Question about Bunn Cuisinart Coffeemaker: Pour-Omatic Coffee Brewer ( O Matic)

Open Question

Adjust thermostat on vaculator coffee maker - Bunn Cuisinart Coffeemaker: Pour-Omatic Coffee Brewer ( O Matic)

Posted by on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Bunn coffee maker will not quit boiling the water in the tank, what is the solution?

It sounds like the thermostat needs to be change. it is located under the top of the unit. Should be on the left side under the lid. Visit this link to get an idea of the part..

Nov 22, 2014 | Bunn VPR Coffee Maker

1 Answer

My 8572 coffee maker drips hot water ,even when no water is added to the machine.This is making it difficult to know how much water is needed to brew a full pot.

I will assume that it is a pour over brewer from your statement, so the only thing that comes to mind is the thermostat not turning off the elements and the water is boiling and coming out the brew tube. You can try to adjust the thermostat first if that does not help then you might have to replace it.

May 15, 2011 | Bloomfield 8572 Coffee Maker

1 Answer

Hi I have a bunn commercial brewer. its a sh dbc brewer. the brewer keeps heating the water all thw way to 225 degrees and keeps going.

Sounds like the thermostat needs to be replaced adjusted or the probe to the thermostat is covered in scale, and it cannot read the temp correctly. Remove top panel and check probe, if fine no buildup, follow probe line to thermostat and set to a lower setting, if same problem replace thermostat.

Apr 02, 2011 | Bunn Dual SH DBC Coffee Maker

1 Answer

Have bunn A-10. want to adjust the temperature hotter. top comes off, cut cannot get next cover off. can you help me locate a thermostat adjuster. reply to thanks, john

This illustrated parts catalog should help you with removing the cover.

See page 6, item 6 to identify the thermostat assembly.

On page 10, the thermostat knob is identified as item 3.

Use the search function here to locate any parts you might need:

Feb 16, 2011 | Bunn A10 Coffee Maker

1 Answer

Adjust temperature higher, HOW?? Problem is reoccurring now every batch brewed.

Could be lime on thermostat probe.When unplugged remove probe and crack off lime deposits.To access ,remove top lid and loosen fill tube nut for fill basin.Take out basin and thermostat is underneath. Also check heating element or hi-limit.Ohm to check with a meter.

Jan 24, 2011 | Bunn VPR Coffee Maker

1 Answer

Fetco cbs-51h coffee maker not heating hot enough. turned thermostat all wasy up. coffee luke warm.

It can be the Temperature sensing probe, heating element or a loose/burned wire connection.
Adjusting the brew temperature is not going to help

Jan 17, 2011 | Coffee Makers & Espresso Machines

1 Answer

Bunn cwtf15 coffee isn't hot enough the coffee brews @115 degrees

Adjust the thermostat, located behind the front panel, there will be a knob, turn all the way on then back about 1/4 turn.

Dec 07, 2009 | Bunn CWTF 15-TS Coffee Maker

1 Answer

Water does not heat up have replaced limit thermostat and heating element

Check the other inline fuse on the element to the light, if you get resistance, then the problem is the adjustable thermostat.

Oct 09, 2009 | Bunn Automatic Coffee Brewer CWTF15 1

1 Answer

How can I adjust my boiler ? the water is only at 140 degres

The thermostat may have gone bad on your espresso machine.

Saeco parts and cleaning supplies:

Apr 19, 2007 | Saeco Classico Espresso Machine

Not finding what you are looking for?
Coffee Makers & Espresso Machines Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bunn Coffee Makers & Espresso Machines Experts

Kelley Hopper

Level 2 Expert

60 Answers

Jim Y
Jim Y

Level 2 Expert

338 Answers


Level 2 Expert

102 Answers

Are you a Bunn Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides