Question about Televison & Video

1 Answer

Dish 6.3 remote code for Samsung HT-X70 DVD/receiver

I am trying to figure out how to program my Samsung DVD/receiver (HT-X70) into my dish network 6.3 remote. I know the four digit code for it for a universal remote but Dish codes are three digits. Please help! Thanks!

Posted by on

  • spoonlips Dec 14, 2007

    I can't find the four digit remote code! What is it?!

  • Anonymous Dec 29, 2008

    I need a remote code for similar setup. ht-q70.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 56 Answers

You will have to use the AUX button to program it to . Press AUX till lights light up then enter 4 digit code (if you have a 3 digit code use 1 as the first number) then press pund. And your good to go howevetr the only functions that may work is powere on an off.

Posted on Nov 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Auto program dish remote 21.0 IR/UHF Pro to Epic Sound Receiver


DD Cox,

I can definitely provide more information. Without knowing the model of the sound system, I am unable to provide specific codes. Below I will include a link to lookup codes, as well as the steps to address the remote.

Link: http://www.mydish.com/support/apps/remotecodes.aspx

Addressing Remote to DVD:

1.) Press and hold the clear AUX button until all mode lights light up.
2.) Release and AUX light will be blinking.
3.) Press 2 and enter the code. (Example: If the code is 639, enter 2639)
4.) Press pound (#)
5.) Try functions (Power, Volume, etc..) and see if it is working.
6.) If no function, repeat steps 1-4 with another code.

Let me know if you have any other questions!

Tommy Faust
DISH Social Media Representative

Jan 22, 2013 | DISH Network IR Remote Control

1 Answer

My remote will not turn the tv on or adjust the sound, it will change channels


First, try pressing TV on the remote, check if that solves the problem. Then press Sat and try the TV power button again. If the remote previously controlled the TV, you lost the code for the TV. If you have your Dish Network manual, check if you wrote down the code when it was originally programmed. Which specific remote/receiver do you have? The programming directions and code lists are available here: http://www.dishnetwork.com/supportsection/remote-setup . You can also scan all of the codes to find the correct one: see http://www.dishnetwork.com/SupportSection/power-scan-instructions . Additional remote/receiver manuals are here: http://www.dishnetwork.com/SupportSection/manuals .

The direct coding procedure for the Dish remote that I have is: while facing the TV to be controlled (after adjusting the key for TV1/TV2 in a multiple TV system), press and hold TV until all four indicators light up. Then enter the 3 digit code. Press and release the # key. Then see if the code TV powers off when you press Power. Then press Sat and check if the TV power button works. Try additional codes if the TV doesn't respond.

If you recently got a new TV and you tried to program the remote for your TV, your dish remote may not have the code you need. (Most universal remotes are limited to codes for devices released 6 months or more before the remote was programmed.) In that case, you should use the TV remote (and see if it has an option to control the satellite receiver). Alternatively, get a new universal remote that will control all of your devices. (The remotes that can be programmed by USB are the easiest to set up.)

I hope this helps.

Cindy Wells

Jul 09, 2011 | DISH Network IR Remote Control

1 Answer

Magnavox blue ray dvd. model nbmgf c need remote code for dish network


Hi there! In order to be able to provide the definite codes that will allow you to program your remote to your Magnavox Blue Ray DVD player, I would need the type of remote that you have- this can be found on the back of your remote, it would be displayed as something along the lines of 3.0, 4.0, 5.0, etc. To obtain a few codes that will likely allow you to successfully program the remote I used 5.0 because it is a common remote that is used with quite a few of our DISH Network receivers. The codes you can try for your DVD player would be, 829 (most successful) if not then please try the following, 685, 533, 554, or 556. After trying those codes if your attempts are still unsuccessful you can also check the manual that came with the DVD player from the manufacturer or just contact us here at DISH Network - although I do know sometimes the remote codes can be located in the manual. Hope the codes help & work for you!

-Kirstie DISH Network

Oct 05, 2010 | DISH Network IR Remote Control

1 Answer

Iwhat is the 4-digit code for a dvr


popselke

We need more clarification on the 4 digit code you need. Are you trying to program the remote to a DVD player or some other device? Could you elaborate on your question?

Ray Calo
DISH Network

Aug 05, 2010 | DISH Network ViP622 DVR DTV Receiver /...

1 Answer

I would like to control my dish network receiver 3100 with my samsung remote


trifonas_ger

If you are trying to use your Samsung TV remote, it will not work with our DISH receiver. Some universal remotes can be programmed to the receiver but you may not get full functionality with the universal remote. Our remotes are designed to allow for functionality for the TV if programmed to the DISH remote (volume, on/off). I hope this helps.

Ray Calo
DISH Network

May 07, 2010 | DISH Network 32 Ir 137180 Remote 5900 3100...

1 Answer

I am trying to control the basic functions of a Samsung HT-Z320 using my Dish remote. Cannot get there using Dish technical support. Is this possible, and if so, how?


rpallot,

I have provided a link on how to program the DISH Network remote to the Samsung TV. The link is:

http://www.dishnetwork.com/SupportSection/remote-setup

A link for the remote codes is also included.

http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml

I hope this helps. If you have any other questions, please respond to this link.

Ray Calo
DISH Network

Jan 08, 2010 | Universal Remote Control DISH Network...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

1,285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76140 Answers

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6032 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...