Help me log in my account

Ad

Are you using google chrome >???

You may be prevented from accessing your Gmail account in the Google Chrome browser for a number of reasons.

Although both programs are Google products, there may be a firewall, browser or software conflict causing the Gmail page not to load.

Going through a few basic troubleshooting steps can usually clear up the matter and get you back into your Gmail account.

Click the "Wrench" icon at the top-right corner of the browser window and select "Options" from the menu.

Go to the "Under the Hood" section.

Click the "Clear Browsing Data" button near the top of the options page.

A popup window appears.

Check the boxes for "Empty the Cache" and "Delete Cookies and Other Site and Plug-in Data."

Change the "Obliterate the Following Items From" to "The Beginning of Time" option, then click the "Clear Browsing Data" button.

Clearing out the browser's stored files often helps to make websites load properly and perform better.

Check your firewall settings.

Click the "Start" button and type "Firewall" into the search box.

Click "Windows Firewall." In the application, click the "Allow a Program or Feature Through Windows Firewall" from the left column.

Check the box for "Chrome.exe" from the program list.

When done, click the "OK" button.

You may have other firewall software installed, so check those settings if necessary to allow Google Chrome full access to the Internet.

Disable browser extensions. Periodically, an extension may cause a conflict in the browser and prevent you from loading Gmail properly or entirely.

Click the "Wrench" icon at the upper-right corner of the window, go to the "Tools" menu and select "Extensions."

Click the "Disable" link for any Gmail-specific extensions, such as "Better Gmail" or "Google Mail Checker."

If Gmail still doesn't load, temporarily disable all extensions one by one until it works.

Log into Gmail using a non-secure connection.

For example, if you normally use the secure connection or "https" prefix, then you want to type "http://mail.google.com/mail" for the website address.

If you already use the non-secure connection, try using the secure connection by typing "https://mail.google.com/mail" instead for the address.

Try a different browser other than Google Chrome to see if the problem lies with Gmail.

The Gmail servers may be experiencing difficulties for a wide number of users or just specifically your account. Sometimes troubleshooting the browser or firewall software will not correct the issue.

If the problem still persists on a different browser or computer system, then wait a while before attempting to access Gmail again.

The loading issue may be resolved by then.

https://mail.google.com/support/bin/answer.py?answer=46346

**https://mail.google.com/support/bin/answer.py?answer=8767**

Posted on Nov 20, 2013

Ad

Hi,

a 6ya expert can help you resolve that issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

New users get **2 Free calls** (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).

click here to download the app (for users in the US for now) and get all the help you need.

Goodluck!

Posted on Jan 02, 2017

Ad

Get a new password at web site.

Sep 20, 2017 | Yahoo Computers & Internet

https://www.facebook.com/help/contact/259497704121855

Feb 11, 2015 | Facebook Social Network

Just follow this Guidelines

GPRS SETTINGS

1. Go to Menu>Choose Settings>Connectivity

2. Go to Data Accounts

3. Create New Account. GPRS/ PS Data

Account Name: MyGlobe GPRS

APN: www.globe.com.ph

4. Save Account

5. Go to Browser, Slect Options and click Internet Settings

6. Add New Profile

Name: MyGlobe WAP

Connect Using: MyGlobe GPRS

IP ADDRESS: 203.177.042.214

ADVANCED

Chg. Homepage: MyGlobe GPRS

Address: http://www.globe.com.ph/globe.asp

Save Profile

MyGlobe Internet Settings

1. Go to Menu>Choose Settings>Connectivity

2. Go to Data Accounts

3. Create New Account. GPRS/ PS Data

Account Name: MyGlobe INTERNET

APN: internet.globe.com.ph

4. Save Account

MyGlobe MMS Settings

1. Go to Menu>Choose Settings>Connectivity

2. Go to Data Accounts

3. Create New Account. GPRS/ PS Data

Account Name: MyGlobe MMS

APN: mms.globe.com.ph

4. Save Account

5. Go to Messages>Picture Messages>Option>Internet Profile

6. Create New Profile

Name: MyGlobe MMS

Connect Using: MyGlobe MMS

IP ADDRESS: 203.177.042.214

7. Save Profile

8. Select the profile MyGlobe MMS in Internet Profile

9. Save Settings

10. Go to Messages>Picture Messages >Options

11. Edit Message Server

http://192.40.100.22:100.21/mmsc

12. From Message Settings, make your Internet Profile: MyGlobe MMS

Hope it helps...

