Question about Whirlpool GHW9400SU Front Load Stacked Washer / Dryer

Open Question

Whirlpool front loader washer parts PS1486161

HOW CAN I FIND THIS DOOR HANDLE?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
rickzilla
  • 706 Answers

SOURCE: Whirlpool Duet front loading washer - handle broke off

Hello elgatogordo,
You should be able to identify the part you need as well as order it from this website.. here is the link.. http://www.pcappliancerepair.com/model-display.php

Hope this helps..
Regards,
Rick

Posted on Dec 04, 2008

Ad
  • 1294 Answers

SOURCE: washer is stuck on control locked

Press & hold 'end of cycle' at right of panel for 3 seconds. The light will come off.

And rate me plz....................

Posted on Mar 27, 2009

  • 1 Answer

SOURCE: Door locked on compact Whirlpool front-load washer

This worked for me. I turned off the washer and hit the area on the washer directly to the right of the door handle (not hard enough to break something or cause a dent). It popped right open.

Posted on Sep 30, 2009

  • 119 Answers

SOURCE: How do i clean a filter of a whirlpool awm 5080 front loader

If you are talking about the drain pump strainer, you need to remove the lower front panel. should be 3 screws on the bottom facing forward. Once you have that off, the pump strainer is almost in the center, facing you. unscrew it counterclockwise to remove.

Posted on Apr 26, 2010

jsrock516
  • 5911 Answers

SOURCE: Bellow ##W10111435 whirlpool washer WFW8300SW02.

The following link explains step-by-step how to change the door bellow on a Whirlpool Duet front loader:

http://www.fixya.com/support/r3574186-installing_a_door_bellow_on_a_front_load

If you have any questions about this repair, please post back and let me know. If the link does not take you directly to the instructions I provided, copy and paste the link to your web browser. I hope you find this information helpful.

Posted on Apr 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Door won't unlock whirlpool wFs1073dd front loader


If it has water in the the machine, it has a safety feature that will not allow the door to unlock. There is a manual release but you have to take the bottom kick plate off. Unplug the washer. Then reach up on the right side of the washer and you will feel a plastic lever about the size and shape of a nickel pull down on this lever to release the door. If it full of water i would clean the pump first to get rid of the water. you can clean the pump by taking off the kick plate and you will see a pump with a lid with a handle on it. you can unscrew this and it will have a trap attached to the back of the lid. pull the trap out and clean any debris out then screw it back in. make sure to have buckets and towels handy once you unscrew the lid any water in the machine will fly out at you. the easiest way to avoid this is to clamp the hoses that go to the pump.

Aug 24, 2012 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Front door leaks


The door gasket is bad this page will help http://www.appliance-repair-it.com/GE-front-loader-washer.html

I know the page says GE front loader but replacing the door gasket is the same.

Oct 05, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Bellow ##W10111435 whirlpool washer WFW8300SW02.


The following link explains step-by-step how to change the door bellow on a Whirlpool Duet front loader:

http://www.fixya.com/support/r3574186-installing_a_door_bellow_on_a_front_load

If you have any questions about this repair, please post back and let me know. If the link does not take you directly to the instructions I provided, copy and paste the link to your web browser. I hope you find this information helpful.

Apr 28, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Maytag 1275 front loader. plastic inside part of door handle snapped. can I remove the door handle and get a replacement. liz


Hi Liz, I to have the same problem, a design fault! It was $35AU for the part, I have replaced it but the door can't close properly. Still working on it. Joan

Sep 30, 2009 | Maytag Neptune FAV6800A Top Load Washer

2 Answers

Door locked on compact Whirlpool front-load washer


This worked for me. I turned off the washer and hit the area on the washer directly to the right of the door handle (not hard enough to break something or cause a dent). It popped right open.

Apr 09, 2009 | Whirlpool WFC7500VW Washer

4 Answers

Whirlpool Duet front loading washer - handle broke off


Replacement handles can be found at amazon... click here and take a look Modern Shower Doors at Amazing Prices. I hope this was helpful. Cheers

Dec 04, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool washine machine #AWM 3082 - door wont open


Try to unplug the unit for five minutes, then plug back in. Try to start a load, as soon as the door locks agian, hit cancel. That will sometimes let you get back in. Im not sure if this is a top loader or front loader, but there is a way (if its a front loader) to remove the bottom front kick plate, then you have to reach up the inside to the door latch assm, on the bottom of that is a small round handle, pull it straight down, and the door will unlock. If its a top loader (i.e. Cabrio, Oasis, Etc), you can open the top only by unclipping the top from the base. You can do this by putting a putty knife in between the top and cabinet, then finding the clips, pushing them in and lfting, you can get your stuff out that way.

Nov 16, 2008 | Whirlpool LHW0050PQ Front Load Washer

1 Answer

Whirlpool replacement door handle and spring


Since this has received no response, I am closing it off my list. If you need any other help drop me a note back.

Jul 18, 2008 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Whirlpool GHW9400SU Front Load Stacked Washer / Dryer Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2183 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...