Question about Konica Minolta Office Equipment & Supplies
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: konica minolta
How about this, if you look what paper tray are avaible from the display pannel, is there a matching size paper tray or is the tray you are trying to use another size then lets say LTR. Is it a different size, if so you may have paper jamed behind the paper tray causing a different paper size, if so remove the jamed paper..... Also, the other suggestion are good as well.
Posted on Oct 09, 2008
look behind the tray for paper....
if not do the folowning
power machine off from main switch sould be on the side or open the front door it;s on bottom left side.hold down the utility botton while powering on keep holdin untel prompted with message ...TROUBLE RESET press it should say ok than powr machine off wait 20sec power back on
hope that help
keep us posted
Posted on Mar 18, 2009
This needs to be setup through the computer using the printer properties, not through the printer. You will need to be the local admin to make the changes. You may also have to go under advance and manual specify the tray and component types. The printer will not allow you to set options for trays and components that are not enabled or detected. Let me know if you need a step-by-step.
Posted on Nov 08, 2009
Testimonial: "2d tray is recognized, print dialogue allows me to click Glossy, but then says CONFLICT and resets to plain paper.Ideas?"
Fuser Code (Hot Unit has over heated) To reset you will need to go to 25 Mode to enter his mode you must turn off the machine then holding down the 2 and 5 button turn on the machine, hold them 25 down for at least 30 second once in 25 mode select SW (soft Switch) select "3" then "2" it should be a "1" change to a "0" then exit and turn off the machine and turn "ON".
Posted on Feb 27, 2010
you may have to under configure in your print driver go to acquire settings and that should update the driver so you can use all 4 trays
Posted on Mar 04, 2010
Tips for a great answer:
Feb 14, 2017 | Konica Minolta Office Equipment & Supplies
Sep 22, 2016 | Konica Minolta Bizhub C452 Color Copier...
Apr 17, 2014 | Konica Minolta Bizhub C454 Color Copier
Feb 27, 2014 | Konica Minolta Bizhub C454 Color Copier
Feb 15, 2014 | Konica Minolta Konica Kit For Bizhub Press...
May 13, 2009 | Konica Minolta bizhub C250 All-In-One...
651 people viewed this question
Usually answered in minutes!
Level 3 Expert
Level 3 Expert
Level 2 Expert