Sanyo PLC-XL50, not turning on - Sanyo PLC-XL50 Projector

Sanyo PLC XL50 Projector Filter Cleaning Guide
If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

This is an indicator stating the lamp is bad and cannot power the projectors backlight. You should replace this prior to any additional powering of the unit.

como resetar lampada de sanyo xu300

you need to activate the external monitor port on your laptop.

Hi There,

I Have a plc-sw35, Gave me many issues (switching off etc..) Ive managed to repair it, and made the manual available. http://www.entwan.netau.net/1_8_Repair-Schematics.html

My repair story is there also.

i had a sanyo plc sw30 wich had the same problem and it turned out to be the bulb replaced it with new one and this seemed to solve the problem. Theres a few places to get new ones but they are not cheap looking at between £150 to £180 hope this helps

Clear the air flow and replace or clean air filters. that will solve.

This is Sanyo part number 610-309-2706

This should help you according to Sanyo support.

http://support.sanyo-service.com/file.aspx?token=8ad3512e-39b0-4054-9a07-f30a0ee9b1fe&file=PLC-XU35_Lamp_replacement.pdf