Question about Garden

Open Question

What is fuel mix ratio for a McCulloch wildcat 2.3ci 38cc

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

finance535
  • 1 Answer

SOURCE: pro mac 850 super cc rateing and fuel mix

ProMac 850 is 82cc capacity motor & Fuel mix is 25:1 - especially now that we only have unleaded... best to use BP Ultra 98 octane as these saws were designed to run on Super leaded fuel. I used to own a 797 Super (123cc motor)
Terry B

Posted on Jul 30, 2009

VtToolMan
  • 704 Answers

SOURCE: mcculloch 310 oil mix ratio

The proper gas/oil ratio is 50:1, that is 50 parts gas, to one part (2) cycle oil.

If you plan on leaving gas in the tank when not being used, I always recommend adding some gas stabilizer, such as Sta-bil, which makes starting the chain saw easier regardless of how long the fuel mix has been sitting in the tank or saw (up to 2 years according to Sta-bil label)

Hope you find this Very Helpful and best regards!

Posted on Sep 09, 2009

dontbother10
  • 2220 Answers

SOURCE: Gas, Oil Mix ratio for McCulloch Eager ******

Fuel/Oil Mixture

  1. Use a quality 2 cycle oil and mix it to the OIL supplier's recommended ratio. Today I use Stihl 2 cycle oil mixed @ 50:1 in a Pioneer that I purchased new in 1980. There are no gouges or scratches on the piston or cylinder and I have no carbon build up on the piston top. The manual (on stone tablets) recommends 24:1. Over the years the mixture has leaned from 24:1 (Saw Recommendation) to 28:1 (Lawn boy mower recommendation) to 32:1 (Oil provider 8oz/2gal - used for many years) and finally the last 5 (±) years 50:1 (Stihl 2.6oz/1gal)
  2. Most gas in the US of A contains ethanol; not good with chainsaws. Mix what you expect to use within a few months. Anything over 6 months old use up in a 4 cycle engine. HTH
    Lou

Posted on Sep 28, 2009

dontbother10
  • 2220 Answers

SOURCE: need an owners manual

Contact Us
All McCulloch Products
1 (800) 521-8559
Good luck with an Owner's Manual
Please have your saw within easy reach.

Posted on Oct 24, 2009

dontbother10
  • 2220 Answers

SOURCE: Did mcculloch manfacture the same piston rings for

McCulloch Manuals
Illustrated Parts Lists: (IPLs) are fairly simple. On the underside of McCulloch saws is a black and yellow tag; the upper number (“Power Mac 320” 600021H) is the model, below it a serial number (11-18555). These 2 numbers are combined to create an IPL number (“Power Mac 320” IPL number = 11-600021H). The IPL number can be used to find the correct IPL for every McCulloch parts supplier I’ve found. If the parts supplier only list part numbers the proper IPL is the source for the part number.
Operator’s Manuals: are much more difficult. I’ve dialed this number many times (Contact Us - All McCulloch Products 1 (800) 521-8559) and have yet to get a satisfactory response. Please try this! If enough of us try they will fix it! If unsuccessful with McCulloch try here:
Beg for manuals thread (ArboristSite - free to join). Please use the search function first, it has probably been asked and answered.
http://www.arboristsite.com/showthread.php?t=72322 HTH
Lou

Posted on Nov 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the fuel/oil mix for a mcculloch 14inch chainsaw 2.0 cib?


If you use newer synthetic oil it covers a broad range of fuel/oil ratios with one mix. it will allow you to use one fuel mix for all your 2cycle equipment


Aug 22, 2011 | McCulloch 16 Inch Gas Chain Saw MCC1635AK

2 Answers

Can anyone help with fuel mix and starting instructions for McCulloch 2214av chainsaw please


Ok, always use good quaility teo stroke oil, from a manufacturer who actually produces a chainsaw, ie Husqvarna/Stihl/Jonsered etc, all of these oils should be run at 50-1, avoid oil makes you have never heard of.
Starting instructions are as follows, switch the red ignition switch too on ( up ) depress the primmer bulb as many times as it takes to 3/4 fill the bulb ( you cannot flood the engine if you over prime, it is better to over prime ) pull the blue choke fully out, crank the engine until it fires once ( it will only fire once, do not continue to crank the engine after it first fires with the choke still out ) now push the choke fully back in, crank the engine until it fires up and runs on fast idle,now blip the throttle trigger to diss engage the fast idle position, the saw should now drop down to idle.
Regards

Jan 31, 2011 | McCulloch 16 In 4.5 Hp Electric Chainsaw...

1 Answer

What is the proper fuel mix for a mcculloch ms1635 chain saw?


between 32:1 and 40:1 - Manufacturer recommends 40:1 Ratio - EXAMPLE: "Mix 3.2 ounces of Poulan 2-cycle air cooled engine oil to one gallon of fresh unleaded gasoline to obtain the recommended 40:1 fuel to oil ratio."

