Question about Jura Capresso Impressa F9 Espresso Machine

Open Question

The tray won't close properly - Jura Capresso Impressa F9 Espresso Machine

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The CD door or drawer won't close properly with out giving it a nudge just before it suppose to close, other wise its ajar just slightly!


I have had a couple of drives with that symptom. Tried cleaning the guide rails and applying a drop of silicone lube to the rails. No change. Concluded the little motor was becoming too weak to close the tray, so back to the nudge and hope routine

Apr 20, 2013 | Crosley CR78 CD Shelf System

1 Answer

Problem with the tray.it is not working properly and cant come out


f the tray won't open or close properly, check the belt for dirt or wear. Then check the tray for misalignment. If needed, remove, clean, lubricate, and reinstall the tray following the instructions in the owner's manual
God bless you

Sep 27, 2012 | Philips DVP-3005 DVD Player

1 Answer

Problem with the dvd tray


f the tray won't open or close properly, check the belt for dirt or wear. Then check the tray for misalignment. If needed, remove, clean, lubricate, and reinstall the tray following the instructions in the owner's manual

God bless you

Sep 27, 2012 | Televison & Video

1 Answer

Wont read discs


follow this steps, and use the common sense.God bless you
If the player skips, make sure that the DVD disc is not dirty or scratched..Use the cleaner disk buy it from R. Shack.
If the tray won't open or close properly, check the belt for dirt or wear. Then check the tray for misalignment. If needed, remove, clean, lubricate, and reinstall the tray following the instructions in the owner's manual.

Sep 19, 2012 | Panasonic DMR-EZ37VK DVD Recorder / VCR...

1 Answer

Cd tray won't close


Use a can of compressed air to clean out any dust or dirt, if that won't work! gently pull all the way out to see if anything is catching, if the tray is stiff to move it is out of alignment. Have a computer shop take a quick look at it, may need to be replaced.

Apr 12, 2012 | Computers & Internet

1 Answer

My 360 kinect won't read disks. It says open tray,


my x box 360 Kinect want work because when I put the game in it said open and close the tray

Apr 08, 2012 | Video Game Consoles & Games

1 Answer

Tray won't open


by just resetting the software will not work this is a mechanical problem this usually happens on players that is not use for a long time or improper closing of tray..fixing this kind of problem requires opening the cover of the unit..you need to lubricate all moving gears and parts by putting enough amount of lubricating oil..you have also need to assist the motor manually by helping it to push the tray out just gently pull the tray with your hands during a eject command on the unit clean also the limit switches of the tray make that contact are properly working..good luck!

Apr 06, 2012 | Kenwood DV-605 Multi-disc DVD Player

1 Answer

The tray on player won't stay closed therefore I can't play a dvd.HELP


It sounds like there is something inside the dvd player, that isn't supposed to be there, that is keeping the tray from retracting fully. Try unplugging the unit and gently turning it upside down and giving it a little shake. Not too hard. This might jar the item loose, you will hear it knocking around. If you do knock something loose turn the unit so the front is pointing up and let the foreign object fall to the back of the unit where it hopefully won't interfere with the operation of the mechanisms inside. If you don't hear something come loose, remove the screws on the bottom, sides and back of the unit to remove the top cover. Make sure you have unplugged the power before you do this. take a look and see if you can find something jammed in the track or the gears for the tray. If you do gently remove the item with your fingers or a pair of needle nose pliers. Once removed replace the cover and away you go. If there is nothing blocking the tray and the mechanism, you probably have a gear system to close the tray. At some point someone must have pulled fairly hard on the tray causing the gear teeth to jump, check and make sure they aren't damaged or stripped. You are going to have to them either remove one of the gears (or pull it up so it can turn without turning any other gears) push the tray back into the fully closed position and replace the gear. Once you have done this you will want to test to make sure the tray will function properly. Place the top cover back on, but don't secure it with the holding screws in case you need to open it back up again, plug the unit in and test the tray. If it works unplug it and secure all the screws for the cover and away you go. Otherwise you are going to have to play with the gears till it is back in the proper starting position. If your hearing some strange noises and its not working, then the gears are probably badly stripped. You can contact the manufacturer and see if they can sell you some spare parts or direct you to someone who can replace it. Though at this point simply replacing the unit may be less expensive.

Jul 26, 2011 | Zenith XBV243 DVD Player/VCR

2 Answers

Error e03, but there is no jammed paper


E, 0, 3
Paper Output Tray is closed / Paper jam


Summary
If the Paper Output Tray is closed, open it. The machine resumes printing.


If opening the Paper Output Tray does not resolve the problem, or if the tray was open to begin with, the paper may be jammed. Remove the jammed paper, reload paper properly in the printer, then press the Black or Color button.
E, 0, 3
Paper Output Tray is closed / Paper jam


Summary
If the Paper Output Tray is closed, open it. The machine resumes printing.


If opening the Paper Output Tray does not resolve the problem, or if the tray was open to begin with, the paper may be jammed. Remove the jammed paper, reload paper properly in the printer, then press the Black or Color button.
E, 0, 3
Paper Output Tray is closed / Paper jam


Summary
If the Paper Output Tray is closed, open it. The machine resumes printing.


If opening the Paper Output Tray does not resolve the problem, or if the tray was open to begin with, the paper may be jammed. Remove the jammed paper, reload paper properly in the printer, then press the Black or Color button.

Techbelkin

Nov 03, 2010 | Canon Pixma Mp250 Allinone Inkjet Photo...

1 Answer

HP 2200D Amber light keeps flashing! ..and nothing else


Hi,

Following are the reasons and its solution for amber light keeps flashing:

1. Toner have been empty.
Sol : Refill you toner.
2. Printer's paper tray do not close properly or paper in not in the tray.
Sol : Close the paper tray properly and keep some papers in the tray.
3. Any door of printer is open or not properly close.
Sol. : Check all the doors that is close properly or not.

If problem is still remaining then contact a professional to repair this printer.

Regards

Ashly

Feb 25, 2010 | HP LaserJet 2200D Printer

Not finding what you are looking for?
Jura Capresso Impressa F9 Espresso Machine Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jura Capresso Coffee Makers & Espresso Machines Experts

The Knight
The Knight

Level 3 Expert

74243 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Jura Capresso Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...