GPRS SETTINGS

1. Go to Menu>Choose Settings>Connectivity

2. Go to Data Accounts

3. Create New Account. GPRS/ PS Data

Account Name: MyGlobe GPRS

APN: www.globe.com.ph

4. Save Account

5. Go to Browser, Slect Options and click Internet Settings

6. Add New Profile

Name: MyGlobe WAP

Connect Using: MyGlobe GPRS

IP ADDRESS: 203.177.042.214

ADVANCED

Chg. Homepage: MyGlobe GPRS

Address: http://www.globe.com.ph/globe.asp

Save Profile

MyGlobe Internet Settings

1. Go to Menu>Choose Settings>Connectivity

2. Go to Data Accounts

3. Create New Account. GPRS/ PS Data

Account Name: MyGlobe INTERNET

APN: internet.globe.com.ph

4. Save Account

MyGlobe MMS Settings

1. Go to Menu>Choose Settings>Connectivity

2. Go to Data Accounts

3. Create New Account. GPRS/ PS Data

Account Name: MyGlobe MMS

APN: mms.globe.com.ph

4. Save Account

5. Go to Messages>Picture Messages>Option>Internet Profile

6. Create New Profile

Name: MyGlobe MMS

Connect Using: MyGlobe MMS

IP ADDRESS: 203.177.042.214

7. Save Profile

8. Select the profile MyGlobe MMS in Internet Profile

9. Save Settings

10. Go to Messages>Picture Messages >Options

11. Edit Message Server

http://192.40.100.22:100.21/mmsc

12. From Message Settings, make your Internet Profile: MyGlobe MMS

Hope it helps...

Jul 15, 2011 | Sony Ericsson XPERIA X8 Cell Phone

You calculate the pH with the relation

pH=-log(c) where c is the value of concentration in mol/L.

ex: c[H+]= 3.57x10^(-6)

pH: (-) [LOG] 3.57 [2nd][EE] [(-)] 6 [ ) ]

Here you have 2 change sign key press [(-)]

If you have the pH, and want to calculate the concentration that yields that value of the pH you proceed as follows

c= 10^(-pH)

Ex pH=8.23

c: [2nd][LOG] [(-) 8.23 [)]

General shortcut.

If concentration is of the form c[H+]= 1*10^(-a) where a is an integer between 0 and 14, the pH is equal to the positive value of exponent.

Ex:c[H+]=1x10^(-5) Mol/L then the pH is just the positive value of the exponent, ie 5 because pH=-log(1.x10^-5) =- log1 -log(10^-5)=0 -(-5)=5

Above I use the rule log(axb)=log(a)+log(b) , the rule log(a^b) = b*log(a)and the facts that log(1)=0 and log(10)=1, the last being true if log stands for log in base 10.

pH=-log(c) where c is the value of concentration in mol/L.

ex: c[H+]= 3.57x10^(-6)

pH: (-) [LOG] 3.57 [2nd][EE] [(-)] 6 [ ) ]

Here you have 2 change sign key press [(-)]

If you have the pH, and want to calculate the concentration that yields that value of the pH you proceed as follows

c= 10^(-pH)

Ex pH=8.23

c: [2nd][LOG] [(-) 8.23 [)]

General shortcut.

If concentration is of the form c[H+]= 1*10^(-a) where a is an integer between 0 and 14, the pH is equal to the positive value of exponent.

