Question about Baby Gear

1 Answer

How do i fix a fisher price power wheels jeep

. It was rumning fine now won't go. Has a new 12v battery fully charged but won't go any more

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

If you have a volt meter, switch the volt meter to 12v, locate the motor in the back wheels and if you can see where the wires connect to the motor touch the terminals of the volt meter to the two connections and turn on the power wheels press the power pedal and see if you get a reading of 12v. If you can't touch the wire or where the wire connects try disconnecting the wires and testing it that way. If you have 12v at the motor then it seems the motor is shot. There should be two motors one fit each wheel and its unlikely that they would both go. If you don't have power at the motor try following the wires to the pedal and also the forward reverse switch. Test these in a similar fashion. Hope that helps

Posted on Nov 21, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My grandaughter's Fisher Price Barbie jeep is running slow. I have charged the battery twice and it doesn't make a difference. How can I check to make sure it isn't a bad charger before


Test the charger with a ohm meter, or you could take the vehicle to a Power Wheels service station, they can test the battery for you to see if it is good.



You can find your closest service center here: http://service.mattel.com/us/powerwheels_info.asp

If you end up needing a replacement battery or charger they can be found here: http://www.mendingshed.com/powwheelbat.html

Let us know if you need any more help.

Thank you,

Colleen
Customer Service
MendingShed.com
800-339-9297

Mar 20, 2013 | Fisher Price Power Wheels Cadillac...

1 Answer

We have a power wheels Mercedes and have charged it but it won't start


check the battery with a multimeter and make sure it is showing at least 12 volts

Jan 01, 2013 | Fisher Price Fisher Power wheels Cadillac...

1 Answer

Have the STX Vipor electric car. Fully charged but won't go, just hear clicking noise.


If this was a real car this could be anything from anti-theft to a blown battery. Being as its a power wheels it would probably be the battery is ruined because it was charged sitting on concrete bare. Which will quickly destroy a battery. You may have to buy a new battery. The only other thing I can think of to check is if the motor is ruined powering the wheels. Which will be a much more expensive fix. Hope this helps:)

Sep 20, 2012 | Fisher Price Power Wheels Rechargeable...

1 Answer

After a year in storage, jeep won't work.


the radio runs off of a seperate battery source, so that wouldn't have any effect on this, i would first of all check the battery and charger with a multimeter and make sure that they are showing the correct voltage, if its a 12v battery make sure that they are showing at least 12 volts, if its a 6v battery make sure that its showing at least 6v

Jun 06, 2012 | Fisher Price Power Wheels Barbie Jeep

1 Answer

Charging a fisher price power wheels


nope, way to many amps, could cause it to explode, you can get a replacement charger off of ebay for about $6 delivered

Apr 29, 2012 | Fisher Price Fisher Power Wheels Jeep...

1 Answer

We have a Barbie jeep and other power wheels vehicles. They all seem to be having the same problem - they won't run! We bought a new battery and one of the cars will run for a short time. The others...


Most auto parts store carry a load meter that will check the health of the battery. Go through the jeep first however and check that all connections are good and no wires are touching each other which would cause a dead short and drain batteries. That includes the speed pedal.

Apr 15, 2017 | Fisher Price Power Wheels Barbie Jeep

1 Answer

I have a power wheel price fisher charger and i like tu use it to charge a peg perego battery i have power wheels fisher-price 12v and i need the conection for a peg-perego 12v. Thank you,


hi, you will have change the adapter on the charger or the battery. do you have a peg charger thats not working? if so simply cut the connector off and splice it onto the power wheels charger. the chargers are simply a ac adapter so the only real difference is the connection points. get a cheap volt meter at harbor freight (under $5) and make sure you connect the + and - wires correctly, failure to do so will blow the fuse on the battery and maybe destroy the adapter. from your question im thinking you dont have the peg connector so can find those for sale on ebay or on http://www.modifiedpowerwheels.com . good luck!

Nov 16, 2010 | Peg Perego John Deere Gator HPX Ride on...

Not finding what you are looking for?
Baby Gear Logo

Related Topics:

423 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baby Gear Experts

Dorel UK
Dorel UK

Level 3 Expert

1629 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...