Sep 02, 2010 | McCulloch Garden

1 Answer

Just bought a McCulloch 32cc, Mdoel 3214 from a pawn shop with no manual. Does it require mixing oil with the gas and if so what ratio?


Fuel requires 2-cycle oil be added, bar oil is straight from the container.

Oil Mix Ratio:
The following ratios have been recommended for the last 10-15 years.
Dolmar, Echo, Efco, Homelite, Husqvarna, Jonsered, Makita, Oleo-Mac, Red Max, Ryobi, Shindaiwa, Solo, Spear & Jackson, Stihl & Tanaka; all recommend 50:1.
1 gallon of premium fuel to 2.6 ounces of quality 2-cycle oil.
4 liters of premium fuel to 80 milliliters of quality 2-cycle oil.
McCulloch, Poulan & Wen; recommend 40:1.
1 gallon of premium fuel to 3.2 ounces of quality 2-cycle oil.
4 liters of premium fuel to 100 milliliters of quality 2-cycle oil.
Chinese chainsaws recommend 25:1.

If you have more questions or need additional help please reply below and I will get back to you. HTH & Good Luck.
Lou
Thank You for using FixYa.

Aug 06, 2010 | McCulloch Garden

1 Answer

Model PM374 mixture ratio please


Hello George:
I cannot find an OM for your saw. I did find 3 IPLs the oldest being 1993. I have 2 McCulloch (1983 & 87) saws both older than yours and their OMs recommend the current mix ratio of 40:1
Oil Mix Ratio:
The following ratios have been recommended for the last 10-15 years.
Dolmar, Echo, Efco, Homelite, Husqvarna, Jonsered, Makita, Oleo-Mac, Red Max, Ryobi, Shindaiwa, Solo, Spear & Jackson, Stihl & Tanaka; all recommend 50:1.
1 gallon of premium fuel to 2.6 ounces of quality 2-cycle oil.
4 liters of premium fuel to 80 milliliters of quality 2-cycle oil.
McCulloch, Poulan & Wen; recommend 40:1.
1 gallon of premium fuel to 3.2 ounces of quality 2-cycle oil.
4 liters of premium fuel to 100 milliliters of quality 2-cycle oil.
Chinese chainsaws recommend 25:1.

If you have more questions or need additional help please reply below and I will get back to you. HTH & Good Luck.
Lou
Thank You for using FixYa.

May 10, 2010 | McCulloch Garden

2 Answers

Gas, Oil Mix ratio for McCulloch Eager ******


Fuel/Oil Mixture
  1. Use a quality 2 cycle oil and mix it to the OIL supplier's recommended ratio. Today I use Stihl 2 cycle oil mixed @ 50:1 in a Pioneer that I purchased new in 1980. There are no gouges or scratches on the piston or cylinder and I have no carbon build up on the piston top. The manual (on stone tablets) recommends 24:1. Over the years the mixture has leaned from 24:1 (Saw Recommendation) to 28:1 (Lawn boy mower recommendation) to 32:1 (Oil provider 8oz/2gal - used for many years) and finally the last 5 (±) years 50:1 (Stihl 2.6oz/1gal)
  2. Most gas in the US of A contains ethanol; not good with chainsaws. Mix what you expect to use within a few months. Anything over 6 months old use up in a 4 cycle engine. HTH
    Lou

Sep 28, 2009 | McCulloch 16 In 4.5 Hp Electric Chainsaw...

1 Answer

Mcculloch 310 oil mix ratio


The proper gas/oil ratio is 50:1, that is 50 parts gas, to one part (2) cycle oil.

If you plan on leaving gas in the tank when not being used, I always recommend adding some gas stabilizer, such as Sta-bil, which makes starting the chain saw easier regardless of how long the fuel mix has been sitting in the tank or saw (up to 2 years according to Sta-bil label)

Hope you find this Very Helpful and best regards!

Sep 09, 2009 | McCulloch 16 In 4.5 Hp Electric Chainsaw...

1 Answer

I have a McCulloch Bearcat. It sat all summer. I


Did you remove the old fuel?
Did you refuel it with a fresh oil/gas mix? Mixed to the oil suppliers recommended ratio.
The fuel that sat all summer probably contains ethanol. Ethanol draws moisture, moisture and the oil suspended in the fuel don't mix. The old fuel can be used in a 4 cycle engine. Try refueling with a fresh mix if that doesn't work we need to investigate further.
Lou

Sep 05, 2009 | McCulloch Garden

1 Answer

Gas to oil ratio for a McCulloch power mac 310


When in doubt 40:1 is the always safe mix for any 2 stroke, synthetic oils 50+:1 use there recommendations. Always use the same(premium quality) 2 stroke oil to avoid fuel issues.

Mar 17, 2009 | McCulloch Garden

Not finding what you are looking for?
Garden Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2475 Answers

john h

Level 3 Expert

11057 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...