Ex:c[H+]=1x10^(-5) Mol/L then the pH is just the positive value of the exponent, ie 5 because pH=-log(1.x10^-5) =- log1 -log(10^-5)=0 -(-5)=5

Above I use the rule log(axb)=log(a)+log(b) , the rule log(a^b) = b*log(a)and the facts that log(1)=0 and log(10)=1, the last being true if log stands for log in base 10.

May 17, 2011 | Texas Instruments TI-30XA Calculator

try log in on your fb account

just activate https on your fb account(",)

-->account settings

--->**Secure Browsing (https)-->change**

**---->put check Browse Facebook on a secure connection (https) whenever possible**

**then save**

**output:**

**
Account Security
changehide
Set up secure browsing (https) and login alerts
log out---then log-in
I hope it will help you.....
myfb: marlonlumongsod@yahoo.com.ph
**

just activate https on your fb account(",)

-->account settings

--->

Mar 22, 2011 | Facebook Social Network

Feb 07, 2011 | Facebook Social Network

Juan,

The .ph is an abbreviation for the Phillipines. This is done in most, if not all, foreign countries. For example in the United Kingdom you would get an email address of yahoo.com.uk. Hope this helps.

By the way, I sent a test email using just .yahoo.com to see if it still goes through. if it does, you can use just yahoo.com without any problems. Yahoo will continue to use .ph for accounts in the Phillipines.

Thanks for using Fixya.

The .ph is an abbreviation for the Phillipines. This is done in most, if not all, foreign countries. For example in the United Kingdom you would get an email address of yahoo.com.uk. Hope this helps.

By the way, I sent a test email using just .yahoo.com to see if it still goes through. if it does, you can use just yahoo.com without any problems. Yahoo will continue to use .ph for accounts in the Phillipines.

Thanks for using Fixya.

May 24, 2010 | Yahoo Mail

You calculate the pH with the relation

pH=-log(c) where c is the value of concentration in mol/L.

ex: c[H+]= 3.57x10^(-6)

pH: (-) [LOG] 3.57 [2nd][EE] [(-)] 6 [ ) ]

Here you have 2 change sign key press [(-)]

If you have the pH, and want to calculate the concentration that yields that value of the pH you proceed as follows

c= 10^(-pH)

Ex pH=8.23

c: [2nd][LOG] [(-) 8.23 [)]

General shortcut.

If concentration is of the form c[H+]= 1*10^(-a) where a is an integer between 0 and 14, the pH is equal to the positive value of exponent.

Ex:c[H+]=1x10^(-5) Mol/L then the pH is just the positive value of the exponent, ie 5 because pH=-log(1.x10^-5) =- log1 -log(10^-5)=0 -(-5)=5

Above I use the rule log(axb)=log(a)+log(b) , the rule log(a^b) = b*log(a)and the facts that log(1)=0 and log(10)=1, the last being true if log stands for log in base 10.

pH=-log(c) where c is the value of concentration in mol/L.

ex: c[H+]= 3.57x10^(-6)

pH: (-) [LOG] 3.57 [2nd][EE] [(-)] 6 [ ) ]

Here you have 2 change sign key press [(-)]

If you have the pH, and want to calculate the concentration that yields that value of the pH you proceed as follows

c= 10^(-pH)

Ex pH=8.23

c: [2nd][LOG] [(-) 8.23 [)]

General shortcut.

If concentration is of the form c[H+]= 1*10^(-a) where a is an integer between 0 and 14, the pH is equal to the positive value of exponent.

Ex:c[H+]=1x10^(-5) Mol/L then the pH is just the positive value of the exponent, ie 5 because pH=-log(1.x10^-5) =- log1 -log(10^-5)=0 -(-5)=5

Above I use the rule log(axb)=log(a)+log(b) , the rule log(a^b) = b*log(a)and the facts that log(1)=0 and log(10)=1, the last being true if log stands for log in base 10.

May 20, 2010 | Texas Instruments TI-30XA Calculator

Hello,

To use the log function press [LOG] enter the number, close the right parenthesis and press [ENTER]

[LOG] 1 [ ) ] [ENTER] gives 0.

