or Invalid Refill error, make sure you are using a new original Lexmark toner cartridge. A toner cartridge remanufactured or refilled by a third party can cause this error.

To help identify a refilled cartridge, look for the yellow label attached to the toner drum and the body of the toner cartridge. If this is damaged or removed, the cartridge may have been refilled.

If you are using a third-party refilled or remanufactured toner cartridge, it is recommended that you install a new Lexmark brand toner cartridge. Lexmark cannot guarantee the compatibility of any third-party toner cartridges with our printers.


1 Switch on the Lexmark X83 printer.

2 Lift open the cartridge door at the front of the device, below the scanner unit. The printer automatically moves the cartridge carrier to the correct position.

3 Pull each ink cartridge toward you to unclasp it from the carrier. Lift the cartridge out of the cartridge carrier.

4 Clean the copper contacts on the bottom of each cartridge with a clean, dry lint-free cloth. Use a gentle, circular motion to clean the contacts.

5 Insert the ink cartridges back into the cartridge carrier. Push back firmly on each cartridge until it snaps into place.

6 Repeat each step in this procedure again. Close the cartridge door.

Oct 04, 2012 | Office Equipment & Supplies

1 Answer

What's your problem?my problem is canon np4050 machin err cod (e020)

just clean the hopper and dp unit then refill the toner ,or remove the dp connector (do not connect it)but after that the hopper dose not work and refill toner directly into dp

Oct 11, 2011 | Canon NP 6050 Copier

1 Answer

Have a Konica Minolta 2430 DL and it ask me to install blk toner after install toner it has error line 2408. can you help me?

2408 means that the toner cartridge you are trying to rotate to is already in the top position or you need to install another toner cartridge before you can rotate to the color you want to replace.

To fix the toner not installed message clean the three contacts on green chip on the right side of the toner cartridge. You may see black lines on them. Use an eraser or rubbing alcohol.

Nov 11, 2010 | Konica Minolta magicolor 2430 DL Laser...

2 Answers

How to solve CRU Fuse error ?

Check the TONER Cartridge and Reinstall it

CRU Fuse Error
Means : The toner cartridge is not installed correctly

You can set the machine to ignore the “[Toner Empty]”
message and to continue printing incoming faxes.

Ignoring the Toner Empty Message

1 Press Menu until “Machine Setup” appears on the display.
2 Press the scroll button < or > until “Ignore Toner”
appears on the bottom line and press Enter.
3 Press the Scroll button < or > to select “On” or “Off”.
Select “On” to ignore the [Toner Empty] message.
Select “Off” to stop printing incoming faxes when the
message appears. This is the default setting.
4 Press Enter to save the selection.
5 To return to Standby mode, press Stop/Clear.

Jan 21, 2010 | Samsung SCX 4521F All-In-One Laser Printer

4 Answers

Brother Toner Refills

Yeah you can refill your cartridge. It is really easy and consists of removing the plug on the side of the cartridge, dumping out any old toner and dumping in the new toner. Its very easy. I have purchased refill kits from both of these sites in the past and its worked great:

They also have great customer service. I hope this helps!

Nov 08, 2009 | Brother DCP-7040 Laser Printer

2 Answers

How do I reset the drum life of a DCP7010

never ver use refil toner on brother products. to answere your first question 1 open the front cover 2 push menue button scroll down to machine info press set buton 3 scroll down to drun lif - push set

Jan 09, 2009 | Brother DCP 7010 Multifunction Laser...

1 Answer

Error code 000002-0010

You need to clear this fuser roller heat rod error in svc mode.

Additional Functions="star"
2and8= hit both keys same time.

Svc mode= star 2and8 star



If there is areal problem with fuser heat rods it will code again.

Nov 08, 2008 | Canon imageRUNNER 5000 Copier

2 Answers

Error 2408

2408 means that the toner cartridge you are trying to rotate to is already in the top position or you need to install another toner cartridge before you can rotate to the color you want to replace.

To fix the toner not installed message clean the three contacts on green chip on the right side of the toner cartridge. You may see black lines on them. Use an eraser or rubbing alcohol.

Jul 11, 2008 | Konica Minolta magicolor 2430 DL Laser...

2 Answers

Toner not installed problem Err: Line 2408

i have the same problem. my printer says all of the toner cartridges are not installed. i have taken each one out and returned them, and have rebooted the printer multiple times. nothing helps.

May 30, 2008 | Konica Minolta magicolor 2430 DL Laser...

15 Answers

Samsung scx-4521f fax memory received but never print out.

In 3 second make combination on you Samsung 4521F 'Menu'-#-1-9-3-4. You will enter in tech menu. Select 'toner'-new toner-yes. You will receive faxes. It really works.

Oct 24, 2007 | Samsung SCX 4521F All-In-One Laser Printer

Not finding what you are looking for?
Konica Minolta magicolor 2430 DL Laser Printer Logo

617 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6595 Answers

Adorjani Laszlo

Level 3 Expert

1297 Answers


Level 2 Expert

108 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides