Question about Jet Tech Systems 24 in. 737 Free-standing Dishwasher

1 Answer

After 20 mins water temp still not at 150 on my jet-tech 737 dushwasher.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 25 Answers

The reason the temperature are going up is the heating system is defective. The thermostat on the booster (rinse) is not satisfied. First thing to verify is the contactor that is activated by the rinse thermostat. Often one of the wires on the contactor will burn.

Posted on Dec 29, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Not heating up to temp of 150 for wash cycle


The 737, like most Jet=Tech models, requires to be drain empty at least once a day. If the unit is empty and it is started, it will take approximately 30 minutes for the machine to be ready. Which means, the unit will fill and then heat up both booster tank first and then wash tank. If after all that the wash temperature is not up to 150f then the wash thermostat needs to be either calibrated or replaced if the wash element is in good condition. It is assumed here that the booster temperature is reaching 180F.
Search by part number or description Search by part number or description

Nov 20, 2013 | Jet Tech Systems 24 in. 737 Free-standing...

1 Answer

Manual


Those machines use the incoming water temp to start and then boost it, so check the incoming water temp. If it is too low then you need to increase it. It could be the heater that is not working but you need to check the incoming water temp first.

Jun 06, 2013 | Jet Tech Systems 24 in. F18DP...

1 Answer

Jets stuf off on their own after about 20 - 30 minutes


This is normal for jets on hot tubs/whirlpools for the jets to shut off after 20 minutes. This is a safety feature to prevent overheating of the water. When jets are running, the hot tubs are constantly heating and can elevate to dangerously high temperatures excess of 110 degrees causing scalds that you would not even know are happening. Your body temperature acclimates to the climbing temps and you dont realize it is that hot. It also helps prevent you from falling asleep and not paying attention to the temps in the tubs. Sorry, but I think you are going to have to restart the jets after each cycle. It is a safety feature that can't be bypassed or circumvented. Good luck and happy tubbing
Dave K

Aug 29, 2009 | Home

1 Answer

Dishwasher will not stop washing


The problem is the pressostat which is part of the water level system. Either the pressostat needs adjustment or replacement. the air trap at the back of the unit in the sump area may be loose or broken, this should be inspected. refer to http://www.mvpgroupcorp.com/jettech/737_exp_view.pdf .

Jan 15, 2009 | Jet Tech Systems 24 in. 737 Free-standing...

1 Answer

Water to dishwasher not hot enough


The 737 model could run on even lower temperature (80F). Given time, the unit will heat up the water. the trick is to give it time.

That model is made for commercial use, not really for residential. It will not fully drain every cycles. The important thing to keep in mind is to empty the dishwasher (turn it off, pull the stand-pipe out, and drain) every night and left empty. When you want to use the unit, put the plug back in and turn it on, wait 20 to 30 minutes and it should be ready.

Robert Marsolais

Jul 28, 2008 | Jet Tech Systems 24 in. 737 Free-standing...

1 Answer

Jet tech washer 737 dp


Ouch.

Before you start changing all sort of parts, correct your problem with the wires. You may have to change most of them, depending on how bad the chemical burned tru them.

A good cleaning is required because that soap is going to continue chewing on those wires.

You're right about a short causing other component failure. But first repair those wires

Robert Marsolais

Dec 19, 2007 | Jet Tech Systems 24 in. 737 Free-standing...

Not finding what you are looking for?
Jet Tech Systems 24 in. 737 Free-standing Dishwasher Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jet Tech Systems Dishwashers Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Brad Brown

Level 3 Expert

15639 Answers

ray gallant

Level 3 Expert

44312 Answers

Are you a Jet Tech Systems Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...