Question about Hotpoint Washing Machines

Open Question

Hotpoint wml720 wont start clicking by door

Helppppppppppppppppppppppppppppppp plzzzzzzzzzzzzzzzzzzx

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

murdozzz
  • 41 Answers

SOURCE: my Hotpoint WML540 wont start

This sound like the main control board has blown and this is due to the motor shorting out, if you isolate the power supply and remove the control panel you will be able to remove the pcb/module and inspect it for signs of burning or split tracks if you find this is the case usually it is cheaper to replace the machine than purchase a pcb and motor.

Regards

Ian

Posted on Apr 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My washing machine will not lock to wash i have replaced the locking mechanism assembly and the lock lid light just blinks and click near the computer board what els should i try please jelp


How to fix a washing machine door lock in a Hotpoint ...

? 4:21
https://www.youtube.com/watch?v=p14EEa4AYGM
Jun 4, 2010 - Uploaded by eSpares
For all your washing machine spare parts go to http://bit.ly/1828iPF In this video, ... How to fix a washing machine door lock in a Hotpoint washing machine ... How to open a washing machine door that won't open normally.

Door makes clicking noise and won't lock or start - Kenmore ...

https://www.ifixit.com/.../Door+makes+clicking+noise+and+won't+l...

iFixitOct 30, 2013 - Door or Lid Latch Assembly If the washer lid or door won't lock the lockand switch assembly might be defective. This is a very ... The Kenmore Elite HE3 is awashing machine by Kenmore. ... Preview my answer. Post my ...

washing machine wont work. the door will not lock to start ...

www.shopyourway.com > Manage My Life > Questions
Manage My Life. washing machine wont work. the door will not lock to start the cycle. all the lights still ... Kenmore HE3T front load washing machine will not start.

How to Fix Washer That Won't Start ' Washing Machine Repair

www.partselect.com/Repair/Washer/Will-Not-Start/
Read on to learn how easy it is to fix the washing machine yourself... ... found on front load washing machine is the door switch and the door lock and strike.

Jan 23, 2016 | Washing Machines

1 Answer

Hotpoint aquarius +WML720 tripping fuse box every time I switch it on any ideas please


You have a direct short in the wiring, if you open up the outer case and make sure its unplugged it should be very easy to visibly spot the burned wires or offending part. Most all of these parts can be had either locally or online and are usually straightforward to replace.

Jan 01, 2014 | Washing Machines

1 Answer

The start button on my hotpoint wt740 washing machine wont click on.


Hotpoint had a problem with a control panel design where if the start button is pushed too hard, it snaps off the panel. This is most likely cause but it might be a faulty door lock.

Dec 09, 2009 | Hotpoint Washing Machines

1 Answer

Door not clicking shut


I had the same problem. There is a spring on the catch mechanism that breaks. Replace this and it fiexes the fault.

Jan 12, 2009 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

Door wont open on my hotpoint aquarius washer/dryer


Turn the dryer dial to off, making sure you can hear it click off, wait 1 min, and then try door. If it will still not open then you may have faulty door lock, or a prob with the door handle.
Plz rate my solution.
Thanks.

Dec 29, 2008 | Hotpoint Aquarius WD63 Front Load...

1 Answer

Hotpoint WMA62 door will not lock


Sounds like the door lock switch has failed,normally they go bang when fail,they start the machines cycle so are important,when door is shut it should click,this engages a timer which keeps door locked switch is live at mains potential,cant be tested have to be replaced about 12 pounds cost,best for a tech unless you feel competent

Dec 13, 2008 | Hotpoint WMA64 Front Load Washer

1 Answer

Hotpoint Aquarius


I have a hotpoint aquarius washer/drier. I don't know if this will solve your problem but I know with mine, this almost always happens, the only way I can get it to start is by firmly pushing the door a few times around where the lock is, once I hear a little click inside it will start ok. I presume its because it wont start as it isn't registering that the door is closed, the only time it does not do this is if I literally slam the door really hard. Hope this helps you!

Sep 13, 2008 | Hotpoint Aquarius WF000 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

puggy666

Level 1 Expert

48 Answers

freddyfox

Level 2 Expert

236 Answers

ptpumpman

Level 3 Expert

407 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...