I have a hunch your problem is not the syntax of the log function on this calculator, but the calculation of the pH from the concentration or the calculation of a concentration from the pH. So I am inserting a copy of a previous post on the question. Use it as an exemple.

Let y=10^(x) 10 to the power of x

Take the log of both tems of the equality. You get**log(y)=log[10^(x)]** where I used square brackets for clarity. But from the general properties of logarithms

**log(b^(a)) = a*log(b)**

**
**

Applied to our expression above log(10^x)=x*log10

But since we are using log as log in base 10, log_10(10)=1 so log(y)=x

We thus have two equivalent relations

**y=10^x <----> x=log(y) **The double arrow stands for equivalence.

If**y is the log of x**, then **x is the antilog of y**

Your question: With log_10 standing for logarithm in base 10

**pH=-log_10(c)** where c= concentration. Then **log_10(c)=-pH**

The equivalence above translates as

log_10(c)=-pH is equivalent to**c=10^(-pH)**

The concentartion corresponding to a pH of 7.41 is

c=10^(-7.41)=3.89x10^(-8)

Hope it helps

To use the log function press [LOG] enter the number, close the right parenthesis and press [ENTER]

[LOG] 1 [ ) ] [ENTER] gives 0.

I have a hunch your problem is not the syntax of the log function on this calculator, but the calculation of the pH from the concentration or the calculation of a concentration from the pH. So I am inserting a copy of a previous post on the question. Use it as an exemple.

Let y=10^(x) 10 to the power of x

Take the log of both tems of the equality. You get

But since we are using log as log in base 10, log_10(10)=1 so log(y)=x

We thus have two equivalent relations

If

Your question: With log_10 standing for logarithm in base 10

The equivalence above translates as

log_10(c)=-pH is equivalent to

The concentartion corresponding to a pH of 7.41 is

c=10^(-7.41)=3.89x10^(-8)

Hope it helps

Oct 28, 2009 | Texas Instruments TI-30 XIIS Calculator

Hello,

Let y=10^(x) 10 to the power of x

Take the log of both tems of the equality. You get

log(y)=log[10^(x)] where I used square brackets for clarity. But from the general properties of logarithms

log(b^(a)) = a*log(b)

Applied to our expression above

log(10^x)=x*log10

But since we are using log as log in base 10, log_10(10)=1

so

log(y)=x

We thus have two equivalent relations

**y=10^x <----> x=log(y) **The double arrow stands for equivalence.

If**y is the log of x**, then **x is the antilog of y**

Your question: With log_10 standing for logarith in base 10

pH=-log_10(c) c= concentration

Then log_10(c)=-pH the equivalence above translates as

log_10(c)=-pH is equivalent to c=10^(-pH)

The concentartion corresponding to a pH of 7.41 is

c=10^(-7.41)=3.89x10^(-8)

You enter it as follows

10[^]7.41[(-)][ENTER/=]

Hope it helps

Let y=10^(x) 10 to the power of x

Take the log of both tems of the equality. You get

log(y)=log[10^(x)] where I used square brackets for clarity. But from the general properties of logarithms

log(b^(a)) = a*log(b)

Applied to our expression above

log(10^x)=x*log10

But since we are using log as log in base 10, log_10(10)=1

so

log(y)=x

We thus have two equivalent relations

If

Your question: With log_10 standing for logarith in base 10

pH=-log_10(c) c= concentration

Then log_10(c)=-pH the equivalence above translates as

log_10(c)=-pH is equivalent to c=10^(-pH)

The concentartion corresponding to a pH of 7.41 is

c=10^(-7.41)=3.89x10^(-8)

You enter it as follows

10[^]7.41[(-)][ENTER/=]

Hope it helps

Aug 09, 2009 | Sharp EL-531VB Calculator

Apr 10, 2017 | Google Gmail

Mar 12, 2017 | Google Gmail

Mar 09, 2017 | Google Gmail

57 people viewed this question

Usually answered in minutes!

×